This variable indicates the Line Status of the
interface. It contains loopback, failure,
received 'alarm' and transmitted 'alarms
information.
The acDs1ConfigLineStatus is a bit map represented as a
sum, therefore, it can represent multiple failures
(alarms) and a LoopbackState simultaneously.
acDs1NoAlarm must be set if and only if no other
flag is set.
If the acDs1loopbackState bit is set, the loopback
in effect can be determined from the
acDs1loopbackConfig object.
The various bit positions are:
1 acDs1NoAlarm No alarm present
2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 acDs1XmtFarEndLOF Near end sending LOF Indication
8 acDs1RcvAIS Far end sending AIS
16 acDs1XmtAIS Near end sending AIS
32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 acDs1LossOfSignal Near end Loss Of Signal
128 acDs1LoopbackState Near end is looped
512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 acDs1RcvTestCode Near End detects a test code
4096 acDs1RcvFarEndRAI any line status not defined here
8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED
16384 acDs1NetEquipOOS Carrier Equipment Out of Service
Parsed from file pport_ds1.mib.txt
Company: None
Module: APPIAN-PPORT-DS1-MIB
This variable indicates the Line Status of the
interface. It contains loopback, failure,
received 'alarm' and transmitted 'alarms
information.
The acDs1ConfigLineStatus is a bit map represented as a
sum, therefore, it can represent multiple failures
(alarms) and a LoopbackState simultaneously.
acDs1NoAlarm must be set if and only if no other
flag is set.
If the acDs1loopbackState bit is set, the loopback
in effect can be determined from the
acDs1loopbackConfig object.
The various bit positions are:
1 acDs1NoAlarm No alarm present
2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 acDs1XmtFarEndLOF Near end sending LOF Indication
8 acDs1RcvAIS Far end sending AIS
16 acDs1XmtAIS Near end sending AIS
32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 acDs1LossOfSignal Near end Loss Of Signal
128 acDs1LoopbackState Near end is looped
512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 acDs1RcvTestCode Near End detects a test code
4096 acDs1RcvFarEndRAI any line status not defined here
8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED
16384 acDs1NetEquipOOS Carrier Equipment Out of Service
Parsed from file APPIAN-PPORT-DS1-MIB.mib
Module: APPIAN-PPORT-DS1-MIB
Vendor: Tecnopro SA
Module: APPIAN-PPORT-DS1-MIB
[Automatically extracted from oidview.com]
acDs1ConfigLineStatus OBJECT-TYPE SYNTAX INTEGER (1..131071) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The acDs1ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. acDs1NoAlarm must be set if and only if no other flag is set. If the acDs1loopbackState bit is set, the loopback in effect can be determined from the acDs1loopbackConfig object. The various bit positions are: 1 acDs1NoAlarm No alarm present 2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 acDs1XmtFarEndLOF Near end sending LOF Indication 8 acDs1RcvAIS Far end sending AIS 16 acDs1XmtAIS Near end sending AIS 32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 acDs1LossOfSignal Near end Loss Of Signal 128 acDs1LoopbackState Near end is looped 512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 acDs1RcvTestCode Near End detects a test code 4096 acDs1RcvFarEndRAI any line status not defined here 8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED 16384 acDs1NetEquipOOS Carrier Equipment Out of Service" ::= { acDs1ConfigEntry 18 }
acDs1ConfigLineStatus OBJECT-TYPE SYNTAX INTEGER (1..131071) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The acDs1ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. acDs1NoAlarm must be set if and only if no other flag is set. If the acDs1loopbackState bit is set, the loopback in effect can be determined from the acDs1loopbackConfig object. The various bit positions are: 1 acDs1NoAlarm No alarm present 2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 acDs1XmtFarEndLOF Near end sending LOF Indication 8 acDs1RcvAIS Far end sending AIS 16 acDs1XmtAIS Near end sending AIS 32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 acDs1LossOfSignal Near end Loss Of Signal 128 acDs1LoopbackState Near end is looped 512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 acDs1RcvTestCode Near End detects a test code 4096 acDs1RcvFarEndRAI any line status not defined here 8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED 16384 acDs1NetEquipOOS Carrier Equipment Out of Service" ::= { acDs1ConfigEntry 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2785.2.3.4.1.1.1 | acDs1ConfigNodeId | 0 | 0 | The node id is the id for this specific node in the OSAP ring. |
