Signaling Vci. ATM Forum has defined VPI/VCI as VPI 0, VCI 5
for signaling.
Parsed from file swatm.mib.txt
Company: None
Module: SWITCH-ATM-MIB
Signaling Vci. ATM Forum has defined VPI/VCI as VPI 0, VCI 5
for signaling.
Parsed from file SWITCH-ATM-MIB.mib
Module: SWITCH-ATM-MIB
Vendor: Allied Telesis, Inc.
Module: SWITCH-ATM-MIB
[Automatically extracted from oidview.com]
atmxPortSignalingVci OBJECT-TYPE SYNTAX INTEGER (5..5) MAX-ACCESS read-only STATUS current DESCRIPTION "Signaling Vci. ATM Forum has defined VPI/VCI as VPI 0, VCI 5 for signaling." ::= { atmxPortEntry 10 }
atmxPortSignalingVci OBJECT-TYPE SYNTAX INTEGER (5..5) MAX-ACCESS read-only STATUS current DESCRIPTION "Signaling Vci. ATM Forum has defined VPI/VCI as VPI 0, VCI 5 for signaling." ::= { atmxPortEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.1 | atmxPortIndex | 0 | 0 | A unique value which identifies this atm submodule port. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.2 | atmxPortDescription | 0 | 0 | A description for this atm port. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.3 | atmxPortTransmissionType | 0 | 0 | The transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object wou… |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.4 | atmxPortMediaType | 0 | 0 | The type of media being used on this port. For example for a port using coaxial cable, the object would have the value 'coaxCabl… |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.5 | atmxPortOperStatus | 0 | 0 | The operational state (i.e., actual) of this port. The ILMI should not alarm on a physical interface when the value of this objec… |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.6 | atmxPortMaxVCCs | 0 | 0 | The maximum number of VCCs supported on this UNI. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.7 | atmxPortMaxVciBits | 0 | 0 | The number of active VCI bits on this interface. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.8 | atmxPortAddress | 0 | 0 | The ATM address assigned to this port. The value of this attribute is normally set via the ILMI. If the ILMI Address registration… |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.9 | atmxPortSignalingVersion | 0 | 0 | Version of the ATM forum UNI Signaling. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.11 | atmxPortILMIVci | 0 | 0 | ILMI Vci. ATM Forum has defined the VPI 0, VCI 16 for ILMI. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.12 | atmxPortEnableIlmi | 0 | 0 | ILMI Enable. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.13 | atmxPortEnableIlmiPoll | 0 | 0 | ILMI Poll Enable. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.14 | atmxPortEnablePlScramble | 0 | 0 | Payload Scrambling Enable. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.15 | atmxPortClock | 0 | 0 | ATM Port clock mode. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.16 | atmxPortMacAddress | 0 | 0 | ATM Port MAC Address. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.17 | atmxPortAdaptorRamSize | 0 | 0 | Segmentation and reassembly memory size in bytes. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.18 | atmxPortIlmiStatus | 0 | 0 | ILMI status. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.19 | atmxPortSignalingStatus | 0 | 0 | Signaling Status. |
1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.20 | atmxPortSignalingMode | 0 | 0 | If this has the value 'pvc' then signaling, ILMI and ILMI polling will be automatically disabled. |