The number of ASR timer reboots that should cause the server to
boot the firmware console and override the standard reboot
setting (cpqHeAsrReboot). If this value is 0 then no limit is
defined and the standard reboot option will always be used. If
the variable is not supported, a value of -1 will be returned.
Parsed from file CPQHLTH3.MIB.txt
Company: None
Module: CPQHLTH-MIB
cpqHeAsrRebootLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ASR timer reboots that should cause the server to
boot the firmware console and override the standard reboot
setting (cpqHeAsrReboot). If this value is 0 then no limit is
defined and the standard reboot option will always be used. If
the variable is not supported, a value of -1 will be returned."
-- :CPQ,DEV:
-- This is the value of the CQHRLM EV. This variable is to be in the range
-- -1..255. The NetWare MIB compiler does not allow enforcement of this range
-- via the SYNTAX definition; therefore, range checking is up to the developer.
-- :CPQ,ENDDEV:
View at oid-info.com
The number of ASR timer reboots that should cause the server to
boot the firmware console and override the standard reboot
setting (cpqHeAsrReboot). If this value is 0 then no limit is
defined and the standard reboot option will always be used. If
the variable is not supported, a value of -1 will be returned.
Parsed from file CPQHLTH-MIB.mib
Module: CPQHLTH-MIB
cpqHeAsrRebootLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ASR timer reboots that should cause the server to boot the firmware console and override the standard reboot setting (cpqHeAsrReboot). If this value is 0 then no limit is defined and the standard reboot option will always be used. If the variable is not supported, a value of -1 will be returned." ::= { cpqHeAsr 9 }
Automatically extracted from a module checked by a user of the Asnp syntax-checking tool
cpqHeAsrRebootLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of ASR timer reboots that should cause the server to boot the firmware console and override the standard reboot setting (cpqHeAsrReboot). If this value is 0 then no limit is defined and the standard reboot option will always be used. If the variable is not supported, a value of -1 will be returned." ::= { cpqHeAsr 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.6.2.5.9.0 | cpqHeAsrRebootLimit | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.6.2.5.1 | cpqHeAsrStatus | 1 | 1 | The Automatic Server Recovery feature status. If this object is currently other(1) or notAvailable(2) all set operations will fai… |
1.3.6.1.4.1.232.6.2.5.2 | cpqHeAsrMajorVersion | 1 | 1 | The major version number of the Automatic Server Recovery feature hardware. |
1.3.6.1.4.1.232.6.2.5.3 | cpqHeAsrMinorVersion | 1 | 1 | The minor version number of the Automatic Server Recovery feature hardware. |
1.3.6.1.4.1.232.6.2.5.4 | cpqHeAsrTimeout | 1 | 1 | The time-out in minutes for the Automatic Server Recovery feature hardware. If the variable is not supported, a value of -1 will… |
1.3.6.1.4.1.232.6.2.5.5 | cpqHeAsrBaseIo | 1 | 1 | The Automatic Server Recovery feature Base I/O address. |
1.3.6.1.4.1.232.6.2.5.6 | cpqHeAsrPost | 1 | 1 | Indicates if the Automatic Server Recovery timer passed the server power-on self test. |
1.3.6.1.4.1.232.6.2.5.7 | cpqHeAsrReset | 1 | 1 | Indicates if the previous reset was caused by the ASR timer. An asrReset(3) condition may be changed with a viewed-asrReset(4) se… |
1.3.6.1.4.1.232.6.2.5.8 | cpqHeAsrReboot | 1 | 1 | Indicates what software should be started when the server is rebooted by the ASR feature. If this object is currently set to othe… |
1.3.6.1.4.1.232.6.2.5.10 | cpqHeAsrRebootCount | 1 | 1 | The number of ASR reboots that have occurred on this server since the last manual reboot. Reboot count may be reset with a zero v… |
1.3.6.1.4.1.232.6.2.5.11 | cpqHeAsrPagerStatus | 1 | 1 | The status of the ASR pager feature. If the current value of this object is not other(1), it may be set to disabled(2) or enabled… |
1.3.6.1.4.1.232.6.2.5.12 | cpqHeAsrPagerNumber | 1 | 1 | The pager number to be dialed after an ASR reboot. |
1.3.6.1.4.1.232.6.2.5.13 | cpqHeAsrCommPort | 1 | 1 | The communication port to be used by the firmware pager and console. The value zero (0) indicates this setting is undefined. If … |
1.3.6.1.4.1.232.6.2.5.14 | cpqHeAsrBaudRate | 1 | 1 | The baud rate to be used by the firmware pager and console. The value zero (0) indicates this setting is undefined. If the varia… |
1.3.6.1.4.1.232.6.2.5.15 | cpqHeAsrPagerMessage | 1 | 1 | The 8 character pager message entered by the user. |
1.3.6.1.4.1.232.6.2.5.16 | cpqHeAsrBootFail | 1 | 1 | The action to be taken if an ASR reboot failure occurs. |
1.3.6.1.4.1.232.6.2.5.17 | cpqHeAsrCondition | 1 | 1 | This value specifies the overall condition of the ASR feature. |
1.3.6.1.4.1.232.6.2.5.18 | cpqHeAsrDialInStatus | 1 | 1 | The status of the ASR dial in feature. If the current value of this object is other(1) any attempt to set this object from a mana… |
1.3.6.1.4.1.232.6.2.5.19 | cpqHeAsrDialOutStatus | 1 | 1 | The status of the ASR dial out feature. If the current value of this object is other(1) any attempt to set this object from a man… |
1.3.6.1.4.1.232.6.2.5.20 | cpqHeAsrDialOutNumber | 1 | 1 | The phone number to be dialed for remote diagnostics if an ASR reset occurs. |
1.3.6.1.4.1.232.6.2.5.21 | cpqHeAsrNetworkAccessStatus | 1 | 1 | The status of the ASR network access feature. If the current value of this object is other(1) any attempt to set this object from… |
1.3.6.1.4.1.232.6.2.5.22 | cpqHeAsrPollTime | 0 | 0 | The poll time in seconds the ASR watchdog timer is being refreshed periodically. |