1.3.6.1.4.1.2785.2.3.4.1.1.2 | acDs1ConfigSlot | 0 | 0 | The physical slot number of the port. |
1.3.6.1.4.1.2785.2.3.4.1.1.3 | acDs1ConfigPort | 0 | 0 | The physical port number of the port |
1.3.6.1.4.1.2785.2.3.4.1.1.4 | acDs1ConfigAdminStatus | 0 | 0 | Appian Administrative Status attribute used to set the provisioning state as either activate(1), delete(2) or inactivate(3). Ref… |
1.3.6.1.4.1.2785.2.3.4.1.1.5 | acDs1ConfigOpStatus | 0 | 0 | The operational or actual state of this ds1. |
1.3.6.1.4.1.2785.2.3.4.1.1.6 | acDs1ConfigTimeElapsedInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reas… |
1.3.6.1.4.1.2785.2.3.4.1.1.7 | acDs1ConfigValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
1.3.6.1.4.1.2785.2.3.4.1.1.8 | acDs1ConfigTimeElapsedDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some … |
1.3.6.1.4.1.2785.2.3.4.1.1.9 | acDs1ConfigValidDays | 0 | 0 | The number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online … |
1.3.6.1.4.1.2785.2.3.4.1.1.10 | acDs1ConfigTimeElapsedFarEndInterval | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason… |
1.3.6.1.4.1.2785.2.3.4.1.1.11 | acDs1ConfigValidFarEndIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
1.3.6.1.4.1.2785.2.3.4.1.1.12 | acDs1ConfigTimeElapsedFarEndDay | 0 | 0 | The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some r… |
1.3.6.1.4.1.2785.2.3.4.1.1.13 | acDs1ConfigValidFarEndDays | 0 | 0 | The number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was br… |
1.3.6.1.4.1.2785.2.3.4.1.1.14 | acDs1ConfigLineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
1.3.6.1.4.1.2785.2.3.4.1.1.15 | acDs1ConfigLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
1.3.6.1.4.1.2785.2.3.4.1.1.16 | acDs1ConfigCircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
1.3.6.1.4.1.2785.2.3.4.1.1.17 | acDs1ConfigLoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should ret… |
1.3.6.1.4.1.2785.2.3.4.1.1.19 | acDs1ConfigSignalMode | 0 | 0 | 'none' indicates that no bits are reserved for signaling on this channel. 'message' indicates that Common Chan- nel Signaling is … |
1.3.6.1.4.1.2785.2.3.4.1.1.20 | acDs1ConfigTransmitClockSource | 0 | 0 | The source of Transmit Clock. 'bits' indicates that recovered receive clock through a bits device is used as the transmit clock. 'l… |
1.3.6.1.4.1.2785.2.3.4.1.1.21 | acDs1ConfigFdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appro… |
1.3.6.1.4.1.2785.2.3.4.1.1.22 | acDs1ConfigInvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to acDs1ValidIntervals for which no data is available. This object will typically be… |
1.3.6.1.4.1.2785.2.3.4.1.1.23 | acDs1ConfigInvalidDays | 0 | 0 | The number of days in the range from 0 to acDs1ConfigValidDays for which no data is available. This object will typically be zer… |
1.3.6.1.4.1.2785.2.3.4.1.1.24 | acDs1ConfigInvalidFarEndIntervals | 0 | 0 | The number of intervals in the range from 0 to acDs1ConfigValidFarEndIntervals for which no data is available. This object will … |
1.3.6.1.4.1.2785.2.3.4.1.1.25 | acDs1ConfigInvalidFarEndDays | 0 | 0 | The number of days in the range from 0 to acDs1ConfigValidFarEndDays for which no data is available. This object will typically … |
1.3.6.1.4.1.2785.2.3.4.1.1.26 | acDs1ConfigLineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was ente… |
1.3.6.1.4.1.2785.2.3.4.1.1.27 | acDs1ConfigLineStatusChangeTrapEnable | 0 | 0 | Indicates whether acDs1ConfigLineStatusChange traps should be generated for this interface. |
1.3.6.1.4.1.2785.2.3.4.1.1.28 | acDs1ConfigLoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks establi… |
1.3.6.1.4.1.2785.2.3.4.1.1.29 | acDs1ConfigInterfaceName | 0 | 0 | A user configurable interface name which can be up to 64 bytes in length which uniquely identifies this DS1 interface. |
1.3.6.1.4.1.2785.2.3.4.1.1.30 | acDs1ConfigTimeSlotIndex | 0 | 0 | This index corresponds to the desired timeslot row in the Shared Timeslot Table with a payload type of ds1tdm. |