The fault tolerant state of this adapter. Although
this value is valid for adapters that are not
part of a fault tolerant group, it only provides
additional information when the adapter participates in
a group.
The following values are valid:
unknown(1)
The fault tolerant state could not be determined. The
instrument agent may need to be upgraded.
active(2)
The adapter is actively participating in the network.
This state is displayed for adapters that are not part
of a fault tolerant group and for adapters in a fault
tolerant group that are not in the standby state.
standby(3)
The adapter is ready to assume network activity in case
of a failure of the active adapter.
failed(4)
The adapter has failed and cannot participate on the
network.
Parsed from file CPQNIC1.MIB.txt
Company: None
Module: CPQNIC-MIB
The fault tolerant state of this adapter. Although
this value is valid for adapters that are not
part of a fault tolerant group, it only provides
additional information when the adapter participates in
a group.
The following values are valid:
unknown(1)
The fault tolerant state could not be determined. The
instrument agent may need to be upgraded.
active(2)
The adapter is actively participating in the network.
This state is displayed for adapters that are not part
of a fault tolerant group and for adapters in a fault
tolerant group that are not in the standby state.
standby(3)
The adapter is ready to assume network activity in case
of a failure of the active adapter.
failed(4)
The adapter has failed and cannot participate on the
network.
Parsed from file CPQNIC-MIB.mib
Module: CPQNIC-MIB
cpqNicIfPhysAdapterState OBJECT-TYPE SYNTAX INTEGER { unknown(1), active(2), standby(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The fault tolerant state of this adapter. Although this value is valid for adapters that are not part of a fault tolerant group, it only provides additional information when the adapter participates in a group. The following values are valid: unknown(1) The fault tolerant state could not be determined. The instrument agent may need to be upgraded. active(2) The adapter is actively participating in the network. This state is displayed for adapters that are not part of a fault tolerant group and for adapters in a fault tolerant group that are not in the standby state. standby(3) The adapter is ready to assume network activity in case of a failure of the active adapter. failed(4) The adapter has failed and cannot participate on the network." ::= { cpqNicIfPhysAdapterEntry 13 }
Vendor: Compaq
Module: CPQNIC-MIB
[Automatically extracted from oidview.com]
cpqNicIfPhysAdapterState OBJECT-TYPE SYNTAX INTEGER { unknown(1), active(2), standby(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The fault tolerant state of this adapter. Although this value is valid for adapters that are not part of a fault tolerant group, it only provides additional information when the adapter participates in a group. The following values are valid: unknown(1) The fault tolerant state could not be determined. The instrument agent may need to be upgraded. active(2) The adapter is actively participating in the network. This state is displayed for adapters that are not part of a fault tolerant group and for adapters in a fault tolerant group that are not in the standby state. standby(3) The adapter is ready to assume network activity in case of a failure of the active adapter. failed(4) The adapter has failed and cannot participate on the network." ::= { cpqNicIfPhysAdapterEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.18.2.3.1.1.1 | cpqNicIfPhysAdapterIndex | 0 | 0 | An index that uniquely specifies this entry. |
