Reference record for OID 1.3.6.1.4.1.2.3.51.1.4.9.3.1.5



parent
1.3.6.1.4.1.2.3.51.1.4.9.3.1 (snmpAgentConfig)
node code
5
node name
snmpSystemAgentEnable
dot oid
1.3.6.1.4.1.2.3.51.1.4.9.3.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmRemoteSupSnmpMIB(1) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpSystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmRemoteSupSnmpMIB(1) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpSystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmRemoteSupSnmpMIB(1) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpSystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmRemoteSupSnmpMIB(1) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpSystemAgentEnable(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmRemoteSupSnmpMIB(1) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpSystemAgentEnable(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmRemoteSupSnmpMIB(1) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpSystemAgentEnable(5)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmRemoteSupSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpSystemAgentEnable
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmRemoteSupSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpSystemAgentEnable
  • /iso/org/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmRemoteSupSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpSystemAgentEnable
  • /iso/org/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmRemoteSupSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpSystemAgentEnable
  • /iso/iso-identified-organization/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmRemoteSupSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpSystemAgentEnable
  • /iso/iso-identified-organization/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmRemoteSupSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpSystemAgentEnable
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/2/3/51/1/4/9/3/1/5

    Description by mibdepot

    Disable or enable the SNMP agent.

    Note: To alter any of the configuration settings for the SNMP Agent
    the following procedure should be used:
    (1)This object should be written with 'disabled'
    (2)Make the modifications to other settings
    (3)This object should be written with 'enabled'
    (4)Restart the remote supervisor adapter

    Also note that when this object has a value of enabled
    that the following is verifed, if this verification fails a error
    response will be returned for the set of this object and the SNMP
    agent will be left in a disabled state.
    (1)Is there a valid system contact
    (2)Is there a valid system name
    (3)Is there at least one valid community name and for that
    community name is there one valid IP address or hostname

    Parsed from file RTRSAAG.MIB.txt
    Company: ibm
    Module: RSA-MIB

    Information by oid_info

    Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

    Information by mibdepot

    snmpSystemAgentEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Disable or enable the SNMP agent. Note: To alter any of the configuration settings for the SNMP Agent the following procedure should be used: (1)This object should be written with 'disabled' (2)Make the modifications to other settings (3)This object should be written with 'enabled' (4)Restart the remote supervisor adapter Also note that when this object has a value of enabled that the following is verifed, if this verification fails a error response will be returned for the set of this object and the SNMP agent will be left in a disabled state. (1)Is there a valid system contact (2)Is there a valid system name (3)Is there at least one valid community name and for that community name is there one valid IP address or hostname " ::= { snmpAgentConfig 5 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.2)

    Bob Moore

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.2.3.51.1.4.9.3.1.5.0 snmpSystemAgentEnable 0 0 None

    Brothers (4)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.2.3.51.1.4.9.3.1.1 snmpSystemContact 1 1 A NULL terminated 48 byte string that contains the
    SNMP agent contact name. Note: Set snmpSystemAgentEnable
    to disabled before pe…
    1.3.6.1.4.1.2.3.51.1.4.9.3.1.2 snmpSystemLocation 1 1 A NULL terminated 48 byte string that contains the
    SNMP agent location name. Note: Set snmpSystemAgentEnable
    to disabled before p…
    1.3.6.1.4.1.2.3.51.1.4.9.3.1.3 snmpSystemAgentTrapsDisable 1 1 Disable or enable SNMP traps. Note: Set snmpSystemAgentEnable
    to disabled before performing a set of this object.
    1.3.6.1.4.1.2.3.51.1.4.9.3.1.4 snmpAgentCommunityConfig 1 8 None