Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete a PIM interface.
Parsed from file pim.mib.txt
Company: None
Module: Wellfleet-PIM-MIB
Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete a PIM interface.
Parsed from file Wellfleet-PIM-MIB.mib
Module: Wellfleet-PIM-MIB
Vendor: Wellfleet
Module: Wellfleet-PIM-MIB
[Automatically extracted from oidview.com]
wfPimIfDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a PIM interface." DEFVAL { created } ::= { wfPimIfEntry 1 }
wfPimIfDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a PIM interface." DEFVAL { created } ::= { wfPimIfEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.14.2.1.2 | wfPimIfDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a PIM inter… |
1.3.6.1.4.1.18.3.5.3.14.2.1.3 | wfPimIfState | 0 | 0 | The current state of the PIM interface. This state is up when the underlying IGMP is up and PIM global is created and enabled. T… |
1.3.6.1.4.1.18.3.5.3.14.2.1.4 | wfPimIfCct | 0 | 0 | The Circuit Number that this interface runs over |
1.3.6.1.4.1.18.3.5.3.14.2.1.5 | wfPimIfIpAddress | 0 | 0 | The IP Address to which this entry's addressing information pertains |
1.3.6.1.4.1.18.3.5.3.14.2.1.6 | wfPimIfIpMask | 0 | 0 | The network mask for the IP address of the PIM interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.7 | wfPimIfHelloInterval | 0 | 0 | The frequency at which PIM Hello messages are transmitted on this PIM interface. Recommends a higher number for slower speed ser… |
1.3.6.1.4.1.18.3.5.3.14.2.1.8 | wfPimIfMode | 0 | 0 | Configure this interface for Sparse Mode or Dense Mode |
1.3.6.1.4.1.18.3.5.3.14.2.1.9 | wfPimIfCacheTimeOut | 0 | 0 | How long an entry should remain in the PIM cache before being timed out and deleted |
1.3.6.1.4.1.18.3.5.3.14.2.1.10 | wfPimIfDefaultGlobalJoinPruneIntervalDisable | 0 | 0 | If enabled, the Join/Prune interval used on this interface will be the one defined in pim global wfPimJoinPruneInterval. If disa… |
1.3.6.1.4.1.18.3.5.3.14.2.1.11 | wfPimIfJoinPruneInterval | 0 | 0 | The interval at which periodic PIM-SM Join/Prune messages are transmitted on this PIM interface. This will only be in effect if wf… |
1.3.6.1.4.1.18.3.5.3.14.2.1.12 | wfPimIfDownstreamIgmpRelayEnable | 0 | 0 | Enable/disable support for IGMP Relay as downstream router. By default, we disable this support. By enabling this support, PIM ro… |
1.3.6.1.4.1.18.3.5.3.14.2.1.13 | wfPimIfLocalDRPriority | 0 | 0 | The DR Election Priority option is used when people want to have control over which router is elected as the DR, irrespective of … |
1.3.6.1.4.1.18.3.5.3.14.2.1.14 | wfPimIfDR | 0 | 0 | The Designated Router on this PIM interface. For point- to-point interfaces, this object has the value 0.0.0.0. |
1.3.6.1.4.1.18.3.5.3.14.2.1.15 | wfPimIfDRPriority | 0 | 0 | The elected Designated Router priority on the LAN which connects to this PIM interface. If this is zero, it indicates the DR is e… |
1.3.6.1.4.1.18.3.5.3.14.2.1.16 | wfPimIfInHellos | 0 | 0 | Number of Pim Hello packets recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.17 | wfPimIfOutHellos | 0 | 0 | Number of Pim Hello packets sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.18 | wfPimIfInPrunes | 0 | 0 | The number of prunes this circuit has recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.19 | wfPimIfOutPrunes | 0 | 0 | The number of prunes this circuit has sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.20 | wfPimIfInGrafts | 0 | 0 | The number of grafts this circuit has recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.21 | wfPimIfOutGrafts | 0 | 0 | The number of grafts this circuit has sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.22 | wfPimIfInCRPAdvs | 0 | 0 | Number of C-RP-Adv packets received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.23 | wfPimIfOutCRPAdvs | 0 | 0 | Number of C-RP-Adv packets transmitted out of this interface |
1.3.6.1.4.1.18.3.5.3.14.2.1.24 | wfPimIfInRPSets | 0 | 0 | Number of RP-Set packets received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.25 | wfPimIfOutRPSets | 0 | 0 | Number of RP-Set packets send out of this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.26 | wfPimIfInRegisters | 0 | 0 | Number of Register messages received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.27 | wfPimIfOutRegisters | 0 | 0 | Number of Register messages sent from this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.28 | wfPimIfInRegStop | 0 | 0 | Number of Register Stop packets received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.29 | wfPimIfOutRegStop | 0 | 0 | Number of Register Stop packets sent from this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.30 | wfPimIfInJoinPrunes | 0 | 0 | The number of Join/Prunes this circuit has recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.31 | wfPimIfOutJoinPrunes | 0 | 0 | The number of Join/Prunes this circuit has sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.32 | wfPimIfBootstrapBorder | 0 | 0 | Define whether this PIM interface is a PIM Bootstrap Border interface or not. When set to enable, it is a border interface and bo… |
1.3.6.1.4.1.18.3.5.3.14.2.1.33 | wfPimIfOifDeleteDelay | 0 | 0 | The number of seconds the Outgoing Inteface deletion delay should be. According to RFC, it should be 1/3 of holdtime, which gives… |