| 1.3.6.1.4.1.232.18.2.3.1.1.2 | cpqNicIfPhysAdapterIfNumber | 0 | 0 | An OCTET STRING representing an array of MIB II Interface Numbers implemented by this physical adapter. Each entry is a 32-bit va… |
| 1.3.6.1.4.1.232.18.2.3.1.1.3 | cpqNicIfPhysAdapterRole | 0 | 0 | The role this physical adapter has in the logical group. The following values are valid: unknown(1) The role of the adapter could … |
| 1.3.6.1.4.1.232.18.2.3.1.1.4 | cpqNicIfPhysAdapterMACAddress | 0 | 0 | The physical (MAC) address of the adapter. In some configurations this may be a null length octet string. |
| 1.3.6.1.4.1.232.18.2.3.1.1.5 | cpqNicIfPhysAdapterSlot | 0 | 0 | The number of the slot containing the physical hardware that implements this interface. The number zero (0) indicates an embedde… |
| 1.3.6.1.4.1.232.18.2.3.1.1.6 | cpqNicIfPhysAdapterIoAddr | 0 | 0 | The base I/O address of the physical adapter. The number zero (0) indicates that the device does not use I/O mapped addresses or… |
| 1.3.6.1.4.1.232.18.2.3.1.1.7 | cpqNicIfPhysAdapterIrq | 0 | 0 | The number of the IRQ (interrupt) used for this physical hardware interface. The number zero (0) indicates that this device does… |
| 1.3.6.1.4.1.232.18.2.3.1.1.8 | cpqNicIfPhysAdapterDma | 0 | 0 | The number of the DMA channel used for this physical hardware interface. The number -1 indicates that this device does not use a… |
| 1.3.6.1.4.1.232.18.2.3.1.1.9 | cpqNicIfPhysAdapterMemAddr | 0 | 0 | The base memory address used by this physical hardware interface. The number zero (0) indicates that this device does not use sy… |
| 1.3.6.1.4.1.232.18.2.3.1.1.10 | cpqNicIfPhysAdapterPort | 0 | 0 | The port number of the interface for multi-port NICs. A port number of -1 indicates that the port could not be determined. |
| 1.3.6.1.4.1.232.18.2.3.1.1.11 | cpqNicIfPhysAdapterDuplexState | 0 | 0 | This variable describes the current duplex state of the adapter. A value of unknown indicates that the duplex state could not be… |
| 1.3.6.1.4.1.232.18.2.3.1.1.12 | cpqNicIfPhysAdapterCondition | 0 | 0 | The condition of this physical adapter. This value is driven by the cpqNicIfPhysAdapterStatus object as follows: other(1) Indicates… |
| 1.3.6.1.4.1.232.18.2.3.1.1.14 | cpqNicIfPhysAdapterStatus | 0 | 0 | The physical adapter status. The following values are valid: unknown(1) The instrument agent was not able to determine the status o… |
| 1.3.6.1.4.1.232.18.2.3.1.1.15 | cpqNicIfPhysAdapterStatsValid | 0 | 0 | This value indicates whether the following statistics in the table are accurate. Some adapters may not be able to report the sta… |
| 1.3.6.1.4.1.232.18.2.3.1.1.16 | cpqNicIfPhysAdapterGoodTransmits | 0 | 0 | A count of frames successfully transmitted by the physical adapter. |
| 1.3.6.1.4.1.232.18.2.3.1.1.17 | cpqNicIfPhysAdapterGoodReceives | 0 | 0 | A count of frames successfully received by the physical adapter. |
| 1.3.6.1.4.1.232.18.2.3.1.1.18 | cpqNicIfPhysAdapterBadTransmits | 0 | 0 | A count of frames that were not transmitted by the adapter because of an error. This counter is the sum of MIB items cpqNicIfPhy… |
| 1.3.6.1.4.1.232.18.2.3.1.1.19 | cpqNicIfPhysAdapterBadReceives | 0 | 0 | A count of frames that were received by the adapter but which had an error. This counter is the sum of mib items cpqNicIfPhysAda… |
| 1.3.6.1.4.1.232.18.2.3.1.1.20 | cpqNicIfPhysAdapterAlignmentErrors | 0 | 0 | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS … |
| 1.3.6.1.4.1.232.18.2.3.1.1.21 | cpqNicIfPhysAdapterFCSErrors | 0 | 0 | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS chec… |
| 1.3.6.1.4.1.232.18.2.3.1.1.22 | cpqNicIfPhysAdapterSingleCollisionFrames | 0 | 0 | The number of single collision packets: This counter contains the number of packets that are involved in a single collision and ar… |
