An entry in wfAppnNodePortTable.
This table is indexed by the link station name
Parsed from file appn.mib.txt
Company: None
Module: Wellfleet-APPN-MIB
An entry in wfAppnNodePortTable.
This table is indexed by the link station name
Parsed from file Wellfleet-APPN-MIB.mib
Module: Wellfleet-APPN-MIB
Vendor: Wellfleet
Module: Wellfleet-APPN-MIB
[Automatically extracted from oidview.com]
wfAppnNodeLsEntry OBJECT-TYPE SYNTAX WfAppnNodeLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnNodePortTable. This table is indexed by the link station name" INDEX { wfAppnNodeLsName } ::= { wfAppnNodeLsTable 1 }
wfAppnNodeLsEntry OBJECT-TYPE SYNTAX WfAppnNodeLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfAppnNodePortTable. This table is indexed by the link station name" INDEX { wfAppnNodeLsName } ::= { wfAppnNodeLsTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.14.1.4.1.1 | wfAppnNodeLsDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a Link … |
1.3.6.1.4.1.18.3.5.14.1.4.1.2 | wfAppnNodeLsDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this … |
1.3.6.1.4.1.18.3.5.14.1.4.1.3 | wfAppnNodeLsName | 0 | 0 | Administratively-assigned name for the link station. The name can be from one to eight characters. |
1.3.6.1.4.1.18.3.5.14.1.4.1.4 | wfAppnNodeLsPortName | 0 | 0 | Administratively-assigned name for the port. The name can be from one to eight characters. |
1.3.6.1.4.1.18.3.5.14.1.4.1.5 | wfAppnNodeLsState | 0 | 0 | State of this link station. |
1.3.6.1.4.1.18.3.5.14.1.4.1.6 | wfAppnNodeLsCpName | 0 | 0 | Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is n… |
1.3.6.1.4.1.18.3.5.14.1.4.1.7 | wfAppnNodeLsTgNum | 0 | 0 | Number associated with the TG to this link station. Range ( 1 - 20) Predefined values for auto-activation |
1.3.6.1.4.1.18.3.5.14.1.4.1.8 | wfAppnNodeLsLimResource | 0 | 0 | Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions. |
1.3.6.1.4.1.18.3.5.14.1.4.1.9 | wfAppnNodeLsMigration | 0 | 0 | Indicates whether this link station will be used for connections to down-level or migration partners. 1 Indicates that this is a … |
1.3.6.1.4.1.18.3.5.14.1.4.1.10 | wfAppnNodeLsBlockNum | 0 | 0 | The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurabl… |
1.3.6.1.4.1.18.3.5.14.1.4.1.11 | wfAppnNodeLsIdNum | 0 | 0 | The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the … |
1.3.6.1.4.1.18.3.5.14.1.4.1.12 | wfAppnNodeLsCpCpSession | 0 | 0 | Indicates whether CP-CP sessions are supported by this link station. |
1.3.6.1.4.1.18.3.5.14.1.4.1.13 | wfAppnNodeLsTargetPacingCount | 0 | 0 | Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is signifi… |
1.3.6.1.4.1.18.3.5.14.1.4.1.14 | wfAppnNodeLsMaxSendBtuSize | 0 | 0 | Numeric value between 0 and 4105 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be … |
1.3.6.1.4.1.18.3.5.14.1.4.1.15 | wfAppnNodeLsEffCap | 0 | 0 | The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and max… |
1.3.6.1.4.1.18.3.5.14.1.4.1.16 | wfAppnNodeLsConnCost | 0 | 0 | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cos… |
1.3.6.1.4.1.18.3.5.14.1.4.1.17 | wfAppnNodeLsByteCost | 0 | 0 | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned v… |
