{1 3 6 1 4 1 181 2 2 11 16}
Descriptions may differ between sources. The primary description is shown first.
Source file: Download DATASMART-MIB.mib
Publisher path: Mibs; 208,900 bytes
Source file: Download datasmart_14304.mib.txt
File: adc_kentrox/datasmart_14304.mib.txt; 208,900 bytes
Configures the DDS interface. Sets it to either 56K with no secondary channel, or 64K with Clear Channel service. The Possible values are: VALUE DESCRIPTION scDds56K(1) Set unit to 56K Operation scDds64K(2) Set unit to 64K Operation
Status in source: mandatory.
Names: dsNcDdsType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dsNcDdsType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"scDds56K",
"(",
"1",
")",
",",
"scDds64K",
"(",
"2",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Configures the DDS interface. Sets it to either 56K with no secondary channel, or 64K with Clear Channel service. The Possible values are: VALUE DESCRIPTION scDds56K(1) Set unit to 56K Operation scDds64K(2) Set unit to 64K Operation\"",
"::=",
"{",
"dsNc",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"scDds56K",
1
],
[
"scDds64K",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Configures the DDS interface. Sets it to either 56K with no secondary channel, or 64K with Clear Channel service. The Possible values are: VALUE DESCRIPTION scDds56K(1) Set unit to 56K Operation scDds64K(2) Set unit to 64K Operation"
],
null,
null,
null,
null
]
}Module: DATASMART-MIB
dsNcDdsType OBJECT-TYPE
SYNTAX INTEGER {
scDds56K (1),
scDds64K (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures the DDS interface. Sets it to either
56K with no secondary channel, or 64K with Clear
Channel service.
The Possible values are:
VALUE DESCRIPTION
scDds56K(1) Set unit to 56K Operation
scDds64K(2) Set unit to 64K Operation"
::= { dsNc 16 }{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Gauge', 'IpAddress', 'Counter', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'ifIndex', 'ifDescr'], 'RFC1406-MIB': ['dsx1LineStatus', 'dsx1CurrentESs', 'dsx1CurrentUASs']}Archived: 2026-10-19T00:22:07.158424+00:00.
dsNcDdsType OBJECT-TYPE
SYNTAX INTEGER {
scDds56K (1),
scDds64K (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The Possible values are:
VALUE DESCRIPTION
scDds56K(1) Set unit to 56K Operation
scDds64K(2) Set unit to 56K Operation"
::= { dsNc 16 }
dsNcDdsType OBJECT-TYPE
SYNTAX INTEGER {
scDds56K (1),
scDds64K (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
The Possible values are:
VALUE DESCRIPTION
scDds56K(1) Set unit to 56K Operation
scDds64K(2) Set unit to 56K Operation"
::= { dsNc 16 }
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.2.2.11.16.0 | dsNcDdsType | 0 | 0 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.2.2.11.1 | dsNcFraming | 1 | 1 | The type of framing being used on the Network Interface. The possible values are: VALUE DESCRIPTION ncSF(1) … |
| 1.3.6.1.4.1.181.2.2.11.2 | dsNcCoding | 1 | 1 | The type of line coding being used on the Network Interface. The possible values are: VALUE DESCRIPTION ncAmi(1) … |
| 1.3.6.1.4.1.181.2.2.11.3 | dsNcT1403 | 1 | 1 | This object enables/disables the sending of T1.403 PRM messages. The possible values are: VALUE DESCRIPTION ncT1403En… |
| 1.3.6.1.4.1.181.2.2.11.4 | dsNcYellow | 1 | 1 | This object enables/disables sending Yellow alarm out the Network Interface upon receipt of an alarm on the Network Interface. Th… |
| 1.3.6.1.4.1.181.2.2.11.5 | dsNcAddr54 | 1 | 1 | If 54016 addressing is enabled, this object determines what type of addressing the unit responds to. The possible values are: VALU… |
| 1.3.6.1.4.1.181.2.2.11.6 | dsNc54016 | 1 | 1 | This object determines whether the unit responds to 54016 addressing modes. The possible values are: VALUE DESCRIPTI… |
| 1.3.6.1.4.1.181.2.2.11.7 | dsNcLbo | 1 | 1 | The Network Interface Line Build Out setting. The possible values are: VALUE DESCRIPTION ncLbo0(1) 0.0dB line … |
| 1.3.6.1.4.1.181.2.2.11.8 | dsNcMF16 | 1 | 1 | The E1 network interface Time Slot 16 MultiFrame alignment signal setting. The possible values are: VALUE DESCRIPTION … |
| 1.3.6.1.4.1.181.2.2.11.9 | dsNcCRC | 1 | 1 | The E1 network interface CRC generation/checking setting. The possible values are: VALUE DESCRIPTION ncCrcEnable(1) … |
| 1.3.6.1.4.1.181.2.2.11.10 | dsNcFasAlign | 1 | 1 | The E1 network interface Time Slot 0 NOT-FAS Word setting. The possible values are: VALUE DESCRIPTION ncFasWord(1) … |
| 1.3.6.1.4.1.181.2.2.11.11 | dsNcE1DLPath | 1 | 1 | The E1 network interface Sa bit usage. If Sa bits are being used for data link communications, both the near and far end units mu… |
| 1.3.6.1.4.1.181.2.2.11.12 | dsNcKA | 1 | 1 | The status of sending E1 remote Frame Alarm into the NI during alarms. The Possible values are: VALUE DESCRIPTION nc… |
| 1.3.6.1.4.1.181.2.2.11.13 | dsNcGenRfa | 1 | 1 | The status of sending E1 remote Frame Alarm into the NI during alarms. The Possible values are: VALUE DESCRIPTION ncG… |
| 1.3.6.1.4.1.181.2.2.11.14 | dsNcPassTiRfa | 1 | 1 | The status of sending the RFA received on the network interface out the terminal interface. This function is not possible on a DS… |
| 1.3.6.1.4.1.181.2.2.11.15 | dsNcIdle | 1 | 1 | The idle code to be transmited in the idle NI and TI channels. This code is also sent in all TI channels when the TI is experienc… |
| 1.3.6.1.4.1.181.2.2.11.17 | dsNcTs16 | 1 | 1 | Configures the value of Time Slot 16 in an E1 unit. Support for older commands is supported but has been combined into one easie… |