Vendor: Wellfleet
Module: Wellfleet-NLSP-MIB (nlsp.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
wfNlspSys OBJECT IDENTIFIER ::= { wfNlspGroup 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.5.128.1.1 | wfNlspSysDelete | 1 | 1 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete NLSP. |
1.3.6.1.4.1.18.3.5.5.128.1.2 | wfNlspSysDisable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable NLSP. |
1.3.6.1.4.1.18.3.5.5.128.1.3 | wfNlspSysModuleState | 1 | 1 | The current state of the entire NLSP. |
1.3.6.1.4.1.18.3.5.5.128.1.4 | wfNlspSysNodeName | 1 | 1 | The name for this router from IPX. |
1.3.6.1.4.1.18.3.5.5.128.1.5 | wfNlspSysCfgID | 1 | 1 | The System ID assigned by the user. |
1.3.6.1.4.1.18.3.5.5.128.1.6 | wfNlspSysInternalNetworkNumber | 1 | 1 | The internal network number of this router from IPX. |
1.3.6.1.4.1.18.3.5.5.128.1.7 | wfNlspSysState | 1 | 1 | NLSP operational state. |
1.3.6.1.4.1.18.3.5.5.128.1.8 | wfNlspSysHtblSize | 1 | 1 | Size of Primary hash table. The default is 1023 entries. The size should reside between 16 and 4096 entries. |
1.3.6.1.4.1.18.3.5.5.128.1.9 | wfNlspSysEnforceScalability | 1 | 1 | Either enable or disable. When enabled, all network numbers have a prefix which matches one of the configured area addresses. |
1.3.6.1.4.1.18.3.5.5.128.1.10 | wfNlspSysExpandedMode | 1 | 1 | When enabled, NLSP is allowed to exist on a slot even without any local NLSP interface configured. When disabled, majority of NLS… |
1.3.6.1.4.1.18.3.5.5.128.1.11 | wfNlspSysFilterLogMsgType | 1 | 1 | NLSP Event Description Log filter. When configured the specific event will not be included in the log. |
1.3.6.1.4.1.18.3.5.5.128.1.12 | wfNlspSysMinNonBcastLSPTransInt | 1 | 1 | The minimum interval, in seconds, between transmission of LSPs on a non-broadcast circuit. The default is 10 seconds. This value… |
1.3.6.1.4.1.18.3.5.5.128.1.13 | wfNlspSysMinBcastLSPTransInt | 1 | 1 | The minimum interval, in seconds, between transmission of LSPs on a broadcast circuit. The default is 5 seconds. This value shou… |
1.3.6.1.4.1.18.3.5.5.128.1.14 | wfNlspSysMinLSPGenInt | 1 | 1 | The minimum interval, in seconds, between the generation of the same LSP. The default is 5 seconds. This value should reside betw… |
1.3.6.1.4.1.18.3.5.5.128.1.15 | wfNlspSysMaxLSPGenInt | 1 | 1 | The maximum interval, in seconds, between the generation of the same LSP. The default value is 7200 seconds. This value should r… |
1.3.6.1.4.1.18.3.5.5.128.1.16 | wfNlspSysMaxLSPAge | 1 | 1 | The value, in seconds, placed in the lifetime field of LSPs generated by this instance of NLSP. The default is 7500 seconds. Thi… |
1.3.6.1.4.1.18.3.5.5.128.1.17 | wfNlspSysBcastHelloInt | 1 | 1 | The interval, in seconds, at which NLSP Hellos will be sent on a broadcast circuit, if this system is not the designated router. … |
1.3.6.1.4.1.18.3.5.5.128.1.18 | wfNlspSysNonBcastHelloInt | 1 | 1 | The interval, in seconds, at which NLSP Hellos will be sent on a non-broadcast circuit. The default is 5 seconds. This value shou… |
1.3.6.1.4.1.18.3.5.5.128.1.19 | wfNlspSysDRBcastHelloInt | 1 | 1 | The interval, in seconds, at which the designated router sends NLSP Hellos on a broadcast circuit. The default is 3 seconds. Thi… |
1.3.6.1.4.1.18.3.5.5.128.1.20 | wfNlspSysHoldTimeMultiplier | 1 | 1 | The holding time multiplier used to specify the holding time for NLSP neighbor entries as a function of the NLSP Hello interval. … |
