Enable/Disable SMDS_SW billing.
Parsed from file swsmds.mib.txt
Company: None
Module: Wellfleet-SWSMDS-MIB
Enable/Disable SMDS_SW billing.
Parsed from file Wellfleet-SWSMDS-MIB.mib
Module: Wellfleet-SWSMDS-MIB
Vendor: Wellfleet
Module: Wellfleet-SWSMDS-MIB
[Automatically extracted from oidview.com]
wfSmdsSwUsageEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable SMDS_SW billing." DEFVAL { enabled } ::= { wfSmdsSwUsage 1 }
wfSmdsSwUsageEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable SMDS_SW billing." DEFVAL { enabled } ::= { wfSmdsSwUsage 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.7.9.1.0 | wfSmdsSwUsageEnable | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.7.9.2 | wfSmdsSwUsageVolume | 1 | 1 | Indicates the file system volume number to which the billing usage data files will be written. The volume number corresponds to … |
| 1.3.6.1.4.1.18.3.5.9.7.9.3 | wfSmdsSwUsageVolumeBackup | 1 | 1 | Indicates the backup volume if wfSmdsSwUsageVolume becomes inoperative. Note: This feature is not implemented in this release. |
| 1.3.6.1.4.1.18.3.5.9.7.9.4 | wfSmdsSwUsageDirectory | 1 | 1 | The name of the directory where the billing usage data files are stored. |
| 1.3.6.1.4.1.18.3.5.9.7.9.5 | wfSmdsSwUsageFilePrefix | 1 | 1 | The base name of billing usage data files. |
| 1.3.6.1.4.1.18.3.5.9.7.9.6 | wfSmdsSwUsageTimerInterval | 1 | 1 | This number determines the timer interval (number of seconds) unit for the Billing process to perform its various timer driven ta… |
| 1.3.6.1.4.1.18.3.5.9.7.9.7 | wfSmdsSwUsageUpdateInterval | 1 | 1 | This number specifies the interval (number of minutes) for the Billing process to collect and update billing usage data in the wf… |
| 1.3.6.1.4.1.18.3.5.9.7.9.8 | wfSmdsSwUsageStoreInterval | 1 | 1 | This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system … |
| 1.3.6.1.4.1.18.3.5.9.7.9.9 | wfSmdsSwUsageFlushInterval | 1 | 1 | This number specifies the interval (number of minutes) for the Billing process to write billing usage data on to the file system … |
| 1.3.6.1.4.1.18.3.5.9.7.9.10 | wfSmdsSwUsageCleanupInterval | 1 | 1 | This is the interval (number of minutes) for the Billing process to check and delete old billing usage data files. Note: When con… |
| 1.3.6.1.4.1.18.3.5.9.7.9.11 | wfSmdsSwUsageLocalTimeZone | 1 | 1 | Indicates local time zone of the switch |
| 1.3.6.1.4.1.18.3.5.9.7.9.12 | wfSmdsSwUsageUpdateTimeStamp | 1 | 1 | Time stamp of last wfSmdsSwUsageUpdateInterval timer expiration or the starting time of the current wfSmdsSwUsageUpdateInterval. … |
| 1.3.6.1.4.1.18.3.5.9.7.9.13 | wfSmdsSwUsageStoreTimeStamp | 1 | 1 | Time stamp of last wfSmdsSwUsageStoreInterval timer expiration or the starting time of the current wfSmdsSwUsageStoreInterval. T… |
| 1.3.6.1.4.1.18.3.5.9.7.9.14 | wfSmdsSwUsageFlushTimeStamp | 1 | 1 | wfSmdsSwUsageFlushtimeStamp |
| 1.3.6.1.4.1.18.3.5.9.7.9.15 | wfSmdsSwUsageCleanupTimeStamp | 1 | 1 | Time stamp of last wfSmdsSwUsageCleanupInterval timer expiration or the starting time of the current wfSmdsSwUsageCleanupInterval… |
