The maximum number of slots that have been up.
Parsed from file gdc-apex.mib
Company: None
Module: DV2-MIB
The maximum number of slots that have been up.
Parsed from file DV2-MIB.mib
Module: DV2-MIB
Vendor: Netcomm, Ltd.
Module: DV2-MIB
[Automatically extracted from oidview.com]
slot0MaxUpSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of slots that have been up." ::= { dv2Slot0 7 }
slot0MaxUpSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of slots that have been up." ::= { dv2Slot0 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.251.1.1.2.7.0 | slot0MaxUpSlots | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.251.1.1.2.1 | slot0IntIp | 1 | 1 | IP address of SLOT 0 for ATM interface. |
1.3.6.1.4.1.251.1.1.2.2 | slot0XpInUse | 1 | 1 | The current Switch Fabric in Service |
1.3.6.1.4.1.251.1.1.2.3 | slot0XpToUse | 1 | 1 | This indicates the switch fabric card you want the switch to use. |
1.3.6.1.4.1.251.1.1.2.4 | slot0StandbyXp | 1 | 1 | Set to yes(1) to enable standby switch fabric. |
1.3.6.1.4.1.251.1.1.2.5 | slot0PsuTable | 1 | 14 | None |
1.3.6.1.4.1.251.1.1.2.6 | slot0PhyTable | 1 | 23 | This table summarises the hardware installed in the switch. |
1.3.6.1.4.1.251.1.1.2.8 | slot0CurrentUpSlots | 1 | 1 | The number of slots currently up. |
1.3.6.1.4.1.251.1.1.2.9 | slot0IsStandbySlot0 | 1 | 1 | Set to yes(2) if there is a redundant slot 0 available. |
1.3.6.1.4.1.251.1.1.2.10 | slot0TftpToStandby | 1 | 1 | Set to no(2) to stop files being transferred to the out of service slot0 automatically when they are changed. |
1.3.6.1.4.1.251.1.1.2.11 | slot0MibBroadcast | 1 | 1 | Broadcasts particular tables to all other slots. |
1.3.6.1.4.1.251.1.1.2.14 | slot0Address | 1 | 1 | The E.164 address of the switch. |
1.3.6.1.4.1.251.1.1.2.15 | slot0InUse | 1 | 1 | The Slot 0 card Redundancy Status. |
1.3.6.1.4.1.251.1.1.2.16 | slot0ToUse | 1 | 1 | This indicates the Slot 0 card you want the switch to use. |
1.3.6.1.4.1.251.1.1.2.17 | slot0redmode | 1 | 1 | The Slot 0 card Redundancy mode. |
1.3.6.1.4.1.251.1.1.2.18 | slot0IntIPMask | 1 | 1 | IP Mask for Internal Subnet. To reconfigure, Save new configuration and perform then warm Start. |
1.3.6.1.4.1.251.1.1.2.19 | slot0SwitchId | 1 | 1 | Switch ID for this Apex node |
1.3.6.1.4.1.251.1.1.2.20 | ntms0doc | 1 | 1 | Signifies that the S0DOC is capable of communicating with an NTM |
1.3.6.1.4.1.251.1.1.2.21 | slot0LecsPrefix | 1 | 1 | The NSAP network prefix for LECS. |
1.3.6.1.4.1.251.1.1.2.22 | slot0LecsESI | 1 | 1 | The NSAP ESI for LECS. |