The base I/O address of the physical adapter. The number
zero (0) indicates that the device does not use I/O mapped
addresses or this information is unavailable.
Parsed from file CPQNIC1.MIB.txt
Company: None
Module: CPQNIC-MIB
The base I/O address of the physical adapter. The number
zero (0) indicates that the device does not use I/O mapped
addresses or this information is unavailable.
Parsed from file CPQNIC-MIB.mib
Module: CPQNIC-MIB
cpqNicIfPhysAdapterIoAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The base I/O address of the physical adapter. The number zero (0) indicates that the device does not use I/O mapped addresses or this information is unavailable." ::= { cpqNicIfPhysAdapterEntry 6 }
Vendor: Compaq
Module: CPQNIC-MIB
[Automatically extracted from oidview.com]
cpqNicIfPhysAdapterIoAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The base I/O address of the physical adapter. The number zero (0) indicates that the device does not use I/O mapped addresses or this information is unavailable." ::= { cpqNicIfPhysAdapterEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.18.2.3.1.1.1 | cpqNicIfPhysAdapterIndex | 0 | 0 | An index that uniquely specifies this entry. |
1.3.6.1.4.1.232.18.2.3.1.1.2 | cpqNicIfPhysAdapterIfNumber | 0 | 0 | An OCTET STRING representing an array of MIB II Interface Numbers implemented by this physical adapter. Each entry is a 32-bit va… |
1.3.6.1.4.1.232.18.2.3.1.1.3 | cpqNicIfPhysAdapterRole | 0 | 0 | The role this physical adapter has in the logical group. The following values are valid: unknown(1) The role of the adapter could … |
1.3.6.1.4.1.232.18.2.3.1.1.4 | cpqNicIfPhysAdapterMACAddress | 0 | 0 | The physical (MAC) address of the adapter. In some configurations this may be a null length octet string. |
1.3.6.1.4.1.232.18.2.3.1.1.5 | cpqNicIfPhysAdapterSlot | 0 | 0 | The number of the slot containing the physical hardware that implements this interface. The number zero (0) indicates an embedde… |
1.3.6.1.4.1.232.18.2.3.1.1.7 | cpqNicIfPhysAdapterIrq | 0 | 0 | The number of the IRQ (interrupt) used for this physical hardware interface. The number zero (0) indicates that this device does… |
1.3.6.1.4.1.232.18.2.3.1.1.8 | cpqNicIfPhysAdapterDma | 0 | 0 | The number of the DMA channel used for this physical hardware interface. The number -1 indicates that this device does not use a… |
1.3.6.1.4.1.232.18.2.3.1.1.9 | cpqNicIfPhysAdapterMemAddr | 0 | 0 | The base memory address used by this physical hardware interface. The number zero (0) indicates that this device does not use sy… |
1.3.6.1.4.1.232.18.2.3.1.1.10 | cpqNicIfPhysAdapterPort | 0 | 0 | The port number of the interface for multi-port NICs. A port number of -1 indicates that the port could not be determined. |
1.3.6.1.4.1.232.18.2.3.1.1.11 | cpqNicIfPhysAdapterDuplexState | 0 | 0 | This variable describes the current duplex state of the adapter. A value of unknown indicates that the duplex state could not be… |
1.3.6.1.4.1.232.18.2.3.1.1.12 | cpqNicIfPhysAdapterCondition | 0 | 0 | The condition of this physical adapter. This value is driven by the cpqNicIfPhysAdapterStatus object as follows: other(1) Indicates… |
1.3.6.1.4.1.232.18.2.3.1.1.13 | cpqNicIfPhysAdapterState | 0 | 0 | The fault tolerant state of this adapter. Although this value is valid for adapters that are not part of a fault tolerant group,… |
1.3.6.1.4.1.232.18.2.3.1.1.14 | cpqNicIfPhysAdapterStatus | 0 | 0 | The physical adapter status. The following values are valid: unknown(1) The instrument agent was not able to determine the status o… |
1.3.6.1.4.1.232.18.2.3.1.1.15 | cpqNicIfPhysAdapterStatsValid | 0 | 0 | This value indicates whether the following statistics in the table are accurate. Some adapters may not be able to report the sta… |
1.3.6.1.4.1.232.18.2.3.1.1.16 | cpqNicIfPhysAdapterGoodTransmits | 0 | 0 | A count of frames successfully transmitted by the physical adapter. |
1.3.6.1.4.1.232.18.2.3.1.1.17 | cpqNicIfPhysAdapterGoodReceives | 0 | 0 | A count of frames successfully received by the physical adapter. |
1.3.6.1.4.1.232.18.2.3.1.1.18 | cpqNicIfPhysAdapterBadTransmits | 0 | 0 | A count of frames that were not transmitted by the adapter because of an error. This counter is the sum of MIB items cpqNicIfPhy… |
