The number of entries processed before this gate pends
Parsed from file iisis.mib.txt
Company: None
Module: BayNetworks-IISIS-MIB
The number of entries processed before this gate pends
Parsed from file BayNetworks-IISIS-MIB.mib
Module: BayNetworks-IISIS-MIB
Vendor: Wellfleet
Module: BayNetworks-IISIS-MIB
[Automatically extracted from oidview.com]
wfIisisAgePend OBJECT-TYPE SYNTAX INTEGER(10..100) ACCESS read-write STATUS mandatory DESCRIPTION "The number of entries processed before this gate pends" DEFVAL { 50 } ::= { wfIisisGeneralGroup 32 }
wfIisisAgePend OBJECT-TYPE SYNTAX INTEGER(10..100) ACCESS read-write STATUS mandatory DESCRIPTION "The number of entries processed before this gate pends" DEFVAL { 50 } ::= { wfIisisGeneralGroup 32 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.8.1.32.0 | wfIisisAgePend | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.8.1.1 | wfIisisGeneralDelete | 1 | 1 | 'This value determines whether I-ISIS is configured' |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.2 | wfIisisGeneralDisable | 1 | 1 | 'The administrative status of I-ISIS in the router. The value 'enabled' denotes that the I-ISIS Process is active on at least on… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.3 | wfIisisGeneralState | 1 | 1 | 'The state of I-ISIS' |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.4 | wfIisisRouterId | 1 | 1 | This value contains the system ID of this Intermediate System. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.5 | wfIisisVersion | 1 | 1 | This read-only parameter identifies the version number of the IS-IS protocol to which this node conforms to. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.6 | wfIisisRouterType | 1 | 1 | This value determines whether this system is L1 only router L2 only router or L1-L2 IS. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.7 | wfIisisSpfHoldDown | 1 | 1 | Hold Down Timer for the SPF (in seconds). The SPF will run at most once per hold down timer value. A value of 0 means no hold d… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.8 | wfIisisPrimaryLogMask | 1 | 1 | A parameter to specify which I-ISIS log messages should be logged. This will only effect the Primary I-ISIS gate. Each bit repres… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.9 | wfIisisMaximumPath | 1 | 1 | Maximum number of equal cost paths allowed for a network installed by OSPF. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.10 | wfIisisMaxAreas | 1 | 1 | This value defines the maximum allowable number of areas addresses for the domain that this router exists in. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.11 | wfIisisNumL1Lsps | 1 | 1 | Number of L2 LSPS stored in the database |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.12 | wfIisisNumL2Lsps | 1 | 1 | Number of L2 LSPS stored in the database |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.13 | wfIisisCksumIsPdus | 1 | 1 | This value indicates whether ISIS PDUs will carry a checksum. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.14 | wfIisisL1LspPassword | 1 | 1 | This assigns a password such that only L1 Lsps with the matching password will be accepted. All L1 Lsps generated by this system… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.15 | wfIisisL2LspPassword | 1 | 1 | This assigns a password such that only L2 Lsps with the matching password will be accepted. All L2 Lsps generated by this system… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.16 | wfIisisAreaAddr | 1 | 1 | This Assigns the area address for this router. This field must be filled in. If the user doesn't enter a value, then assign 0x470… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.17 | wfIisisAreaAddrAlias1 | 1 | 1 | This Assigns the first area address alias for this router. This field does no have to be filled in, but if the user tries to ente… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.18 | wfIisisAreaAddrAlias2 | 1 | 1 | This Assigns the second area address alias for this router. This field does no have to be filled in, but if the user tries to ent… |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.19 | wfIisisL1CorruptedLsps | 1 | 1 | Number of Corrupted L1-Lsps Detected. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.20 | wfIisisL2CorruptedLsps | 1 | 1 | Number of Corrupted L2-Lsps Detected. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.21 | wfIisisL1LspDbOverLoads | 1 | 1 | Number of times the L1 Lsp Database Overload event has been generated. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.22 | wfIisisL2LspDbOverLoads | 1 | 1 | Number of times the L2Lsp Database Overload event has been generated. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.23 | wfIisisNearestL2Is | 1 | 1 | This is the ID of the nearest L2 system in this area. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.24 | wfIisisNumL1Routes | 1 | 1 | Number of L1 Routes. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.25 | wfIisisNumL2Routes | 1 | 1 | Number of L2 Routes. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.26 | wfIisisMinLSPGenerationInterval | 1 | 1 | Min time interval(in secs) before LSP generation |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.27 | wfIisisMaxLSPGenerationInterval | 1 | 1 | Max time interval(in secs) before LSP generation |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.28 | wfIisisMaxAge | 1 | 1 | The lifetime of the lsp after which it will be considered expired |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.29 | wfIisisMinLSPXmtInterval | 1 | 1 | None |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.30 | wfIisisPartialSNPInterval | 1 | 1 | None |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.31 | wfIisisZeroAgeLifetime | 1 | 1 | If the remaining lifetime of an LSP reaches zero, the expired LSP will be kept in the database for this time (in seconds) |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.33 | wfIisisCsnpBuildInterval | 1 | 1 | The interval at which CSNPs are generated by the Designated IS |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.34 | wfIisisL2LspBufferSize | 1 | 1 | The max size of the LSP generated by system |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.35 | wfIisisL1SpfCnt | 1 | 1 | The number of times the L1 I-ISIS SPF algorithm has been run for this area. |
| 1.3.6.1.4.1.18.3.5.3.2.8.1.36 | wfIisisL2SpfCnt | 1 | 1 | The number of times the L2 I-ISIS SPF algorithm has been run for this area. |