1.3.6.1.4.1.18.3.5.5.128.1.21 | wfNlspSysCompSNPInt | 1 | 1 | The interval, in seconds, between generation of Complete Sequence Number Packets by a designated router on a broadcast circuit. … |
1.3.6.1.4.1.18.3.5.5.128.1.22 | wfNlspSysPartSNPInt | 1 | 1 | The minimum interval, in seconds, between transmission of Partial Sequence Number Packets. The default is 5 seconds. This value … |
1.3.6.1.4.1.18.3.5.5.128.1.23 | wfNlspSysWaitTime | 1 | 1 | The number of seconds to delay in the waiting state before entering the on state. The default is 120 seconds. This value should … |
1.3.6.1.4.1.18.3.5.5.128.1.24 | wfNlspSysOrigL1LSPBufSize | 1 | 1 | The maximum size of Level 1 LSPs originated by this instance of NLSP. The default is 512 bytes. This value should reside between… |
1.3.6.1.4.1.18.3.5.5.128.1.25 | wfNlspSysVersion | 1 | 1 | The version number of this instance of NLSP. |
1.3.6.1.4.1.18.3.5.5.128.1.26 | wfNlspSysCorrLSPs | 1 | 1 | The number of corrupt LSPs detected. |
1.3.6.1.4.1.18.3.5.5.128.1.27 | wfNlspSysL1Overloaded | 1 | 1 | Indicates whether the NLSP Level 1 database is overloaded. |
1.3.6.1.4.1.18.3.5.5.128.1.28 | wfNlspSysL1DBaseOverloads | 1 | 1 | The number of times the NLSP Level 1 LSP database has become overloaded. |
1.3.6.1.4.1.18.3.5.5.128.1.29 | wfNlspSysMaxSeqNums | 1 | 1 | The number of times the router has attempted to exceed NLSP's maximum sequence number. |
1.3.6.1.4.1.18.3.5.5.128.1.30 | wfNlspSysSeqNumSkips | 1 | 1 | The number of times a sequence number skip has occurred. |
1.3.6.1.4.1.18.3.5.5.128.1.31 | wfNlspSysTransmittedLSPs | 1 | 1 | The number of LSPs transmitted by this system. |
1.3.6.1.4.1.18.3.5.5.128.1.32 | wfNlspSysReceivedLSPs | 1 | 1 | The number of LSPs received by this system. |
1.3.6.1.4.1.18.3.5.5.128.1.33 | wfNlspSysOwnLSPPurges | 1 | 1 | The number of times a zero-aged copy of the router's own LSP has been received from some other node. |
1.3.6.1.4.1.18.3.5.5.128.1.34 | wfNlspSysVersionErrors | 1 | 1 | The number of times that a received NLSP packet was rejected because its version number was invalid. |
1.3.6.1.4.1.18.3.5.5.128.1.35 | wfNlspSysIncorrectPackets | 1 | 1 | The number of times that an incorrectly formatted NLSP packet was received. |
1.3.6.1.4.1.18.3.5.5.128.1.36 | wfNlspSysNearestL2Default | 1 | 1 | Indicates whether this instance of NLSP knows of a NLSP Level 2 router that currently can reach other areas using the default met… |
1.3.6.1.4.1.18.3.5.5.128.1.37 | wfNlspSysNearestL2DefaultRouter | 1 | 1 | The system ID of the nearest NLSP Level 2 router that currently can reach other areas using the default metric. The value is und… |
1.3.6.1.4.1.18.3.5.5.128.1.38 | wfNlspSysResourceFailures | 1 | 1 | The number of times this instance of the NLSP has been unable to obtain needed resources (memory, etc.) |
1.3.6.1.4.1.18.3.5.5.128.1.39 | wfNlspSysTotNumIntf | 1 | 1 | The total number of interfaces configured. This includes all interfaces that are enabled AND disabled. |
1.3.6.1.4.1.18.3.5.5.128.1.40 | wfNlspSysTotNumIntfEnabled | 1 | 1 | The total number of interfaces that are enabled. |
1.3.6.1.4.1.18.3.5.5.128.1.41 | wfNlspSysTotNumAreaCfg | 1 | 1 | The total number of areas configured. This includes all areas that are enabled AND disabled. |