1.3.6.1.4.1.18.3.5.14.1.4.1.18 | wfAppnNodeLsSecurity | 0 | 0 | The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This… |
1.3.6.1.4.1.18.3.5.14.1.4.1.19 | wfAppnNodeLsDelay | 0 | 0 | Relative amount of time that it takes for a signal to travel the length of the logical link. This is an administratively assigned… |
1.3.6.1.4.1.18.3.5.14.1.4.1.20 | wfAppnNodeLsUsr1 | 0 | 0 | First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with… |
1.3.6.1.4.1.18.3.5.14.1.4.1.21 | wfAppnNodeLsUsr2 | 0 | 0 | Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated wit… |
1.3.6.1.4.1.18.3.5.14.1.4.1.22 | wfAppnNodeLsUsr3 | 0 | 0 | Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with… |
1.3.6.1.4.1.18.3.5.14.1.4.1.23 | wfAppnNodeLsCpType | 0 | 0 | This specifies the APPN Node type of Link Station. |
1.3.6.1.4.1.18.3.5.14.1.4.1.24 | wfAppnNodeLsAutoActivateDisable | 0 | 0 | This specifies if the link should be automatically activated when the Port becomes active. Should be disabled if CP-CP sessions… |
1.3.6.1.4.1.18.3.5.14.1.4.1.25 | wfAppnNodeLsSolicitSscpSessionsDisable | 0 | 0 | This specifies if SSCP Sessions should be solicited from this Link Station |
1.3.6.1.4.1.18.3.5.14.1.4.1.26 | wfAppnNodeLsUseDefaultTgChars | 0 | 0 | Indicates whether the default TG characteristics specified for the Port should be used for this link station, or if explicit TG c… |
1.3.6.1.4.1.18.3.5.14.1.4.1.27 | wfAppnNodeLsLinkData | 0 | 0 | this for Link Address (MAC/SAP, SDLC Address) |
1.3.6.1.4.1.18.3.5.14.1.4.1.28 | wfAppnNodeLsDlurDisable | 0 | 0 | This specifies if the adjacent Link Station is a node to be serviced by DLUR. |
1.3.6.1.4.1.18.3.5.14.1.4.1.29 | wfAppnNodeLsDspuName | 0 | 0 | 8-byte name of the downstream PU supported by DLUR. |
1.3.6.1.4.1.18.3.5.14.1.4.1.30 | wfAppnNodeLsDlusName | 0 | 0 | Fully-qualified name of the DLUS node which will serve this DLUR Link Station. |
1.3.6.1.4.1.18.3.5.14.1.4.1.31 | wfAppnNodeLsBackupDlusName | 0 | 0 | Fully-qualified name of the backup DLUS node which may serve this DLUR Link Station. |
1.3.6.1.4.1.18.3.5.14.1.4.1.32 | wfAppnNodeLsHprDisable | 0 | 0 | This specifies if HPR is supported on this Link Station |
1.3.6.1.4.1.18.3.5.14.1.4.1.33 | wfAppnNodeLsHprLlErrorDisable | 0 | 0 | This specifies if Link-Level Error recovery is to be used on this link station. NOTE: This field does not enable/disable HPRs sel… |
1.3.6.1.4.1.18.3.5.14.1.4.1.34 | wfAppnNodeLsLinkDeactTime | 0 | 0 | This indicates the time in seconds before this Link Station will be deactivated if it is an HPR limited Resource. |
1.3.6.1.4.1.18.3.5.14.1.4.1.35 | wfAppnNodeLsLinkRetryCount | 0 | 0 | This indicates for how many times will APPN CP component retry to restart the link station before it gives up, 99 default is for… |
1.3.6.1.4.1.18.3.5.14.1.4.1.36 | wfAppnNodeLsBranchLinkType | 0 | 0 | For BrNN specifies whether the link is an uplink or a downlink |
1.3.6.1.4.1.18.3.5.14.1.4.1.37 | wfAppnNodeLsAdjBrNNLinkSupp | 0 | 0 | Specifies whether the adjacent node is required, allowed or prohibited from being a BrNN ( i.e. an BrNN showing its NN face ). |
1.3.6.1.4.1.18.3.5.14.1.4.1.38 | wfAppnNodeLsDefaultNNS | 0 | 0 | This field can be set to yes to indicate that the adjacent CP is the preferred NN server |