1.3.6.1.4.1.232.18.2.3.1.1.19 | cpqNicIfPhysAdapterBadReceives | 0 | 0 | A count of frames that were received by the adapter but which had an error. This counter is the sum of mib items cpqNicIfPhysAda… |
1.3.6.1.4.1.232.18.2.3.1.1.20 | cpqNicIfPhysAdapterAlignmentErrors | 0 | 0 | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS … |
1.3.6.1.4.1.232.18.2.3.1.1.21 | cpqNicIfPhysAdapterFCSErrors | 0 | 0 | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS chec… |
1.3.6.1.4.1.232.18.2.3.1.1.22 | cpqNicIfPhysAdapterSingleCollisionFrames | 0 | 0 | The number of single collision packets: This counter contains the number of packets that are involved in a single collision and ar… |
1.3.6.1.4.1.232.18.2.3.1.1.23 | cpqNicIfPhysAdapterMultipleCollisionFrames | 0 | 0 | The number of multiple collision packets: This counter contains the number of packets that are involved in multiple collisions an… |
1.3.6.1.4.1.232.18.2.3.1.1.24 | cpqNicIfPhysAdapterDeferredTransmissions | 0 | 0 | The number of packets deferred before transmission: This counter contains the number of packets whose transmission was delayed on… |
1.3.6.1.4.1.232.18.2.3.1.1.25 | cpqNicIfPhysAdapterLateCollisions | 0 | 0 | Late collisions may be a symptom of cabling problems. A late collision is one that occurred 64 bytes or more into the packet. Lat… |
1.3.6.1.4.1.232.18.2.3.1.1.26 | cpqNicIfPhysAdapterExcessiveCollisions | 0 | 0 | The number of packets aborted during transmission due to excessive collisions: This counter contains the number of packets that, … |
1.3.6.1.4.1.232.18.2.3.1.1.27 | cpqNicIfPhysAdapterInternalMacTransmitErrors | 0 | 0 | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame … |
1.3.6.1.4.1.232.18.2.3.1.1.28 | cpqNicIfPhysAdapterCarrierSenseErrors | 0 | 0 | The number of packets transmitted with carrier sense errors: This counter contains the number of times that the carrier sense si… |
1.3.6.1.4.1.232.18.2.3.1.1.29 | cpqNicIfPhysAdapterFrameTooLongs | 0 | 0 | A count of frames received on a particular interface that exceed the maximum permitted frame size. |
1.3.6.1.4.1.232.18.2.3.1.1.30 | cpqNicIfPhysAdapterInternalMacReceiveErrors | 0 | 0 | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is o… |
1.3.6.1.4.1.232.18.2.3.1.1.31 | cpqNicIfPhysAdapterHwLocation | 0 | 0 | A text description of the hardware location, on complex multi SBB hardware only, for the physical adapter. A NULL string indicate… |
1.3.6.1.4.1.232.18.2.3.1.1.32 | cpqNicIfPhysAdapterPartNumber | 0 | 0 | A text description of the hardware part number. |
1.3.6.1.4.1.232.18.2.3.1.1.33 | cpqNicIfPhysAdapterSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
1.3.6.1.4.1.232.18.2.3.1.1.34 | cpqNicIfPhysAdapterConfSpeedDuplex | 0 | 0 | The physical adapter configured speed and duplex. The following values are valid: other(1) The configured speed and duplex are unk… |
1.3.6.1.4.1.232.18.2.3.1.1.35 | cpqNicIfPhysAdapterAggregationGID | 0 | 0 | Aggregation group number of the adapter. A value of -1 means the Aggregation group number could not be determined or not present. |
1.3.6.1.4.1.232.18.2.3.1.1.36 | cpqNicIfPhysAdapterSpeedMbps | 0 | 0 | An estimate of the interface's current bandwidth in Megabits per second. For interfaces which do not vary in bandwidth or for th… |
1.3.6.1.4.1.232.18.2.3.1.1.37 | cpqNicIfPhysAdapterInOctets | 0 | 0 | A count of Octets Received on the physical adapter. This includes traffic generated due to different protocols like TCP/IP, DECNE… |
1.3.6.1.4.1.232.18.2.3.1.1.38 | cpqNicIfPhysAdapterOutOctets | 0 | 0 | A count of Octets Sent on the physical adapter. This includes traffic generated due to different protocols like TCP/IP, DECNET etc |
1.3.6.1.4.1.232.18.2.3.1.1.39 | cpqNicIfPhysAdapterName | 0 | 0 | Name of the physical adapter. This string is NULL terminated. |
1.3.6.1.4.1.232.18.2.3.1.1.40 | cpqNicIfPhysAdapterIoBayNo | 0 | 0 | Identifies the Interconnect Bay Number to which the adapter is connected in a Blade Environment. A value of -1 means the Interco… |
1.3.6.1.4.1.232.18.2.3.1.1.41 | cpqNicIfPhysAdapterFWVersion | 0 | 0 | Firmware version of the physical adapter. This string is NULL terminated. |
1.3.6.1.4.1.232.18.2.3.1.1.42 | cpqNicIfPhysAdapterVirtualPortNumber | 0 | 0 | Identifies the virtual port number of a partioned adapter . A value of -1 means the virtual port number could not be determined … |