1.3.6.1.4.1.18.3.5.5.128.1.42 | wfNlspSysTotNumAreaUsed | 1 | 1 | The total number of areas that are enabled. |
1.3.6.1.4.1.18.3.5.5.128.1.43 | wfNlspSysID | 1 | 1 | The System ID used. |
1.3.6.1.4.1.18.3.5.5.128.1.44 | wfNlspSysTotNumDijkstraRun | 1 | 1 | The total number of Dijkstra executions. |
1.3.6.1.4.1.18.3.5.5.128.1.45 | wfNlspSysCT | 1 | 1 | The NLSP Certification Test compatible flag. |
1.3.6.1.4.1.18.3.5.5.128.1.46 | wfNlspSysMaximumPath | 1 | 1 | The Maximum Path to a destination net from IPX. |
1.3.6.1.4.1.18.3.5.5.128.1.47 | wfNlspSysSlotMask | 1 | 1 | Slot mask for which slots NLSP is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot… |
1.3.6.1.4.1.18.3.5.5.128.1.48 | wfNlspSysDebugDump | 1 | 1 | To dump an internal database for debugging purpose; only applicable on an image with NLSP module compiled with DEBUG flag. Inter… |
1.3.6.1.4.1.18.3.5.5.128.1.49 | wfNlspSysDebugStat | 1 | 1 | To collect statistics of some internal database for debugging purpose; only applicable on an image with NLSP module compiled with… |
1.3.6.1.4.1.18.3.5.5.128.1.50 | wfNlspSysDebugLogLevel | 1 | 1 | To controll the level of log messages logging for debugging purpose; only applicable on an image with NLSP module compiled with D… |
1.3.6.1.4.1.18.3.5.5.128.1.51 | wfNlspSysDebugLogModule | 1 | 1 | To controll log messages logging within modules for debugging purpose; only applicable on an image with NLSP module compiled with… |
1.3.6.1.4.1.18.3.5.5.128.1.52 | wfNlspSysNetCount | 1 | 1 | The total number of networks stored in the NLSP route database. This includes both reachable and unreachable networks. |
1.3.6.1.4.1.18.3.5.5.128.1.53 | wfNlspSysSvrCount | 1 | 1 | The total number of services stored in the NLSP service database. This includes both reachable and unreachable services. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.5.128.2 | wfNlspSysAreaTable | 1 | 13 | System AreaID Table The System AreaID table contains all the areas that were configured for this router. |
1.3.6.1.4.1.18.3.5.5.128.3 | wfNlspSysAreaAliasTable | 1 | 7 | System Area Alias Table The System Area Alias table contains all the area aliases configured per Area for this router. |
1.3.6.1.4.1.18.3.5.5.128.4 | wfNlspSysActAreaAliasTable | 1 | 9 | Actual Area Alias Table. The Actual Area Alias table contains the area aliases actually used by NLSP on this router per area. |
1.3.6.1.4.1.18.3.5.5.128.5 | wfNlspIntfTable | 1 | 34 | wfNlspIntftable |
1.3.6.1.4.1.18.3.5.5.128.6 | wfNlspDestTable | 1 | 10 | Destination Table The Destination table contains additional NLSP forwarding information about all destinations learned via NLSP. |
1.3.6.1.4.1.18.3.5.5.128.7 | wfNlspNeighTable | 1 | 15 | wfNlspNeightable |
1.3.6.1.4.1.18.3.5.5.128.8 | wfNlspTranslationTable | 1 | 5 | Translation Group The translation group contains tables providing mappings between network numbers, NLSP system IDs, and router n… |
1.3.6.1.4.1.18.3.5.5.128.9 | wfNlspIDMapTable | 1 | 5 | NLSP ID Mapping Table This table maps NLSP system IDs to router names and IPX network numbers. |
1.3.6.1.4.1.18.3.5.5.128.10 | wfNlspNetMapTable | 1 | 5 | IPX Network Number Mapping Table This table maps IPX network numbers to router names and NLSP IDs. |
1.3.6.1.4.1.18.3.5.5.128.11 | wfNlspNameMapTable | 1 | 5 | Name Mapping Table This table maps router names to their corresponding IPX network number and NLSP ID. |
