Used to control the image download to the flash banks.
NOTE: Read on this attribute returns the last t/ftp command,
without login/password.
For s/w release 4.0 and above, the value read back
includes the Kilo-Bytes downloaded for last download
command.
It is the size of file downloaded (in KB), if the
download has completed. If a download is in progress
this value would correspond to Kilo-Bytes successfully
downloaded so far.
For set the string syntax is one of the following
a. abort
- Aborts the current download
b. ftp:
- Download image using ftp
c. tftp:
- Download image using tftp
where
(default - no passwd - passwd is empty string)
(default - skip cd command )
to the flash - NO DEFAULTS - because the
filename is used as distinguishing versions
there are no defaults for this command.
For TFTP Path information is part of the filename
NOTE: Burn to active bank fails
passive - if `passive` is specified, ftp is done using
passive mode (provided for FTP download across
firewall).
NOTE: None of the fields should contain ':' within them, as
it is used as field separator.
Parsed from file ONS15501-MIB.mib
Module: ONS15501-MIB
Used to control the image download to the flash banks.
NOTE: Read on this attribute returns the last t/ftp command,
without login/password.
For s/w release 4.0 and above, the value read back
includes the Kilo-Bytes downloaded for last download
command.
It is the size of file downloaded (in KB), if the
download has completed. If a download is in progress
this value would correspond to Kilo-Bytes successfully
downloaded so far.
For set the string syntax is one of the following
a. abort
- Aborts the current download
b. ftp:
- Download image using ftp
c. tftp:
- Download image using tftp
where
(default - no passwd - passwd is empty string)
(default - skip cd command )
to the flash - NO DEFAULTS - because the
filename is used as distinguishing versions
there are no defaults for this command.
For TFTP Path information is part of the filename
NOTE: Burn to active bank fails
passive - if `passive` is specified, ftp is done using
passive mode (provided for FTP download across
firewall).
NOTE: None of the fields should contain ':' within them, as
it is used as field separator.
Used to control the image download to the flash banks.
NOTE: Read on this attribute returns the last t/ftp command,
without login/password.
For s/w release 4.0 and above, the value read back
includes the Kilo-Bytes downloaded for last download
command.
It is the size of file downloaded (in KB), if the
download has completed. If a download is in progress
this value would correspond to Kilo-Bytes successfully
downloaded so far.
For set the string syntax is one of the following
a. abort
- Aborts the current download
b. ftp:
- Download image using ftp
c. tftp:
- Download image using tftp
where
(default - no passwd - passwd is empty string)
(default - skip cd command )
to the flash - NO DEFAULTS - because the
filename is used as distinguishing versions
there are no defaults for this command.
For TFTP Path information is part of the filename
NOTE: Burn to active bank fails
passive - if `passive` is specified, ftp is done using
passive mode (provided for FTP download across
firewall).
NOTE: None of the fields should contain ':' within them, as
it is used as field separator.
Parsed from file ONS15501-MIB.my.txt
Company: None
Module: ONS15501-MIB
Used to control the image download to the flash banks.
NOTE: Read on this attribute returns the last t/ftp command,
without login/password.
For s/w release 4.0 and above, the value read back
includes the Kilo-Bytes downloaded for last download
command.
It is the size of file downloaded (in KB), if the
download has completed. If a download is in progress
this value would correspond to Kilo-Bytes successfully
downloaded so far.
For set the string syntax is one of the following
a. abort
- Aborts the current download
b. ftp:
- Download image using ftp
c. tftp:
- Download image using tftp
where
(default - no passwd - passwd is empty string)
(default - skip cd command )
to the flash - NO DEFAULTS - because the
filename is used as distinguishing versions
there are no defaults for this command.
For TFTP Path information is part of the filename
NOTE: Burn to active bank fails
passive - if `passive` is specified, ftp is done using
passive mode (provided for FTP download across
firewall).
NOTE: None of the fields should contain ':' within them, as
it is used as field separator.
