This is the number of seconds between successive
status enquiry messages sent by the DTE.
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.
Parsed from file rsfr.mi2.txt
Company: None
Module: REDSTONE-FRAME-RELAY-MIB
This is the number of seconds between successive
status enquiry messages sent by the DTE.
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.
Parsed from file REDSTONE-FRAME-RELAY-MIB.mib
Module: REDSTONE-FRAME-RELAY-MIB
Vendor: Redstone Communications, Inc.
Module: REDSTONE-FRAME-RELAY-MIB
[Automatically extracted from oidview.com]
rsFrDlcmiPollingInterval OBJECT-TYPE SYNTAX Integer32 (5..30) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI." REFERENCE "American National Standard T1.617-1991, Section D.7 Timer T391." DEFVAL { 10 } ::= { rsFrDlcmiEntry 5 }
rsFrDlcmiPollingInterval OBJECT-TYPE SYNTAX Integer32 (5..30) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI." REFERENCE "American National Standard T1.617-1991, Section D.7 Timer T391." DEFVAL { 10 } ::= { rsFrDlcmiEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2773.2.10.1.1.2.1.1 | rsFrDlcmiIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
1.3.6.1.4.1.2773.2.10.1.1.2.1.2 | rsFrDlcmiState | 0 | 0 | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame … |
1.3.6.1.4.1.2773.2.10.1.1.2.1.3 | rsFrDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
1.3.6.1.4.1.2773.2.10.1.1.2.1.4 | rsFrDlcmiAddressLen | 0 | 0 | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the add… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.6 | rsFrDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.7 | rsFrDlcmiErrorThreshold | 0 | 0 | The minimum number of errors that must be observed within the number of events specified by rsFrDlcmiMonitoredEvents, to declare … |
1.3.6.1.4.1.2773.2.10.1.1.2.1.8 | rsFrDlcmiMonitoredEvents | 0 | 0 | The number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' numbe… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.9 | rsFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a … |
1.3.6.1.4.1.2773.2.10.1.1.2.1.10 | rsFrDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service. |
1.3.6.1.4.1.2773.2.10.1.1.2.1.11 | rsFrDlcmiStatus | 0 | 0 | This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, th… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.12 | rsFrDlcmiRowStatus | 0 | 0 | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the fol… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.13 | rsFrDlcmiLowerIfIndex | 0 | 0 | The ifIndex of an interface over which this Frame Relay interface is to be layered. A value of zero indicates no layering. An imp… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.14 | rsFrDlcmiRole | 0 | 0 | Specifies the role this interface assumes with respect to the remote end. When acting as a DTE, the following objects are not re… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.15 | rsFrDlcmiDcePollingInterval | 0 | 0 | The number of seconds within which a DCE expects to receive a Status Enquiry from the DTE. This value corresponds to the T392 tim… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.16 | rsFrDlcmiDceErrorThreshold | 0 | 0 | The minimum number of errors that must be observed within the number of events specified by rsFrDlcmiDceMonitoredEvents, to decla… |
1.3.6.1.4.1.2773.2.10.1.1.2.1.17 | rsFrDlcmiDceMonitoredEvents | 0 | 0 | The number of DCE polling intervals over which accumulated errors are counted against the threshold specified in rsFrDlcmiDceErro… |