This object is used to enable and disable the Fibre Channel
subsystem. Configuration of some Fibre Channel objects requires
the Fibre Channel subsystem to be disabled first.
Parsed from file eosn.my.txt
Company: brocade
Module: EOSN-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
bbFcSystemState OBJECT-TYPE SYNTAX BbEnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable and disable the Fibre Channel subsystem. Configuration of some Fibre Channel objects requires the Fibre Channel subsystem to be disabled first." ::= { bbFcGeneral 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.5.1.1.1.0 | bbFcSystemState | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.5.1.1.2 | bbFcSwitchPriority | 1 | 1 | The priority of this FC switch. The role can be always a principal switch, never a principal switch, or don't care. A SET on this… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.3 | bbFcPreferredDomainID | 1 | 1 | The preferred Fibre Channel domain ID of the switch. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.4 | bbFcActiveDomainID | 1 | 1 | The active Fibre Channel domain ID of the switch. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.5 | bbFcAddressDomainID | 1 | 1 | The Fibre Channel address domain ID of the switch. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.6 | bbFcInsistentDomainIdState | 1 | 1 | This object is used to enable/disable insistent domain Id. enabled: performs hard enforcement such that if the switch fails to ob… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.7 | bbFcInteropMode | 1 | 1 | The interop mode of the switch. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.8 | bbFcDeviceProbingState | 1 | 1 | This object enables and disables Fibre Channel device probing. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.9 | bbFcFLogiSequencingState | 1 | 1 | This object is used to enable/disable sequencing fabric login (FLOGI) on all front ports. A SET on this object requires all VF's … |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.10 | bbFcRemoteFabricState | 1 | 1 | This object enables/disables remote fabric. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.11 | bbFcFxPortBbCredit | 1 | 1 | The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. … |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.12 | bbFcFxPortRxBufSize | 1 | 1 | The largest Data_Field Size (in octets) for an FT_1 frame that can be received by any FxPort. A SET on this object requires all V… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.13 | bbFcFxPortRatov | 1 | 1 | The Resource_Allocation_Timeout Value configured for all the FxPorts. It represents E_D_TOV plus twice the maximum time that a f… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.14 | bbFcFxPortEdtov | 1 | 1 | The E_D_TOV value configured for all the FxPorts. The Error_Detect_Timeout Value is used as the timeout value for detecting an er… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.15 | bbFcFxPortPhysRttov | 1 | 1 | The Receiver_Transmitter_Timeout value of any FxPort. This is used by the receiver logic to detect Loss of Synchronization. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.16 | bbFcFxPortFcphVersionHigh | 1 | 1 | The highest or most recent version of FC-PH that the FxPort is configured to support. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.17 | bbFcFxPortFcphVersionLow | 1 | 1 | The lowest or earliest version of FC-PH that the FxPort is configured to support. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.18 | bbFcRerouteDelayState | 1 | 1 | The state in whether to delay in taking a new route during a topology change. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.19 | bbFcDomainRscnState | 1 | 1 | This object allows setting of domain RSCN to enabled or disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.20 | bbFcZoneChangeRscnControlState | 1 | 1 | This object allows the setting of the zone change control state. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.21 | bbFcLimitFabricRscnState | 1 | 1 | The state to indicate whether to limit fabric RSCN. This object is NOT SUPPORTED currently. A SET on this object requires all VF'… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.22 | bbFcDlsEnable | 1 | 1 | This object indicates whether dynamic load sharing is on or not. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.23 | bbFcMinThickPortBbCredit | 1 | 1 | The minimum BbCredit for the thick port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.24 | bbFcMaxThickPortBbCredit | 1 | 1 | The maximum BbCredit for the thick port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.25 | bbFcMinThinPortBbCredit | 1 | 1 | The minimum BbCredit for the thin port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.26 | bbFcMaxThinPortBbCredit | 1 | 1 | The maximum BbCredit for the thin port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.28 | bbFcZoningFlexParsState | 1 | 1 | This object allows you to configure Zoning Flex Pars feature. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.29 | bbCoreSwitchName | 1 | 1 | The Core Switch Name (WWN) of this dynamic partition. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.30 | bbMaxVf | 1 | 1 | The maximum number of Virtual Fabric/ Virtual Switch supported on this partition |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.31 | bbVfMaxDomain | 1 | 1 | The maximum number of Domains supported on this Virtual Fabric. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.32 | bbVfNumber | 1 | 1 | The number of entries in the VF table. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.33 | bbFcMinPortBbCredit | 1 | 1 | The minimum BbCredit for a port. The port can be 1/2/4/10G |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.34 | bbFcMaxPortBbCredit | 1 | 1 | The maximum BbCredit for a port. The port can be 1/2/4/10G |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.40 | bbVf | 1 | 19 | None |