The maximum number of Domains supported on this Virtual Fabric.
Parsed from file eosn.my.txt
Company: brocade
Module: EOSN-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
bbVfMaxDomain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of Domains supported on this Virtual Fabric." ::= { bbFcGeneral 31 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.5.1.1.31.0 | bbVfMaxDomain | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.5.1.1.1 | bbFcSystemState | 1 | 1 | This object is used to enable and disable the Fibre Channel subsystem. Configuration of some Fibre Channel objects requires the F… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.2 | bbFcSwitchPriority | 1 | 1 | The priority of this FC switch. The role can be always a principal switch, never a principal switch, or don't care. A SET on this… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.3 | bbFcPreferredDomainID | 1 | 1 | The preferred Fibre Channel domain ID of the switch. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.4 | bbFcActiveDomainID | 1 | 1 | The active Fibre Channel domain ID of the switch. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.5 | bbFcAddressDomainID | 1 | 1 | The Fibre Channel address domain ID of the switch. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.6 | bbFcInsistentDomainIdState | 1 | 1 | This object is used to enable/disable insistent domain Id. enabled: performs hard enforcement such that if the switch fails to ob… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.7 | bbFcInteropMode | 1 | 1 | The interop mode of the switch. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.8 | bbFcDeviceProbingState | 1 | 1 | This object enables and disables Fibre Channel device probing. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.9 | bbFcFLogiSequencingState | 1 | 1 | This object is used to enable/disable sequencing fabric login (FLOGI) on all front ports. A SET on this object requires all VF's … |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.10 | bbFcRemoteFabricState | 1 | 1 | This object enables/disables remote fabric. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.11 | bbFcFxPortBbCredit | 1 | 1 | The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. … |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.12 | bbFcFxPortRxBufSize | 1 | 1 | The largest Data_Field Size (in octets) for an FT_1 frame that can be received by any FxPort. A SET on this object requires all V… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.13 | bbFcFxPortRatov | 1 | 1 | The Resource_Allocation_Timeout Value configured for all the FxPorts. It represents E_D_TOV plus twice the maximum time that a f… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.14 | bbFcFxPortEdtov | 1 | 1 | The E_D_TOV value configured for all the FxPorts. The Error_Detect_Timeout Value is used as the timeout value for detecting an er… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.15 | bbFcFxPortPhysRttov | 1 | 1 | The Receiver_Transmitter_Timeout value of any FxPort. This is used by the receiver logic to detect Loss of Synchronization. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.16 | bbFcFxPortFcphVersionHigh | 1 | 1 | The highest or most recent version of FC-PH that the FxPort is configured to support. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.17 | bbFcFxPortFcphVersionLow | 1 | 1 | The lowest or earliest version of FC-PH that the FxPort is configured to support. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.18 | bbFcRerouteDelayState | 1 | 1 | The state in whether to delay in taking a new route during a topology change. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.19 | bbFcDomainRscnState | 1 | 1 | This object allows setting of domain RSCN to enabled or disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.20 | bbFcZoneChangeRscnControlState | 1 | 1 | This object allows the setting of the zone change control state. A SET on this object requires all VF's to be disabled. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.21 | bbFcLimitFabricRscnState | 1 | 1 | The state to indicate whether to limit fabric RSCN. This object is NOT SUPPORTED currently. A SET on this object requires all VF'… |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.22 | bbFcDlsEnable | 1 | 1 | This object indicates whether dynamic load sharing is on or not. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.23 | bbFcMinThickPortBbCredit | 1 | 1 | The minimum BbCredit for the thick port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.24 | bbFcMaxThickPortBbCredit | 1 | 1 | The maximum BbCredit for the thick port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.25 | bbFcMinThinPortBbCredit | 1 | 1 | The minimum BbCredit for the thin port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.26 | bbFcMaxThinPortBbCredit | 1 | 1 | The maximum BbCredit for the thin port. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.28 | bbFcZoningFlexParsState | 1 | 1 | This object allows you to configure Zoning Flex Pars feature. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.29 | bbCoreSwitchName | 1 | 1 | The Core Switch Name (WWN) of this dynamic partition. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.30 | bbMaxVf | 1 | 1 | The maximum number of Virtual Fabric/ Virtual Switch supported on this partition |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.32 | bbVfNumber | 1 | 1 | The number of entries in the VF table. |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.33 | bbFcMinPortBbCredit | 1 | 1 | The minimum BbCredit for a port. The port can be 1/2/4/10G |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.34 | bbFcMaxPortBbCredit | 1 | 1 | The maximum BbCredit for a port. The port can be 1/2/4/10G |
1.3.6.1.4.1.289.2.2.3.1.5.1.1.40 | bbVf | 1 | 19 | None |