ons15501SysSwDownload OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control the image download to the flash banks. NOTE: Read on this attribute returns the last t/ftp command, without login/password. For s/w release 4.0 and above, the value read back includes the Kilo-Bytes downloaded for last download command. It is the size of file downloaded (in KB), if the download has completed. If a download is in progress this value would correspond to Kilo-Bytes successfully downloaded so far. For set the string syntax is one of the following a. abort - Aborts the current download b. ftp:
: : : : : [:passive] - Download image using ftp c. tftp: : : - Download image using tftp where - is t/ftp server name - is login to be used for ftp (default anonymous) - password for the login name for ftp (default - no passwd - passwd is empty string) - path to be given on ftp prompt for cd (default - skip cd command ) - name of the file to be downloaded and burnt to the flash - NO DEFAULTS - because the filename is used as distinguishing versions there are no defaults for this command. For TFTP Path information is part of the filename - which flash has to be burnt [1|2|3] NOTE: Burn to active bank fails passive - if `passive` is specified, ftp is done using passive mode (provided for FTP download across firewall). NOTE: None of the fields should contain ':' within them, as it is used as field separator." ::= { ons15501Sys 4 }
ons15501SysSwDownload OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Used to control the image download to the flash banks. NOTE: Read on this attribute returns the last t/ftp command, without login/password. For s/w release 4.0 and above, the value read back includes the Kilo-Bytes downloaded for last download command. It is the size of file downloaded (in KB), if the download has completed. If a download is in progress this value would correspond to Kilo-Bytes successfully downloaded so far. For set the string syntax is one of the following a. abort - Aborts the current download b. ftp:
: : : : : [:passive] - Download image using ftp c. tftp: : : - Download image using tftp where - is t/ftp server name - is login to be used for ftp (default anonymous) - password for the login name for ftp (default - no passwd - passwd is empty string) - path to be given on ftp prompt for cd (default - skip cd command ) - name of the file to be downloaded and burnt to the flash - NO DEFAULTS - because the filename is used as distinguishing versions there are no defaults for this command. For TFTP Path information is part of the filename - which flash has to be burnt [1|2|3] NOTE: Burn to active bank fails passive - if `passive` is specified, ftp is done using passive mode (provided for FTP download across firewall). NOTE: None of the fields should contain ':' within them, as it is used as field separator." ::= { ons15501Sys 4 }
Vendor: Optical Transmission Labs, Inc.
Module: ONS15501-MIB
[Automatically extracted from oidview.com]
ons15501SysSwDownload OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control the image download to the flash banks. NOTE: Read on this attribute returns the last t/ftp command, without login/password. For s/w release 4.0 and above, the value read back includes the Kilo-Bytes downloaded for last download command. It is the size of file downloaded (in KB), if the download has completed. If a download is in progress this value would correspond to Kilo-Bytes successfully downloaded so far. For set the string syntax is one of the following a. abort - Aborts the current download b. ftp:
: : : : : [:passive] - Download image using ftp c. tftp: : : - Download image using tftp where - is t/ftp server name - is login to be used for ftp (default anonymous) - password for the login name for ftp (default - no passwd - passwd is empty string) - path to be given on ftp prompt for cd (default - skip cd command ) - name of the file to be downloaded and burnt to the flash - NO DEFAULTS - because the filename is used as distinguishing versions there are no defaults for this command. For TFTP Path information is part of the filename - which flash has to be burnt [1|2|3] NOTE: Burn to active bank fails passive - if `passive` is specified, ftp is done using passive mode (provided for FTP download across firewall). NOTE: None of the fields should contain ':' within them, as it is used as field separator." ::= { ons15501Sys 4 }
ons15501SysSwDownload OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Used to control the image download to the flash banks. NOTE: Read on this attribute returns the last t/ftp command, without login/password. For s/w release 4.0 and above, the value read back includes the Kilo-Bytes downloaded for last download command. It is the size of file downloaded (in KB), if the download has completed. If a download is in progress this value would correspond to Kilo-Bytes successfully downloaded so far. For set the string syntax is one of the following a. abort - Aborts the current download b. ftp:
