This variable describes the variety of Zero Code
Suppression that is currently used on this interface,
which in turn affects a number of its characteristics.
Since this object specifies the line coding that is
effective, it should match the current link type
(scesPhyCurrentLineType). The line coding of the stored
link type (scesPhyStoredLineType) that will become effective
after reboot should be set through 'stored line coding'
(scesPhyStoredLineCoding). The possible values of this
object have the following meanings:
1) B8ZS refers to the use of a specified pattern of
normal bits and bipolar violations which are used
to replace a sequence of eight zero bits.
2) AMI: Alternate Mark Inversion refers to a mode
wherein no zero code suppression is present and
the line encoding does not solve the problem directly.
In this application, the higher layer must provide
data which meets or exceeds the pulse density
requirements, such as inverting HDLC data.
3) HDB3: High Density Bipolar Order 3 encoding is a
bipolar signaling technique based on AMI but extends
this by inserting violation codes whenever there is a
run of 4 or more 0's.
E1 links, with or without CRC, use HDB3 or AMI.
Default for T1: B8ZS, for E1: HDB3.
Parsed from file mariposa.mib.txt
Company: marconi
Module: MARIPOSA-MIB
Vendor: Marconi
Module: MARIPOSA-MIB (mariposa.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
scesPhyCurrentLineCoding OBJECT-TYPE SYNTAX INTEGER { b8ZS (1), aMI (2), hdb3 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable describes the variety of Zero Code Suppression that is currently used on this interface, which in turn affects a number of its characteristics. Since this object specifies the line coding that is effective, it should match the current link type (scesPhyCurrentLineType). The line coding of the stored link type (scesPhyStoredLineType) that will become effective after reboot should be set through 'stored line coding' (scesPhyStoredLineCoding). The possible values of this object have the following meanings: 1) B8ZS refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. 2) AMI: Alternate Mark Inversion refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data. 3) HDB3: High Density Bipolar Order 3 encoding is a bipolar signaling technique based on AMI but extends this by inserting violation codes whenever there is a run of 4 or more 0's. E1 links, with or without CRC, use HDB3 or AMI. Default for T1: B8ZS, for E1: HDB3." ::= { scesPhyEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.1 | scesPhyIfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.2 | scesPhyCurrentLineType | 0 | 0 | This object indicates the type of the line implementing this circuit. It defines the link type that is currently active in the sy… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.3 | scesPhyStoredLineType | 0 | 0 | This object indicates the type of the line implementing this circuit that is saved in the flash. When the value of this object … |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.4 | scesPhyCurrentFraming | 0 | 0 | This object indicates the framing type that is used for this circuit. It defines the framing type that is currently active in the… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.5 | scesPhyStoredFraming | 0 | 0 | This object indicates the framing type that is used for this circuit. It defines the framing type. The values, in sequence, desc… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.7 | scesPhyStoredLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression of this interface that is saved in the flash. When the value of this… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.8 | scesPhyLineLength | 0 | 0 | The length of the ds1 line in meters. This objects provides information for line build out circuitry if it exists and can use thi… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.9 | scesPhyTxClockSource | 0 | 0 | The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'SystemTiming… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.10 | scesPhyLoopbackMode | 0 | 0 | This variable represents the desired loopback configuration of the interface. Agents supporting read/write access should return b… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.11 | scesPhySignalingMode | 0 | 0 | This object specifies signaling mode for SCES link. This can have CCS mode, CAS mode, CES Basic mode or CES with CAS, CAS Without… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.12 | scesPhyAlarmReporting | 0 | 0 | This object identifies the Alarm Reporting of the sces voice. |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.13 | scesPhyVoiceCompanding | 0 | 0 | This object specifies the channel the voice companding technique - either A-law or mode. |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.14 | scesPhySystemClockSource | 0 | 0 | This object identifies the System Clock Source. It can be 1.Internal 2.ATM 3.CBR |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.15 | scesPhySystemClockSourceStatus | 0 | 0 | This objects specifies whether the clock source defined by 'systemClockSource' is refering to a valid resource or not. If the spe… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.16 | scesPhyLossOfSignalState | 0 | 0 | Near end Loss Of Signal. When cells are continuously lost the value is set to loss (2). When cells are no longer lost, the value … |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.17 | scesPhyLossOfFrameState | 0 | 0 | Near end LOF (a.k.a., Red Alarm). For DS1 links, the Loss Of Frame failure is declared when an OOF or LOS defect has persisted fo… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.18 | scesPhyXmtFarEndLOFFState | 0 | 0 | Near End is sending the LOF indication. |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.19 | scesPhyRcvFarEndLOFFState | 0 | 0 | The Far End LOF failure Alarm is also known as Yellow Alarm in the DS1 case, and Distant Alarm in the E1 case. For D4 links, the F… |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.20 | scesPhyAISFState | 0 | 0 | Far end sending Alarm Indication Signal(AIS) a.k.a Remote Alarm Indication (RAI). For D4 and ESF links, the 'all ones' condition … |
| 1.3.6.1.4.1.2426.1.2.6.7.1.1.1.1.21 | scesPhyXmtAISFState | 0 | 0 | Near end sending Alarm Indication Signal(AIS). For D4 and ESF links, the 'all ones' condition is detected at a DS1 line interface… |