The inactivity time out value. When this time out expires,
the adjacency with the neighbor switch is broken and the
new paths are computed to all possible destination switches
in the fabric.
Parsed from file eosn.my.txt
Company: brocade
Module: EOSN-MIB
Vendor: Brocade
Module: EOSN-MIB (eosn.my)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
bbVfFspfPortInactTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The inactivity time out value. When this time out expires, the adjacency with the neighbor switch is broken and the new paths are computed to all possible destination switches in the fabric." ::= { bbVfFspfPortEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.1 | bbVfFspfPortIndex | 0 | 0 | A number that uniquely identifies this port. It equals the port number + 1. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.2 | bbVfFspfPortCost | 0 | 0 | The cost of sending a frame over the ISL connected to this port. The value 1000 indicates a 1 Gb/s link. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.3 | bbVfFspfPortDelay | 0 | 0 | The delay incurred by a frame transmitted on this ISL. A value required by FSPF to be added to LSR's which are flooded. It's val… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.4 | bbVfFspfPortLastScnTime | 0 | 0 | The time the last State Change Notification (RSCN) was received to this interface. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.5 | bbVfFspfPortLastScn | 0 | 0 | The type of the last State Change Notification (RSCN) received on this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.6 | bbVfFspfPortLastUpTime | 0 | 0 | The last time this port came up. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.7 | bbVfFspfPortLastDownTime | 0 | 0 | The last time this port went down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.8 | bbVfFspfPortDownReason | 0 | 0 | The type of State Change Notification (RSCN) that caused the port to go down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.9 | bbVfFspfPortIfState | 0 | 0 | The current physical state of this port. A port in the down(2) state cannot be used to route traffic to other switches. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.10 | bbVfFspfPortNbrState | 0 | 0 | The current state of this port relating to its neighbor. This E_Port is used to route traffic to other switches only if the state… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.11 | bbVfFspfPortNbrOptions | 0 | 0 | Neighbor capabilities. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.12 | bbVfFspfPortNbrId | 0 | 0 | The domain ID of the adjacent neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.13 | bbVfFspfPortRemPort | 0 | 0 | The port number of the remote switch connected to this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.14 | bbVfFspfPortNFlags | 0 | 0 | The internal FSPF flags. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.16 | bbVfFspfPortHelloTimeout | 0 | 0 | The hello time out value. When this time out expires, a hello frame is sent to the neighbor switch through this port. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.17 | bbVfFspfPortRxmtTimeout | 0 | 0 | The retransmission time out value. It is used to transmit topology information to the neighbor switch. If no acknowledgement is … |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.18 | bbVfFspfPortUpCount | 0 | 0 | The number of times this port came Up with respect to FSPF. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.19 | bbVfFspfPortDownCount | 0 | 0 | The number of times this port went down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.20 | bbVfFspfPortNbrInitCount | 0 | 0 | The number of times this neighbor was initialized, without the interface going down. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.21 | bbVfFspfPortCmdAcceptCount | 0 | 0 | The total number of commands accepted from the neighbor switch. Number include Hellos, Link State Updates, and Link State acknowl… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.22 | bbVfFspfPortInvCmdCount | 0 | 0 | The number of invalid commands received from the neighbor switch. Usually commands with an FSPF version number higher than the o… |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.23 | bbVfFspfPortHelloInCount | 0 | 0 | The number of Hello frames received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.24 | bbVfFspfPortInvHelloCount | 0 | 0 | The number of invalid hello frames (with invalid parameters) received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.25 | bbVfFspfPortLsuInCount | 0 | 0 | The number of LSUs received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.26 | bbVfFspfPortLsaInCount | 0 | 0 | The number of LSAs received from the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.27 | bbVfFspfPortHelloOutCount | 0 | 0 | The number of Hello frames transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.28 | bbVfFspfPortAttemptHelloOutCount | 0 | 0 | The number of attempted transmissions of Hello frames to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.29 | bbVfFspfPortAttemptLsuOutCount | 0 | 0 | The number of attempted transmissions of LSUs to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.30 | bbVfFspfPortLsuOutCount | 0 | 0 | The number of LSUs transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.31 | bbVfFspfPortLsaOutCount | 0 | 0 | The number of LSAs transmitted to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.32 | bbVfFspfPortAttemptLsaOutCount | 0 | 0 | The number of attempted transmissions of LSAs to the neighbor switch. |
1.3.6.1.4.1.289.2.2.3.1.6.2.29.1.33 | bbVfFspfPortCommand | 0 | 0 | This object is used to issue an FSPF port command. Setting it to 'none' has no effect, and when it is retrieved the value will al… |