: : : : : [:passive] - Download image using ftp c. tftp: : : - Download image using tftp where - is t/ftp server name - is login to be used for ftp (default anonymous) - password for the login name for ftp (default - no passwd - passwd is empty string) - path to be given on ftp prompt for cd (default - skip cd command ) - name of the file to be downloaded and burnt to the flash - NO DEFAULTS - because the filename is used as distinguishing versions there are no defaults for this command. For TFTP Path information is part of the filename - which flash has to be burnt [1|2|3] NOTE: Burn to active bank fails passive - if `passive` is specified, ftp is done using passive mode (provided for FTP download across firewall). NOTE: None of the fields should contain ':' within them, as it is used as field separator." ::= { ons15501Sys 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1869.11.11.1.4.0 | ons15501SysSwDownload | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1869.11.11.1.1 | ons15501SysDevFlash1Image | 1 | 1 | Gives the name of the software programmed on flash bank one. |
1.3.6.1.4.1.1869.11.11.1.2 | ons15501SysDevFlash2Image | 1 | 1 | Gives the name of the software programmed on flash bank two. |
1.3.6.1.4.1.1869.11.11.1.3 | ons15501SysDevFlash3Image | 1 | 1 | Gives the name of the software programmed on flash bank three. |
1.3.6.1.4.1.1869.11.11.1.5 | ons15501SysDevActiveImage | 1 | 1 | Show currently active image's bank number. This may be different from ons15501SysConfiguredActiveImage, if a. The image on ons1550… |
1.3.6.1.4.1.1869.11.11.1.6 | ons15501SysDeviceManagerList | 1 | 1 | A ',' separated list of managers that will receive the Traps. If a specific host should receive the traps sent from this unit, it … |
1.3.6.1.4.1.1869.11.11.1.7 | ons15501SysSwDownloadStatus | 1 | 1 | Denotes the FTP/TFTP status. Please refer to the description of Ons15501ImageDnLoadStatus for a list of supported values |
1.3.6.1.4.1.1869.11.11.1.8 | ons15501SysConfiguredImage | 1 | 1 | Set/Show configured value for flash-bank number to be used on reboot. A set on this attribute will result in a reboot of the syst… |
1.3.6.1.4.1.1869.11.11.1.9 | ons15501CLEICode | 1 | 1 | This attribute represents the CLEI (Common Language Equipment Identifier) code for the ONS15501. |
1.3.6.1.4.1.1869.11.11.1.10 | ons15501PrimaryNTP | 1 | 1 | The IP address for the primary NTP server. |
1.3.6.1.4.1.1869.11.11.1.11 | ons15501SecondaryNTP | 1 | 1 | The IP address for the secondary NTP server. |
1.3.6.1.4.1.1869.11.11.1.12 | ons15501NTPAdminStatus | 1 | 1 | The configured administrative status for NTP. |
1.3.6.1.4.1.1869.11.11.1.13 | ons15501NTPOperationalStatus | 1 | 1 | The operational status for NTP. |
1.3.6.1.4.1.1869.11.11.1.14 | ons15501ActiveSoftwareVer | 1 | 1 | This attribute provides the active software version. This will be same as the entPhysicalSoftwareRev for the entry corresponding … |
1.3.6.1.4.1.1869.11.11.1.15 | ons15501LastConfigChangeTime | 1 | 1 | The value of sysUpTime when last configuration change was done. NMS may use this information to synchronize if some configuration … |
1.3.6.1.4.1.1869.11.11.1.16 | ons15501InRemoteInfoUpdateTime | 1 | 1 | This attribute gives the time-stamp when one or more of ons15501InRemoteChassisName, ons15501InRemotePortName, or ons15501InRemot… |
1.3.6.1.4.1.1869.11.11.1.17 | ons15501InRemoteChassisName | 1 | 1 | Manager initialized string value to identify the chassis associated with remote connection for optical input. ons15501InRemoteChas… |
1.3.6.1.4.1.1869.11.11.1.18 | ons15501InRemotePortName | 1 | 1 | Manager initialized string value to identify the the port (on remote chassis) associated with remote connection for optical input… |
1.3.6.1.4.1.1869.11.11.1.19 | ons15501InRemoteAgentIpAddr | 1 | 1 | Manager initialized string value to identify the network address to be used to reach the SNMP agent entity containing information… |
1.3.6.1.4.1.1869.11.11.1.20 | ons15501OutRemoteInfoUpdateTime | 1 | 1 | This attribute gives the time-stamp when one or more of ons15501OutRemoteChassisName, ons15501OutRemotePortName, or ons15501OutRe… |
1.3.6.1.4.1.1869.11.11.1.21 | ons15501OutRemoteChassisName | 1 | 1 | Manager initialized string value to identify the chassis associated with remote connection for optical output. ons15501OutRemoteCh… |
1.3.6.1.4.1.1869.11.11.1.22 | ons15501OutRemotePortName | 1 | 1 | Manager initialized string value to identify the the port (on remote chassis) associated with remote connection for optical outpu… |
1.3.6.1.4.1.1869.11.11.1.23 | ons15501OutRemoteAgentIpAddr | 1 | 1 | Manager initialized string value to identify the network address to be used to reach the SNMP agent entity containing information… |
1.3.6.1.4.1.1869.11.11.1.24 | ons15501SysAlarmStatus | 1 | 1 | Provides the highest severity alarm currently active. |
1.3.6.1.4.1.1869.11.11.1.25 | ons15501SysDateAndTime | 1 | 1 | The date and time of the System. The write will not succeed if the administrative state for NTP (ons15501NTPAdminStatus) is 'enabl… |