Get: Read the state of the specified relay
(wrap on 'ring in' port on trunk). Wrap
may be set either by the manager or by
the Tmu due to some errors on the trunk.
Set: Only two values are allowed.
'no-wrap' indicates 'open the relay and attach
the trunk'
'wrap-set-by-manager' indicates 'detach
the trunk'
Parsed from file fibr_FR9230.mib.txt
Company: None
Module: TMU-MIB
Get: Read the state of the specified relay
(wrap on 'ring in' port on trunk). Wrap
may be set either by the manager or by
the Tmu due to some errors on the trunk.
Set: Only two values are allowed.
'no-wrap' indicates 'open the relay and attach
the trunk'
'wrap-set-by-manager' indicates 'detach
the trunk'
Parsed from file TMU-MIB.mib
Module: TMU-MIB
Vendor: Fibronics
Module: TMU-MIB
[Automatically extracted from oidview.com]
fibTmuWrapIn OBJECT-TYPE SYNTAX INTEGER { no-wrap(1), wrap-set-by-manager(2), wrap-set-by-Tmu(3), wrap-set-by-both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Get: Read the state of the specified relay (wrap on 'ring in' port on trunk). Wrap may be set either by the manager or by the Tmu due to some errors on the trunk. Set: Only two values are allowed. 'no-wrap' indicates 'open the relay and attach the trunk' 'wrap-set-by-manager' indicates 'detach the trunk' " ::= { tmuSystem 16 }
fibTmuWrapIn OBJECT-TYPE SYNTAX INTEGER { no-wrap(1), wrap-set-by-manager(2), wrap-set-by-Tmu(3), wrap-set-by-both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Get: Read the state of the specified relay (wrap on 'ring in' port on trunk). Wrap may be set either by the manager or by the Tmu due to some errors on the trunk. Set: Only two values are allowed. 'no-wrap' indicates 'open the relay and attach the trunk' 'wrap-set-by-manager' indicates 'detach the trunk' " ::= { tmuSystem 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.60.1.16.0 | fibTmuWrapIn | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.22.60.1.1 | fibTmuNumEventErrs | 1 | 1 | Cyclic counter. Indicates how many times the event_handler procedure has been called with the 'ERR' severity level or higher. |
1.3.6.1.4.1.22.60.1.2 | fibTmuArpAgeTime | 1 | 1 | The value of the system timer [in SYS_TICKs] at the last time ARP aging was carried out. |
1.3.6.1.4.1.22.60.1.3 | fibTmuNumRarpUpdate | 1 | 1 | Cyclic counter. Indicates how many times the system's IP address was updated because of a RARP message. |
1.3.6.1.4.1.22.60.1.4 | fibTmuMainSwVersion | 1 | 1 | United version for all software packages in this system. |
1.3.6.1.4.1.22.60.1.5 | fibTmuEepromVersion | 1 | 1 | Version of the eeprom package |
1.3.6.1.4.1.22.60.1.6 | fibTmuEepromDeffective | 1 | 1 | System information. Set when eeprom is found to be physically deffective and can not be read nor written to. |
1.3.6.1.4.1.22.60.1.7 | fibTmuLastSysIfIndex | 1 | 1 | Number of inteface via which the last ip message was received. Currently interfaces 1->3 are token ring interfaces and interface 4… |
1.3.6.1.4.1.22.60.1.8 | fibTmuTrDrvVersion | 1 | 1 | The software version of the token ring driver as received from the driver at initialization. |
1.3.6.1.4.1.22.60.1.9 | fibTmuSccDrvVersion | 1 | 1 | The software version of the serial line driver as received from the driver at initialization. |
1.3.6.1.4.1.22.60.1.10 | fibTmuSnmpUsrVersion | 1 | 1 | The software version of the sw package employing udp/ip/snmp and the preliminary reduction of messages from any of the interfaces… |
1.3.6.1.4.1.22.60.1.11 | fibTmuDisplayDebugMode | 1 | 1 | Flag indicating whether system is in a special debug mode. In that mode, extra code is executed to output indications on system st… |
1.3.6.1.4.1.22.60.1.12 | fibTmuEeFaultsFormat | 1 | 1 | Flag indicating whether faults stored in eeprom will each take a small eeprom space or a large eeprom space. If the 'small' option… |
1.3.6.1.4.1.22.60.1.13 | fibTmuRunFaultsFormat | 1 | 1 | This is the run time value of flag described in eeFaultsFormat above. |
1.3.6.1.4.1.22.60.1.14 | fibTmuFunctionalityVersion | 1 | 1 | The software version of the sw package which realizes the recovery process when the token ring fails (e.g. beaconing). Loaded at i… |
1.3.6.1.4.1.22.60.1.15 | fibTmuUtilitiesVersion | 1 | 1 | The software version of the sw package containing operating system and hw utilities. Loaded at initialization. |
1.3.6.1.4.1.22.60.1.17 | fibTmuWrapOut | 1 | 1 | Get: Read the state of the specified relay (wrap on 'ring Out' port on trunk). Wrap may be set either by the manager or by the Tmu… |
1.3.6.1.4.1.22.60.1.18 | fibTmuLoadEeDefaults | 1 | 1 | When this object is set, the Tmu system is instructed to load non volatile memory by default values at the next reset. Get: Read t… |
1.3.6.1.4.1.22.60.1.19 | fibTmuDontResetFatal | 1 | 1 | When this object is set, the Tmu system is instructed to reset the system when a fatal error has been detected. For debug purpose… |
1.3.6.1.4.1.22.60.1.20 | fibTmuRIConnection | 1 | 1 | GET: Read what kind of trank is connected to Ring In port. At board type 9232/nn has no value. |
1.3.6.1.4.1.22.60.1.21 | fibTmuROConnection | 1 | 1 | GET: Read what kind of trank is connected to Ring Out port. At board type 9232/nn has no value. |
1.3.6.1.4.1.22.60.1.22 | fibTmuRealTimeClock | 1 | 1 | Get: Read real time with format hh:mm:ss DDD dd/MMM/yy. Set: Recive Display string of format hh:mm:ss DDD dd/MMM/yy. |