Vendor: Asante Technology
Module: ASANTE-SWITCH-MIB
[Automatically extracted from oidview.com]
eSWAgentSW OBJECT IDENTIFIER ::= { eSWAgent 1 }
eSWAgentSW OBJECT IDENTIFIER ::= { eSWAgent 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.298.1.5.1.1.1.1 | eSWUpDownloadAction | 1 | 1 | Agent upload/download action. May refer to the configuration file or image file. The upload action is valid only for the configur… |
1.3.6.1.4.1.298.1.5.1.1.1.2 | eSWUpDownloadStatus | 1 | 1 | Result of the last upload/download request by this agent. |
1.3.6.1.4.1.298.1.5.1.1.1.3 | eSWRemoteDownloadFile | 1 | 1 | Downloading what kind of file. The configuration file name should be stored in the agentRemoteBootFile MIB object, and the image … |
1.3.6.1.4.1.298.1.5.1.1.1.4 | eSWRemoteConfigServer | 1 | 1 | The IP address of the configuration file server. |
1.3.6.1.4.1.298.1.5.1.1.1.5 | eSWRemoteConfigFileName | 1 | 1 | The name of switch configuration file. The server's IP address is in eSWRemoteConfigServer. |
1.3.6.1.4.1.298.1.5.1.1.1.6 | eSWConfigRetryCounter | 1 | 1 | The number of times the agent will retry a failed image file download. |
1.3.6.1.4.1.298.1.5.1.1.1.7 | eSWRemoteImageServer | 1 | 1 | The IP address of the image file server. |
1.3.6.1.4.1.298.1.5.1.1.1.8 | eSWRemoteImageFileName | 1 | 1 | The name of the switch image file. |
1.3.6.1.4.1.298.1.5.1.1.1.9 | eSWImageRetryCounter | 1 | 1 | The number of times the agent will retry a failed configuration file download. |
1.3.6.1.4.1.298.1.5.1.1.1.10 | eSWActiveImageBank | 1 | 1 | The image bank from which runtime code will be loaded at next boot. If the value is set to other(1) the agent will boot from the … |
1.3.6.1.4.1.298.1.5.1.1.1.11 | eSWRemoteDownloadImageBank | 1 | 1 | The number of the destination bank to which the image will be downloaded. 'other' will be recognized as the default bank, i.e. ba… |
1.3.6.1.4.1.298.1.5.1.1.1.12 | eSWResetWaitTime | 1 | 1 | The time to wait before executing a reset of the agent. The time is in seconds, with a range of 1 second to 1 day. |
1.3.6.1.4.1.298.1.5.1.1.1.13 | eSWResetLeftTime | 1 | 1 | Time left until the agent will reset. If a reset request is not in progress, this should have a value of 0. |
1.3.6.1.4.1.298.1.5.1.1.1.14 | eSWBankImageInfoTable | 1 | 5 | A table of information about the switch's image banks. |
1.3.6.1.4.1.298.1.5.1.1.1.15 | eSWTelnetSessions | 1 | 1 | Number of concurrent Telnet sessions the agent will support. |
1.3.6.1.4.1.298.1.5.1.1.1.16 | eSWTelnetSessionActive | 1 | 1 | Number of Telnet sessions active. This value cannot be greater than the value of eSWTelnetSessions. |
1.3.6.1.4.1.298.1.5.1.1.1.17 | eSWTelnetTimeOut | 1 | 1 | Telnet session time-out value, in minutes. The default for this object is 5 minutes. |
1.3.6.1.4.1.298.1.5.1.1.1.18 | eSWSTP | 1 | 1 | Setting this value to enable(2) will cause the switch to perform the Spanning Tree Algorithm as described in IEEE 802.1d.Setting … |
1.3.6.1.4.1.298.1.5.1.1.1.19 | eSWUserInterfaceTimeOut | 1 | 1 | The console interface time-out value, in minutes. A value of 0 means that the console interface will not time out. The default is… |
1.3.6.1.4.1.298.1.5.1.1.1.20 | eSWBCastMcastThreshold | 1 | 1 | The switch will detect a Broadcast or Multicast storm on the network based on the value of this object. This value is represente… |
1.3.6.1.4.1.298.1.5.1.1.1.21 | eSWBCastMcastDuration | 1 | 1 | The switch will detect a Broadcast or Multicast storm on the network based on the value represented by this object. The switch wil… |
1.3.6.1.4.1.298.1.5.1.1.1.22 | eSWCfgFileErrStatus | 1 | 1 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.298.1.5.1.1.2 | eSWAgentHW | 3 | 6 | None |
1.3.6.1.4.1.298.1.5.1.1.3 | eSWAgentFW | 0 | 0 | None |