Vendor: Compaq
Module: NETWORTH-FastEthernet-MDC100-MIB (Compaq-Mdc100.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
mdcModuleInfo OBJECT IDENTIFIER ::= { mdc100 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.215.1.1.7.2.1 | mdcThisAgent | 1 | 1 | The position of the MDC in this stack of units. Note that the top unit in the stack is unit #1 |
1.3.6.1.4.1.215.1.1.7.2.2 | mdcPreBootMajorVer | 1 | 1 | The major number of the Pre-Boot Flash Block version. For example, if the firmware version is 2.12, the value of this object wou… |
1.3.6.1.4.1.215.1.1.7.2.3 | mdcPreBootMinorVer | 1 | 1 | The minor number of the Pre-Boot Flash Block version. For example, if the firmware version is 2.12, the value of this object wou… |
1.3.6.1.4.1.215.1.1.7.2.4 | mdcBootMajorVer | 1 | 1 | The major number of the Boot Block Flash version. For example, if the firmware version is 2.12, the value of this object would b… |
1.3.6.1.4.1.215.1.1.7.2.5 | mdcBootMinorVer | 1 | 1 | The minor number of the Boot Flash Block version. For example, if the firmware version is 2.12, the value of this object would b… |
1.3.6.1.4.1.215.1.1.7.2.6 | mdcRuntimeMajorVer | 1 | 1 | The major number of the Runtime Flash Block version. For example, if the firmware version is 2.12, the value of this object woul… |
1.3.6.1.4.1.215.1.1.7.2.7 | mdcRuntimeMinorVer | 1 | 1 | The minor number of the Runtime Flash Block version. For example, if the firmware version is 2.12, the value of this object woul… |
1.3.6.1.4.1.215.1.1.7.2.8 | mdcBootWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the Boot block on the FLASH PROM chip. |
1.3.6.1.4.1.215.1.1.7.2.9 | mdcRuntimeWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the RunTime block on the FLASH PROM chi… |
1.3.6.1.4.1.215.1.1.7.2.10 | mdcWriteCommunity | 1 | 1 | The write community name for the Management Agent. If the value is not public, the write community name is not returned for get … |
1.3.6.1.4.1.215.1.1.7.2.11 | mdcWriteProtect | 1 | 1 | When set to ro(2), all supported MIB objects, with the exception of this object are made read only. This may be used in conjunct… |
1.3.6.1.4.1.215.1.1.7.2.12 | mdcIPFrameType | 1 | 1 | Except when booting up, a hub will communicate over IP using a single frame type defining the type of network that the IP traffi… |
1.3.6.1.4.1.215.1.1.7.2.13 | mdcIPXFrameType | 1 | 1 | The frame type over which IPX communication originating from the MDC100 will take place. The unit will respond to a packet using… |
1.3.6.1.4.1.215.1.1.7.2.14 | mdcIPXSAPBroadcast | 1 | 1 | The hub will generate SAP broadcasts over IPX. This allows the hub to be auto-discovered by Novell's NMS and is used to generat… |
1.3.6.1.4.1.215.1.1.7.2.15 | mdcIPAutoDiscoveryState | 1 | 1 | This object will allow a user to enable the unit to send out periodic ICMP Pings to ensure that the unit's IP Address is contain… |
1.3.6.1.4.1.215.1.1.7.2.16 | mdcPingPacketRate | 1 | 1 | This object will determine the rate (in seconds) at which ICMP Pings will be sent out by the unit to ensure that its IP Address … |
1.3.6.1.4.1.215.1.1.7.2.17 | mdcBootpRarpRetries | 1 | 1 | This object will allow the user to set the number of BOOTP/RARP retries that will be performed when the unit goes through its Bo… |
1.3.6.1.4.1.215.1.1.7.2.18 | mdcBootpRarpRetryInterval | 1 | 1 | This object will allow the user to set the time period (in seconds) after which a BOOTP/RARP attempt will time out and the unit … |
1.3.6.1.4.1.215.1.1.7.2.19 | mdcBootpRarpRequests | 1 | 1 | This object allows the user to enable/disable generation of BOOTP/RARP requests from the Hub in BOTH Boot and RunTime code. In B… |
1.3.6.1.4.1.215.1.1.7.2.20 | mdcVT100ScreenRefresh | 1 | 1 | This object will determine the rate, in seconds, at which the VT100 screen will refresh (i.e, update) the automatic fields (e.g.… |
1.3.6.1.4.1.215.1.1.7.2.21 | mdcRptrReset | 1 | 1 | Setting this object to reset(2) causes the unit to reset the management agent but retains the counter values. All non-durable in… |
1.3.6.1.4.1.215.1.1.7.2.22 | mdcModemInitString | 1 | 1 | This object provides a Modem Initialization String input which will be used to initialize a modem to the proper configuration. T… |
1.3.6.1.4.1.215.1.1.7.2.23 | mdcModemAutoNegotiateState | 1 | 1 | If enabled(1), then the MDC100 will adjust its speed to that specified when the modem answers the incoming connection. If the mo… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.215.1.1.7.1 | mdcStackInfo | 1 | 13 | None |
1.3.6.1.4.1.215.1.1.7.3 | mdcNetworkInfo | 7 | 14 | None |
1.3.6.1.4.1.215.1.1.7.4 | mdcIPTrapInfo | 1 | 5 | None |
1.3.6.1.4.1.215.1.1.7.5 | mdcIPXTrapInfo | 1 | 5 | None |
1.3.6.1.4.1.215.1.1.7.6 | mdcRedundantPortInfo | 1 | 8 | None |
1.3.6.1.4.1.215.1.1.7.7 | mdcSecurityInfo | 0 | 0 | None |
1.3.6.1.4.1.215.1.1.7.8 | mdcPortIntrusionInfo | 1 | 7 | None |
1.3.6.1.4.1.215.1.1.7.9 | mdcPortStatusInfo | 1 | 11 | None |
1.3.6.1.4.1.215.1.1.7.10 | mdcMemoryInfo | 14 | 28 | None |
1.3.6.1.4.1.215.1.1.7.11 | mdcTFTPDownloadInfo | 5 | 10 | None |
1.3.6.1.4.1.215.1.1.7.12 | mdcPortGroupStats | 1 | 21 | None |
1.3.6.1.4.1.215.1.1.7.13 | mdcSummaryGroupInfo | 2 | 10 | None |
1.3.6.1.4.1.215.1.1.7.14 | mdcPortStatsInfo | 1 | 6 | None |