The elected Designated Router priority on the LAN which
connects to this PIM interface. If this is zero, it
indicates the DR is elected using the highest ip address.
Otherwise priority mechanism is used.
Parsed from file pim.mib.txt
Company: None
Module: Wellfleet-PIM-MIB
The elected Designated Router priority on the LAN which
connects to this PIM interface. If this is zero, it
indicates the DR is elected using the highest ip address.
Otherwise priority mechanism is used.
Parsed from file Wellfleet-PIM-MIB.mib
Module: Wellfleet-PIM-MIB
Vendor: Wellfleet
Module: Wellfleet-PIM-MIB
[Automatically extracted from oidview.com]
wfPimIfDRPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The elected Designated Router priority on the LAN which connects to this PIM interface. If this is zero, it indicates the DR is elected using the highest ip address. Otherwise priority mechanism is used." DEFVAL { 1 } ::= { wfPimIfEntry 15 }
wfPimIfDRPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The elected Designated Router priority on the LAN which connects to this PIM interface. If this is zero, it indicates the DR is elected using the highest ip address. Otherwise priority mechanism is used." DEFVAL { 1 } ::= { wfPimIfEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.14.2.1.1 | wfPimIfDelete | 0 | 0 | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete a PIM interfa… |
1.3.6.1.4.1.18.3.5.3.14.2.1.2 | wfPimIfDisable | 0 | 0 | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable a PIM inter… |
1.3.6.1.4.1.18.3.5.3.14.2.1.3 | wfPimIfState | 0 | 0 | The current state of the PIM interface. This state is up when the underlying IGMP is up and PIM global is created and enabled. T… |
1.3.6.1.4.1.18.3.5.3.14.2.1.4 | wfPimIfCct | 0 | 0 | The Circuit Number that this interface runs over |
1.3.6.1.4.1.18.3.5.3.14.2.1.5 | wfPimIfIpAddress | 0 | 0 | The IP Address to which this entry's addressing information pertains |
1.3.6.1.4.1.18.3.5.3.14.2.1.6 | wfPimIfIpMask | 0 | 0 | The network mask for the IP address of the PIM interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.7 | wfPimIfHelloInterval | 0 | 0 | The frequency at which PIM Hello messages are transmitted on this PIM interface. Recommends a higher number for slower speed ser… |
1.3.6.1.4.1.18.3.5.3.14.2.1.8 | wfPimIfMode | 0 | 0 | Configure this interface for Sparse Mode or Dense Mode |
1.3.6.1.4.1.18.3.5.3.14.2.1.9 | wfPimIfCacheTimeOut | 0 | 0 | How long an entry should remain in the PIM cache before being timed out and deleted |
1.3.6.1.4.1.18.3.5.3.14.2.1.10 | wfPimIfDefaultGlobalJoinPruneIntervalDisable | 0 | 0 | If enabled, the Join/Prune interval used on this interface will be the one defined in pim global wfPimJoinPruneInterval. If disa… |
1.3.6.1.4.1.18.3.5.3.14.2.1.11 | wfPimIfJoinPruneInterval | 0 | 0 | The interval at which periodic PIM-SM Join/Prune messages are transmitted on this PIM interface. This will only be in effect if wf… |
1.3.6.1.4.1.18.3.5.3.14.2.1.12 | wfPimIfDownstreamIgmpRelayEnable | 0 | 0 | Enable/disable support for IGMP Relay as downstream router. By default, we disable this support. By enabling this support, PIM ro… |
1.3.6.1.4.1.18.3.5.3.14.2.1.13 | wfPimIfLocalDRPriority | 0 | 0 | The DR Election Priority option is used when people want to have control over which router is elected as the DR, irrespective of … |
1.3.6.1.4.1.18.3.5.3.14.2.1.14 | wfPimIfDR | 0 | 0 | The Designated Router on this PIM interface. For point- to-point interfaces, this object has the value 0.0.0.0. |
1.3.6.1.4.1.18.3.5.3.14.2.1.16 | wfPimIfInHellos | 0 | 0 | Number of Pim Hello packets recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.17 | wfPimIfOutHellos | 0 | 0 | Number of Pim Hello packets sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.18 | wfPimIfInPrunes | 0 | 0 | The number of prunes this circuit has recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.19 | wfPimIfOutPrunes | 0 | 0 | The number of prunes this circuit has sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.20 | wfPimIfInGrafts | 0 | 0 | The number of grafts this circuit has recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.21 | wfPimIfOutGrafts | 0 | 0 | The number of grafts this circuit has sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.22 | wfPimIfInCRPAdvs | 0 | 0 | Number of C-RP-Adv packets received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.23 | wfPimIfOutCRPAdvs | 0 | 0 | Number of C-RP-Adv packets transmitted out of this interface |
1.3.6.1.4.1.18.3.5.3.14.2.1.24 | wfPimIfInRPSets | 0 | 0 | Number of RP-Set packets received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.25 | wfPimIfOutRPSets | 0 | 0 | Number of RP-Set packets send out of this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.26 | wfPimIfInRegisters | 0 | 0 | Number of Register messages received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.27 | wfPimIfOutRegisters | 0 | 0 | Number of Register messages sent from this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.28 | wfPimIfInRegStop | 0 | 0 | Number of Register Stop packets received on this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.29 | wfPimIfOutRegStop | 0 | 0 | Number of Register Stop packets sent from this interface. |
1.3.6.1.4.1.18.3.5.3.14.2.1.30 | wfPimIfInJoinPrunes | 0 | 0 | The number of Join/Prunes this circuit has recieved |
1.3.6.1.4.1.18.3.5.3.14.2.1.31 | wfPimIfOutJoinPrunes | 0 | 0 | The number of Join/Prunes this circuit has sent |
1.3.6.1.4.1.18.3.5.3.14.2.1.32 | wfPimIfBootstrapBorder | 0 | 0 | Define whether this PIM interface is a PIM Bootstrap Border interface or not. When set to enable, it is a border interface and bo… |
1.3.6.1.4.1.18.3.5.3.14.2.1.33 | wfPimIfOifDeleteDelay | 0 | 0 | The number of seconds the Outgoing Inteface deletion delay should be. According to RFC, it should be 1/3 of holdtime, which gives… |