The current total entry number of VLANs are configured.
Parsed from file sn_switch_group.mib.txt
Company: None
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
The current total entry number of VLANs are configured.
Parsed from file FOUNDRY-SN-SWITCH-GROUP-MIB.mib
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
Vendor: Foundry Networks, Inc.
Module: FOUNDRY-SN-SWITCH-GROUP-MIB
[Automatically extracted from oidview.com]
snVLanGroupVlanCurEntry OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current total entry number of VLANs are configured." ::= { snSwInfo 6 }
snVLanGroupVlanCurEntry OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current total entry number of VLANs are configured." ::= { snSwInfo 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.1.6.0 | snVLanGroupVlanCurEntry | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.1.1 | snSwGroupOperMode | 1 | 1 | noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represe… |
| 1.3.6.1.4.1.1991.1.1.3.1.2 | snSwGroupIpL3SwMode | 1 | 1 | The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled… |
| 1.3.6.1.4.1.1991.1.1.3.1.3 | snSwGroupIpMcastMode | 1 | 1 | The Switch Group is configured with the IP Multicast pruning mode either enabled or disabled and the default is disabled mode. ena… |
| 1.3.6.1.4.1.1991.1.1.3.1.4 | snSwGroupDefaultCfgMode | 1 | 1 | The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will chan… |
| 1.3.6.1.4.1.1991.1.1.3.1.5 | snSwGroupSwitchAgeTime | 1 | 1 | The Switch Age time is 180sec by default. The configured range is 10 to 10,000sec. The time represents the time span to age out … |
| 1.3.6.1.4.1.1991.1.1.3.1.7 | snVLanGroupSetAllVLan | 1 | 1 | The value of this object is the VLanIndex of a particalur entry in snVLanByPortTable (snVLanByPortVLanIndex). All the attributes … |
| 1.3.6.1.4.1.1991.1.1.3.1.8 | snSwPortSetAll | 1 | 1 | The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortI… |
| 1.3.6.1.4.1.1991.1.1.3.1.9 | snFdbTableCurEntry | 1 | 1 | The current total entry number of FDB are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.10 | snFdbTableStationFlush | 1 | 1 | The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in … |
| 1.3.6.1.4.1.1991.1.1.3.1.11 | snPortStpSetAll | 1 | 1 | The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-… |
| 1.3.6.1.4.1.1991.1.1.3.1.12 | snSwProbePortNum | 1 | 1 | A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to… |
| 1.3.6.1.4.1.1991.1.1.3.1.13 | snSw8021qTagMode | 1 | 1 | The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabl… |
| 1.3.6.1.4.1.1991.1.1.3.1.14 | snSwGlobalStpMode | 1 | 1 | Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enable… |
| 1.3.6.1.4.1.1991.1.1.3.1.15 | snSwIpMcastQuerierMode | 1 | 1 | The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)........… |
| 1.3.6.1.4.1.1991.1.1.3.1.17 | snSwViolatorPortNumber | 1 | 1 | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The … |
| 1.3.6.1.4.1.1991.1.1.3.1.18 | snSwViolatorMacAddress | 1 | 1 | The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.19 | snVLanGroupVlanMaxEntry | 1 | 1 | The maximum number of VLAN entries are allowed to configure. |
| 1.3.6.1.4.1.1991.1.1.3.1.20 | snSwEosBufferSize | 1 | 1 | A specific buffer size for all the different EOS buffers. |
| 1.3.6.1.4.1.1991.1.1.3.1.21 | snVLanByPortEntrySize | 1 | 1 | The size of each VLAN table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.22 | snSwPortEntrySize | 1 | 1 | The size of each port table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.23 | snFdbStationEntrySize | 1 | 1 | The size of each Fdb station table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.24 | snPortStpEntrySize | 1 | 1 | The size of each port stp table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.25 | snSwEnableBridgeNewRootTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate bridge new root traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.26 | snSwEnableBridgeTopoChangeTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate bridge topology change traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.27 | snSwEnableLockedAddrViolationTrap | 1 | 1 | Indicates whether the SNMP agent process is permitted to generate locked address violation traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.28 | snSwIpxL3SwMode | 1 | 1 | The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enable… |
| 1.3.6.1.4.1.1991.1.1.3.1.29 | snVLanByIpSubnetMaxSubnets | 1 | 1 | The maximum number of subnets for each IP VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.30 | snVLanByIpxNetMaxNetworks | 1 | 1 | The maximum number of networks for each IPX VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.31 | snSwProtocolVLanMode | 1 | 1 | disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 V… |
| 1.3.6.1.4.1.1991.1.1.3.1.32 | snMacStationVLanId | 1 | 1 | This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table. (dot1dTpFdbTable). Since the d… |
| 1.3.6.1.4.1.1991.1.1.3.1.33 | snSwClearCounters | 1 | 1 | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the foll… |
| 1.3.6.1.4.1.1991.1.1.3.1.34 | snSw8021qTagType | 1 | 1 | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/… |
| 1.3.6.1.4.1.1991.1.1.3.1.35 | snSwBroadcastLimit | 1 | 1 | Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets p… |
| 1.3.6.1.4.1.1991.1.1.3.1.36 | snSwMaxMacFilterPerSystem | 1 | 1 | The maximum number of MAC Filters per system in the MAC Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.37 | snSwMaxMacFilterPerPort | 1 | 1 | The maximum number of MAC Filters per port in the Port MAC Access Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.38 | snSwDefaultVLanId | 1 | 1 | The VLAN ID of the DEFAULT PORT-VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.39 | snSwGlobalAutoNegotiate | 1 | 1 | This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotia… |
| 1.3.6.1.4.1.1991.1.1.3.1.40 | snSwQosMechanism | 1 | 1 | Indicates whether the qos mechanism is strict or weighted. |
| 1.3.6.1.4.1.1991.1.1.3.1.41 | snSwSingleStpMode | 1 | 1 | Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. enabl… |
| 1.3.6.1.4.1.1991.1.1.3.1.42 | snSwFastStpMode | 1 | 1 | Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(… |
| 1.3.6.1.4.1.1991.1.1.3.1.43 | snSwViolatorIfIndex | 1 | 1 | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.44 | snSwSingleStpVLanId | 1 | 1 | The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree was enabled. This object returns zero if Single Spanning Tre… |