The port number of the remote switch connected to this port.
Parsed from file eosn.my.txt
Company: brocade
Module: EOSN-MIB
Vendor: Brocade
Module: EOSN-MIB (eosn.my)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
bbFspfPortRemPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the remote switch connected to this port." ::= { bbFspfPortEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.1 | bbFspfPortIndex | 0 | 0 | A number that uniquely identifies this port. It equals the port number + 1. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.2 | bbFspfPortCost | 0 | 0 | The cost of sending a frame over the ISL connected to this port. The value 1000 indicates a 1 Gb/s link. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.3 | bbFspfPortDelay | 0 | 0 | The delay incurred by a frame transmitted on this ISL. A value required by FSPF to be added to LSR's which are flooded. It's val… |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.4 | bbFspfPortLastScnTime | 0 | 0 | The time the last State Change Notification (RSCN) was received to this interface. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.5 | bbFspfPortLastScn | 0 | 0 | The type of the last State Change Notification (RSCN) received on this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.6 | bbFspfPortLastUpTime | 0 | 0 | The last time this port came up. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.7 | bbFspfPortLastDownTime | 0 | 0 | The last time this port went down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.8 | bbFspfPortDownReason | 0 | 0 | The type of State Change Notification (RSCN) that caused the port to go down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.9 | bbFspfPortIfState | 0 | 0 | The current physical state of this port. A port in the down(2) state cannot be used to route traffic to other switches. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.10 | bbFspfPortNbrState | 0 | 0 | The current state of this port relating to its neighbor. This E_Port is used to route traffic to other switches only if the state… |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.11 | bbFspfPortNbrOptions | 0 | 0 | Neighbor capabilities. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.12 | bbFspfPortNbrId | 0 | 0 | The domain ID of the adjacent neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.14 | bbFspfPortNFlags | 0 | 0 | The internal FSPF flags. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.15 | bbFspfPortInactTimeout | 0 | 0 | The inactivity time out value. When this time out expires, the adjacency with the neighbor switch is broken and the new paths are… |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.16 | bbFspfPortHelloTimeout | 0 | 0 | The hello time out value. When this time out expires, a hello frame is sent to the neighbor switch through this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.17 | bbFspfPortRxmtTimeout | 0 | 0 | The retransmission time out value. It is used to transmit topology information to the neighbor switch. If no acknowledgement is … |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.18 | bbFspfPortUpCount | 0 | 0 | The number of times this port came Up with respect to FSPF. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.19 | bbFspfPortDownCount | 0 | 0 | The number of times this port went down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.20 | bbFspfPortNbrInitCount | 0 | 0 | The number of times this neighbor was initialized, without the interface going down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.21 | bbFspfPortCmdAcceptCount | 0 | 0 | The total number of commands accepted from the neighbor switch. Number include Hellos, Link State Updates, and Link State acknowl… |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.22 | bbFspfPortInvCmdCount | 0 | 0 | The number of invalid commands received from the neighbor switch. Usually commands with an FSPF version number higher than the o… |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.23 | bbFspfPortHelloInCount | 0 | 0 | The number of Hello frames received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.24 | bbFspfPortInvHelloCount | 0 | 0 | The number of invalid hello frames (with invalid parameters) received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.25 | bbFspfPortLsuInCount | 0 | 0 | The number of LSUs received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.26 | bbFspfPortLsaInCount | 0 | 0 | The number of LSAs received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.27 | bbFspfPortHelloOutCount | 0 | 0 | The number of Hello frames transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.28 | bbFspfPortAttemptHelloOutCount | 0 | 0 | The number of attempted transmissions of Hello frames to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.29 | bbFspfPortAttemptLsuOutCount | 0 | 0 | The number of attempted transmissions of LSUs to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.30 | bbFspfPortLsuOutCount | 0 | 0 | The number of LSUs transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.31 | bbFspfPortLsaOutCount | 0 | 0 | The number of LSAs transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.32 | bbFspfPortAttemptLsaOutCount | 0 | 0 | The number of attempted transmissions of LSAs to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.15.1.33 | bbFspfPortCommand | 0 | 0 | This object is used to issue an FSPF port command. Setting it to 'none' has no effect, and when it is retrieved the value will al… |