The Port Name is used as the index to this table.
Parsed from file appn.mib.txt
Company: None
Module: Wellfleet-APPN-MIB
The Port Name is used as the index to this table.
Parsed from file Wellfleet-APPN-MIB.mib
Module: Wellfleet-APPN-MIB
Vendor: Wellfleet
Module: Wellfleet-APPN-MIB
[Automatically extracted from oidview.com]
wfAppnNodePortEntry OBJECT-TYPE SYNTAX WfAppnNodePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Port Name is used as the index to this table." INDEX { wfAppnNodePortName } ::= { wfAppnNodePortTable 1 }
wfAppnNodePortEntry OBJECT-TYPE SYNTAX WfAppnNodePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Port Name is used as the index to this table." INDEX { wfAppnNodePortName } ::= { wfAppnNodePortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.14.1.3.1.1 | wfAppnNodePortDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Port … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.2 | wfAppnNodePortDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.3 | wfAppnNodePortName | 0 | 0 | Administratively-assigned name for this APPN port. The name can be from one to eight characters. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.4 | wfAppnNodePortState | 0 | 0 | Indicates the current state of this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.5 | wfAppnNodePortDlcType | 0 | 0 | Indicates the DLC type of this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.6 | wfAppnNodePortPortType | 0 | 0 | Identifies the type of line used by this port. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.7 | wfAppnNodePortSIMRIM | 0 | 0 | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.8 | wfAppnNodePortLsRole | 0 | 0 | Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.9 | wfAppnNodePortMaxRcvBtuSize | 0 | 0 | Maximum Basic Transmission Size (BTU) that a link station on this port can receive. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.10 | wfAppnNodePortMaxIframeWindow | 0 | 0 | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.11 | wfAppnNodePortDefLsGoodXids | 0 | 0 | The total number of successful XIDs that have occurred on all defined link stations on this port since the last time this port wa… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.12 | wfAppnNodePortDefLsBadXids | 0 | 0 | The total number of unsuccessful XIDs that have occurred on all defined link stations on this port since the last time this port … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.13 | wfAppnNodePortDynLsGoodXids | 0 | 0 | The total number of successful XIDs that have occurred on all dynamic link stations on this port since the last time this port wa… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.14 | wfAppnNodePortDynLsBadXids | 0 | 0 | The total number of unsuccessful XIDs that have occurred on all dynamic link stations on this port since the last time this port … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.15 | wfAppnNodePortDlcName | 0 | 0 | This is the 8-character name of the DLC which supports this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.16 | wfAppnNodePortNumber | 0 | 0 | This is a unique number for this Port on the DLC |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.17 | wfAppnNodePortTotLinkActLim | 0 | 0 | This specifies the maximum link activation limit for this Port. The maximum value depends on the LS Role and Port Type, as follo… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.18 | wfAppnNodePortInbLinkActLim | 0 | 0 | This specifies the maximum inbound link activation limit for this Port. This value plus next one must total less than or equal to… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.19 | wfAppnNodePortOutLinkActLim | 0 | 0 | This specifies the maximum outbound link activation limit for this Port. This value plus previous one must total less than or equ… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.20 | wfAppnNodePortActXidExchangeLimit | 0 | 0 | This specifies the maximum number of activation XIDs which will be sent before the Port is considered inoperable |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.21 | wfAppnNodePortNonActXidExchangeLimit | 0 | 0 | This specifies the maximum number of non-activation XIDs which will be sent before the Port is considered inoperable |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.22 | wfAppnNodePortLsXmitRcvCap | 0 | 0 | This specifies if the Port can receive Two-Way Simultaneous or Two-Way Alternate |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.23 | wfAppnNodePortTargetPacingCount | 0 | 0 | This specifies the target pacing count for BINDs on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.24 | wfAppnNodePortMaxSendBtuSize | 0 | 0 | This specifies the Maximum BTU Size which can be sent out this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.25 | wfAppnNodePortImplicitCpSessions | 0 | 0 | This specifies whether CP-CP sessions are permitted with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.26 | wfAppnNodePortImplicitLimResource | 0 | 0 | This specifies whether implicit link stations on this Port should be defined as limited resources |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.27 | wfAppnNodePortImplicitEffCap | 0 | 0 | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and max… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.28 | wfAppnNodePortImplicitConnCost | 0 | 0 | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cos… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.29 | wfAppnNodePortImplicitByteCost | 0 | 0 | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned v… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.30 | wfAppnNodePortImplicitSecurity | 0 | 0 | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.31 | wfAppnNodePortImplicitDelay | 0 | 0 | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.32 | wfAppnNodePortImplicitUsr1 | 0 | 0 | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with T… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.33 | wfAppnNodePortImplicitUsr2 | 0 | 0 | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with … |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.34 | wfAppnNodePortImplicitUsr3 | 0 | 0 | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value for use with T… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.35 | wfAppnNodePortImplicitHprDisable | 0 | 0 | This specifies if HPR can be used with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.36 | wfAppnNodePortImplicitHprLlErrorDisable | 0 | 0 | This specifies if Link-Level Error recovery is to be used on implicit link stations which support HPR on this Port. NOTE: This fi… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.37 | wfAppnNodePortImplicitLinkDeactTime | 0 | 0 | This indicates the time in seconds before implicit Link Stations on this Port will be deactivated if it is an HPR limited Resour… |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.38 | wfAppnNodePortDlcData | 0 | 0 | This specifies the local DLC address to be used by this port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.39 | wfAppnNodePortHprDlcData | 0 | 0 | This specifies the HPR address to be used by this port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.40 | wfAppnNodePortImplicitDlurDisable | 0 | 0 | This specifies if HPR can be used with implicit link stations on this Port |
| 1.3.6.1.4.1.18.3.5.14.1.3.1.41 | wfAppnNodePortImplicitUplinkToEN | 0 | 0 | For BrNN specifies whether the implicit Link Stations off this port are uplink or downlink if the adjacent node is an EN. |