| 1.3.6.1.4.1.232.18.2.3.1.1.23 | cpqNicIfPhysAdapterMultipleCollisionFrames | 0 | 0 | The number of multiple collision packets: This counter contains the number of packets that are involved in multiple collisions an… |
| 1.3.6.1.4.1.232.18.2.3.1.1.24 | cpqNicIfPhysAdapterDeferredTransmissions | 0 | 0 | The number of packets deferred before transmission: This counter contains the number of packets whose transmission was delayed on… |
| 1.3.6.1.4.1.232.18.2.3.1.1.25 | cpqNicIfPhysAdapterLateCollisions | 0 | 0 | Late collisions may be a symptom of cabling problems. A late collision is one that occurred 64 bytes or more into the packet. Lat… |
| 1.3.6.1.4.1.232.18.2.3.1.1.26 | cpqNicIfPhysAdapterExcessiveCollisions | 0 | 0 | The number of packets aborted during transmission due to excessive collisions: This counter contains the number of packets that, … |
| 1.3.6.1.4.1.232.18.2.3.1.1.27 | cpqNicIfPhysAdapterInternalMacTransmitErrors | 0 | 0 | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame … |
| 1.3.6.1.4.1.232.18.2.3.1.1.28 | cpqNicIfPhysAdapterCarrierSenseErrors | 0 | 0 | The number of packets transmitted with carrier sense errors: This counter contains the number of times that the carrier sense si… |
| 1.3.6.1.4.1.232.18.2.3.1.1.29 | cpqNicIfPhysAdapterFrameTooLongs | 0 | 0 | A count of frames received on a particular interface that exceed the maximum permitted frame size. |
| 1.3.6.1.4.1.232.18.2.3.1.1.30 | cpqNicIfPhysAdapterInternalMacReceiveErrors | 0 | 0 | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is o… |
| 1.3.6.1.4.1.232.18.2.3.1.1.31 | cpqNicIfPhysAdapterHwLocation | 0 | 0 | A text description of the hardware location, on complex multi SBB hardware only, for the physical adapter. A NULL string indicate… |
| 1.3.6.1.4.1.232.18.2.3.1.1.32 | cpqNicIfPhysAdapterPartNumber | 0 | 0 | A text description of the hardware part number. |
| 1.3.6.1.4.1.232.18.2.3.1.1.33 | cpqNicIfPhysAdapterSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
| 1.3.6.1.4.1.232.18.2.3.1.1.34 | cpqNicIfPhysAdapterConfSpeedDuplex | 0 | 0 | The physical adapter configured speed and duplex. The following values are valid: other(1) The configured speed and duplex are unk… |
| 1.3.6.1.4.1.232.18.2.3.1.1.35 | cpqNicIfPhysAdapterAggregationGID | 0 | 0 | Aggregation group number of the adapter. A value of -1 means the Aggregation group number could not be determined or not present. |
| 1.3.6.1.4.1.232.18.2.3.1.1.36 | cpqNicIfPhysAdapterSpeedMbps | 0 | 0 | An estimate of the interface's current bandwidth in Megabits per second. For interfaces which do not vary in bandwidth or for th… |
| 1.3.6.1.4.1.232.18.2.3.1.1.37 | cpqNicIfPhysAdapterInOctets | 0 | 0 | A count of Octets Received on the physical adapter. This includes traffic generated due to different protocols like TCP/IP, DECNE… |
| 1.3.6.1.4.1.232.18.2.3.1.1.38 | cpqNicIfPhysAdapterOutOctets | 0 | 0 | A count of Octets Sent on the physical adapter. This includes traffic generated due to different protocols like TCP/IP, DECNET etc |
| 1.3.6.1.4.1.232.18.2.3.1.1.39 | cpqNicIfPhysAdapterName | 0 | 0 | Name of the physical adapter. This string is NULL terminated. |
| 1.3.6.1.4.1.232.18.2.3.1.1.40 | cpqNicIfPhysAdapterIoBayNo | 0 | 0 | Identifies the Interconnect Bay Number to which the adapter is connected in a Blade Environment. A value of -1 means the Interco… |
| 1.3.6.1.4.1.232.18.2.3.1.1.41 | cpqNicIfPhysAdapterFWVersion | 0 | 0 | Firmware version of the physical adapter. This string is NULL terminated. |
| 1.3.6.1.4.1.232.18.2.3.1.1.42 | cpqNicIfPhysAdapterVirtualPortNumber | 0 | 0 | Identifies the virtual port number of a partioned adapter . A value of -1 means the virtual port number could not be determined … |