This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.
Parsed from file cascade.mib.txt
Company: None
Module: CASCADE-MIB
This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.
Parsed from file CASCADE-MIB.mib
Module: CASCADE-MIB
Vendor: Cascade Communications Corp.
Module: CASCADE-MIB
[Automatically extracted from oidview.com]
dsx1Fdl OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL." ::= { dsx1ConfigEntry 13 }
dsx1Fdl OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL." ::= { dsx1ConfigEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.277.1.8.1.1.1 | dsx1SlotId, cascds1SlotId | 0 | 0 | The slot number of the corresponding DS1. |
1.3.6.1.4.1.277.1.8.1.1.2 | dsx1PortId, cascds1PortId | 0 | 0 | The port number of the corresponding DS1 on the board. |
1.3.6.1.4.1.277.1.8.1.1.3 | dsx1TimeElapsed, cascds1TimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
1.3.6.1.4.1.277.1.8.1.1.4 | dsx1ValidIntervals, cascds1ValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought o… |
1.3.6.1.4.1.277.1.8.1.1.5 | dsx1LineType, cascds1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
1.3.6.1.4.1.277.1.8.1.1.6 | dsx1LineCoding, cascds1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
1.3.6.1.4.1.277.1.8.1.1.7 | dsx1SendCode, cascds1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCo… |
1.3.6.1.4.1.277.1.8.1.1.8 | dsx1CircuitIdentifier, cascds1CircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
1.3.6.1.4.1.277.1.8.1.1.9 | dsx1LoopbackConfig, cascds1LoopbackConfig | 0 | 0 | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should retur… |
1.3.6.1.4.1.277.1.8.1.1.10 | dsx1LineStatus, cascds1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'a… |
1.3.6.1.4.1.277.1.8.1.1.11 | dsx1SignalMode, cascds1SignalMode | 0 | 0 | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is… |
1.3.6.1.4.1.277.1.8.1.1.12 | dsx1TransmitClockSource, cascds1TransmitClockSource | 0 | 0 | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTimin… |
1.3.6.1.4.1.277.1.8.1.1.14 | dsx1FdlVersion, cascds1FdlVersion | 0 | 0 | The version of the Dallas FDL firmware |