| 1.3.6.1.4.1.18.3.5.9.7.9.16 | wfSmdsSwUsageUpdateData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating of the billing usage data. Once activated, this attri… |
| 1.3.6.1.4.1.18.3.5.9.7.9.17 | wfSmdsSwUsageStoreData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data. Once activated… |
| 1.3.6.1.4.1.18.3.5.9.7.9.18 | wfSmdsSwUsageFlushData | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate updating and writing of the billing usage data and followed by… |
| 1.3.6.1.4.1.18.3.5.9.7.9.19 | wfSmdsSwUsageFileCleanup | 1 | 1 | Setting this attribute to a non-zero value will cause an immediate checking and deleting old billing usage data files. Once activ… |
| 1.3.6.1.4.1.18.3.5.9.7.9.20 | wfSmdsSwUsageState | 1 | 1 | current state of SMDS_SW billing. |
| 1.3.6.1.4.1.18.3.5.9.7.9.21 | wfSmdsSwUsageCurVolume | 1 | 1 | current file system volume number used. This number is the same as wfSmdsSwUsageVolume except when the user sets wfSmdsSwUsageVol… |
| 1.3.6.1.4.1.18.3.5.9.7.9.22 | wfSmdsSwUsageCurVolumeBackup | 1 | 1 | curent backup file system volume number used. This number is the same as wfSmdsSwUsageVolumeBackUp except when the user sets wfSm… |
| 1.3.6.1.4.1.18.3.5.9.7.9.23 | wfSmdsSwUsageCurDirectory | 1 | 1 | current directory name used. This number is the same as wfSmdsSwUsageDirectory except when the user sets wfSmdsSwUsageDirectory t… |
| 1.3.6.1.4.1.18.3.5.9.7.9.24 | wfSmdsSwUsageCurFilePrefix | 1 | 1 | current base file name used. This number is the same as wfSmdsSwUsageFilePrefix except when the user sets wfSmdsSwUsageFilePrefix… |
| 1.3.6.1.4.1.18.3.5.9.7.9.25 | wfSmdsSwUsageCurTimerInterval | 1 | 1 | current timer interval number used. This number is the same as wfSmdsSwUsageTimerInterval except when the user sets wfSmdsSwUsage… |
| 1.3.6.1.4.1.18.3.5.9.7.9.26 | wfSmdsSwUsageCurUpdateInterval | 1 | 1 | current update interval number used. This number is the same as wfSmdsSwUsageUpdateInterval except when the user sets wfSmdsSwUsa… |
| 1.3.6.1.4.1.18.3.5.9.7.9.27 | wfSmdsSwUsageCurStoreInterval | 1 | 1 | current store timer interval number used. This number is the same as wfSmdsSwUsageStoreInterval except when the user sets wfSmdsS… |
| 1.3.6.1.4.1.18.3.5.9.7.9.28 | wfSmdsSwUsageCurFlushInterval | 1 | 1 | current flush timer interval number used. This number is the same as wfSmdsSwUsageFlushInterval except when the user sets wfSmdsS… |
| 1.3.6.1.4.1.18.3.5.9.7.9.29 | wfSmdsSwUsageCurCleanupInterval | 1 | 1 | current file cleanup timer interval number used. This number is the same as wfSmdsSwUsageCleanupInterval except when the user set… |
| 1.3.6.1.4.1.18.3.5.9.7.9.30 | wfSmdsSwUsageDebug | 1 | 1 | Enable/Disable printing of debug edl (trap) messages. NOTE: Do not enable this attribute in operational enviornment as it will li… |
| 1.3.6.1.4.1.18.3.5.9.7.9.31 | wfSmdsSwUsageCurDebug | 1 | 1 | current debug value used. This value is the same as wfSmdsSwUsageDebug except when the user sets wfSmdsSwUsageDeubg to an invalid… |
| 1.3.6.1.4.1.18.3.5.9.7.9.32 | wfSmdsSwUsageSwitchId | 1 | 1 | switch id used in the billing usage data file. |
| 1.3.6.1.4.1.18.3.5.9.7.9.33 | wfSmdsSwUsageNumEntries | 1 | 1 | number of entries in wfSmdsSwUsageTable |