1.3.6.1.4.1.18.3.5.5.128.12 | wfNlspNodeTable | 1 | 11 | Node Table This table contains an entry for each node in the graph. By default, this table is empty. It is only created if reques… |
1.3.6.1.4.1.18.3.5.5.128.13 | wfNlspLinkTable | 1 | 11 | Link Table This table contains an entry for all of the links in. the graph. By default, this table is empty. It is only created… |
1.3.6.1.4.1.18.3.5.5.128.14 | wfNlspPathTable | 1 | 4 | wfNlspPathtable |
1.3.6.1.4.1.18.3.5.5.128.15 | wfNlspGraphXRouteTable | 1 | 7 | Graph XRoutes Table This table contains information about of all the XRoutes provided by a node in the graph. By default, this ta… |
1.3.6.1.4.1.18.3.5.5.128.16 | wfNlspGraphServTable | 1 | 9 | Graph Services Table This table contains information about all the services provided by a node in the graph. By default, this tab… |
1.3.6.1.4.1.18.3.5.5.128.17 | wfNlspLspTable | 1 | 9 | LSP Header Table The LSP Header table contains information about each LSP in the database as well as an OCTET STRING containing th… |
1.3.6.1.4.1.18.3.5.5.128.18 | wfNlspLspOptTable | 1 | 7 | NLSP Options Table The LSP options table is used to obtain each option contained in an LSP. By default this table is empty. It w… |
1.3.6.1.4.1.18.3.5.5.128.19 | wfNlspCreateDestTblTable | 1 | 8 | NLSP Create Destination Table By default the NLSP Destination Table is not. created. This table is used to create only those NLSP… |
1.3.6.1.4.1.18.3.5.5.128.20 | wfNlspCreateNodeTblTable | 1 | 8 | NLSP Create Node Table By default the NLSP Node Table is not create. This table is used to create only those NLSP node information… |
1.3.6.1.4.1.18.3.5.5.128.21 | wfNlspCreateLinkTblTable | 1 | 10 | NLSP Create Link Table By default the NLSP Link Table is not create. This table is used to create only those NLSP link information… |
1.3.6.1.4.1.18.3.5.5.128.22 | wfNlspCreatePathTblTable | 1 | 10 | wfNlspCreatePathtblTable |
1.3.6.1.4.1.18.3.5.5.128.23 | wfNlspCreateXRouteTblTable | 1 | 10 | NLSP Create XRoute Table By default the NLSP XRoute Table is not create. This table is used to create only those NLSP XRoute infor… |
1.3.6.1.4.1.18.3.5.5.128.24 | wfNlspCreateServTblTable | 1 | 10 | NLSP Create Service Table By default the NLSP Service Table is not create. This table is used to create only those NLSP Service in… |
1.3.6.1.4.1.18.3.5.5.128.25 | wfNlspCreateLspTblTable | 1 | 8 | NLSP Create LSP Table By default the NLSP LSP Table is not create. This table is used to create only those NLSP LSP information ne… |
1.3.6.1.4.1.18.3.5.5.128.26 | wfNlspCreateLspOptTblTable | 1 | 8 | NLSP Create LSP Options Table By default the NLSP LSP Options Table is not create. This table is used to create only those NLSP LS… |
1.3.6.1.4.1.18.3.5.5.128.27 | wfNlspCreateNeighTblTable | 1 | 8 | wfNlspCreateNeightblTable |
1.3.6.1.4.1.18.3.5.5.128.28 | wfNlspCreateTransMapTblTable | 1 | 5 | NLSP Create Translation Map Table By default the NLSP Translation Map Table is not create. This table is used to create only thos… |
1.3.6.1.4.1.18.3.5.5.128.29 | wfNlspCreateNodeIDMapTblTable | 1 | 10 | NLSP Create Node ID Map Table By default the NLSP Mode ID Map Table is not create. This table is used to create only those NLSP No… |
1.3.6.1.4.1.18.3.5.5.128.30 | wfNlspCreateNetMapTblTable | 1 | 10 | NLSP Create Network Map Table By default the NLSP Network Map Table is not created. This table is used to create only those NLSP N… |