An indication of the latest version of the ATM UNI
Specification that is supported on this UNI. If
this value is not present, a version of the UNI
earlier than 3.0 is supported. If a value greater
than version 4.0 is present, then UNI 4.0
communication should be attempted.
If the peer UME's value of this object is the same
as, or later than the local UME's value, then the
version corresponding to the local UME's value should
be attempted. Otherwise, if the peer UME's value of
this object is earlier, and supported locally, then
the local UME should attempt the version corresponding
to the peer UME's value. Otherwise, compatibility
of the two UMEs cannot be assumed.
The changes will become active ONLY AFTER REBOOTING
the system.
Parsed from file mariposa.mib.txt
Company: marconi
Module: MARIPOSA-MIB
Vendor: Marconi
Module: MARIPOSA-MIB (mariposa.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmSigSapUniVersion OBJECT-TYPE SYNTAX INTEGER { uni3point0 (1), uni3point1 (2), uni4point0 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "An indication of the latest version of the ATM UNI Specification that is supported on this UNI. If this value is not present, a version of the UNI earlier than 3.0 is supported. If a value greater than version 4.0 is present, then UNI 4.0 communication should be attempted. If the peer UME's value of this object is the same as, or later than the local UME's value, then the version corresponding to the local UME's value should be attempted. Otherwise, if the peer UME's value of this object is earlier, and supported locally, then the local UME should attempt the version corresponding to the peer UME's value. Otherwise, compatibility of the two UMEs cannot be assumed. The changes will become active ONLY AFTER REBOOTING the system." ::= { atmSigSapParEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.1 | atmSigSapIfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.2 | atmSigSapSigVpi | 0 | 0 | Signaling VPI. Default value is zero and it is only for SAP numbers less than 16.The valid range is 0 through 3. |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.3 | atmSigSapSigVci | 0 | 0 | Signaling VCI. Default value is 5 and it is only for SAP numbers less than 16.The valid range is 0 through 1023. |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.5 | atmSigSapDeviceType | 0 | 0 | Interface type which can be User or Network. |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.6 | atmSigSapTimerT301 | 0 | 0 | only supported in UNI40/Q2931 (def=327 ~180s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.7 | atmSigSapTimerT303 | 0 | 0 | SETUP sent timer (t303) in milli-seconds (def=7 ~4s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.8 | atmSigSapTimerT308 | 0 | 0 | Release sent timer (t308) in milli-seconds (def=55 ~30s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.9 | atmSigSapTimerT309 | 0 | 0 | SAAL disconnection calls/ SAAL down timer (t309) in milli-seconds (def=18 ~10s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.10 | atmSigSapTimerT310 | 0 | 0 | Call Proceeding received timer (t310) in milli-seconds (def=18 ~10s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.11 | atmSigSapTimerT313 | 0 | 0 | CONNECT sent (def=7 ~4s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.12 | atmSigSapTimerT316 | 0 | 0 | Restart sent timer (t316) in milli-seconds (def=109 ~60s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.13 | atmSigSapTimerT316c | 0 | 0 | Restart channel sent timer (t316c) in milli-seconds (def=109 ~60s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.14 | atmSigSapTimerT322 | 0 | 0 | Status Inquiry sent timer (t322) in milli-seconds (def=7 ~4s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.15 | atmSigSapTimerTcon | 0 | 0 | Data Link (SAAL) connect sent timer (tCon). (def=36 ~20s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.16 | atmSigSapTimerTrecon | 0 | 0 | Data Link (SAAL) connect resent timer (tRecon) in milli-seconds (def=4 ~2s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.17 | atmSigSapTimerTdisc | 0 | 0 | Data Link (SAAL) Disconnect sent timer (tDisc) in milli-seconds (def=36 ~20s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.18 | atmSigSapMaxCc | 0 | 0 | SSCOP Max Connection Control (CC) Timer in milli-seconds. Default: 4. |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.19 | atmSigSapMaxPd | 0 | 0 | SSCOP Max Poll Data (PD) in milli-seconds. Default: 25. |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.20 | atmSigSapMaxStat | 0 | 0 | SSCOP Max Solicited Status (STAT) in milli-seconds. Default: 67. |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.21 | atmSigSapTimerCc | 0 | 0 | SSCOP Max Connection Control (CC) in milli-seconds (def=2 ~1s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.22 | atmSigSapTimerKeepalive | 0 | 0 | Keep Alive timer in milli-seconds (def=4 ~2s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.23 | atmSigSapTimerNoResponse | 0 | 0 | No Response Timer in milli-seconds (def=18 ~10s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.24 | atmSigSapTimerPoll | 0 | 0 | Poll Timer in milli-seconds (def=2 ~1s). |
| 1.3.6.1.4.1.2426.1.2.3.4.1.2.1.25 | atmSigSapTimerIdle | 0 | 0 | Timer Idle in milli-seconds (def=273 ~15s). |