This object is used to enable greater security for
implementation that use global VC label space. In
conservative mode, inbound packets with a VC label
are accepted only from tunnels that are associated to the
same VC via the inbound tunnel table. The entries in the
inbound tunnel table are either explicitly configured or
implicitly known by the control protocol used for VC
set-up.
If such association is not known, not configured or not
desired, liberal mode should be configured, and the node
should accept the packet based on the VC label only
regardless of the outer tunnel used to carry the VC.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object is used to enable greater security for
implementation that use global VC label space. In
conservative mode, inbound packets with a VC label
are accepted only from tunnels that are associated to the
same VC via the inbound tunnel table. The entries in the
inbound tunnel table are either explicitly configured or
implicitly known by the control protocol used for VC
set-up.
If such association is not known, not configured or not
desired, liberal mode should be configured, and the node
should accept the packet based on the VC label only
regardless of the outer tunnel used to carry the VC.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: CoSine Communication
Module: COSINE-ORION-MIB (orion_mib_v31)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
csPwVcInboundMode OBJECT-TYPE SYNTAX INTEGER { liberal (1), conservative (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable greater security for implementation that use global VC label space. In conservative mode, inbound packets with a VC label are accepted only from tunnels that are associated to the same VC via the inbound tunnel table. The entries in the inbound tunnel table are either explicitly configured or implicitly known by the control protocol used for VC set-up. If such association is not known, not configured or not desired, liberal mode should be configured, and the node should accept the packet based on the VC label only regardless of the outer tunnel used to carry the VC." DEFVAL { liberal } ::= { csPwVcEntry 11 }
csPwVcInboundMode OBJECT-TYPE SYNTAX INTEGER { liberal (1), conservative (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable greater security for implementation that use global VC label space. In conservative mode, inbound packets with a VC label are accepted only from tunnels that are associated to the same VC via the inbound tunnel table. The entries in the inbound tunnel table are either explicitly configured or implicitly known by the control protocol used for VC set-up. If such association is not known, not configured or not desired, liberal mode should be configured, and the node should accept the packet based on the VC label only regardless of the outer tunnel used to carry the VC." DEFVAL { liberal } ::= { csPwVcEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.1 | csPwVcIndex | 0 | 0 | Primary index for the conceptual row identifying a VC (or set of VCs) within this PW Emulation VC table. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.2 | csPwVcID | 0 | 0 | Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.3 | csPwVcOutboundGroupID | 0 | 0 | Used in the outbound Group ID field within the 'Virtual Circuit FEC Element' when some control methods (for example LDP) is used … |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.4 | csPwVcInboundGroupID | 0 | 0 | Obtained from the inbound Group ID field in the remote 'Virtual Circuit FEC Element' as received by control methods are used for … |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.5 | csPwVcInboundMTU | 0 | 0 | MTU of the interface at the remote PE. 0 means assume same as outbound MTU |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.6 | csPwVcPeerAddrType | 0 | 0 | Denotes the address type of the peer node signaling address if PW signaling is used for the VC creation. It should be set to 'not… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.7 | csPwVcPeerIpv4Addr | 0 | 0 | If csPwVcPeerAddrType is set to ipV4(1), then this value will contain the IPv4 address of the peer node PW/PE signaling entity. T… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.8 | csPwVcPeerIpv6Addr | 0 | 0 | If csPwVcPeerAddrType is set to ipV6(2), then this value will contain the Ipv6 address of the peer node PW/PE signaling entity. T… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.9 | csPwVcOutboundVcLabel | 0 | 0 | The VC label used in the outbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples:… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.10 | csPwVcInboundVcLabel | 0 | 0 | The VC label used in the inbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: … |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.12 | csPwVcName | 0 | 0 | The canonical name assigned to the VC. This name can be used to refer to the VC on the node console port. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.13 | csPwVcDescr | 0 | 0 | A textual string containing information about the VC. If there is no description this object contains a zero length string. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.14 | csPwVcCreateTime | 0 | 0 | System time when this VC was created. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.15 | csPwVcUpTime | 0 | 0 | Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in csPwVcOperStatus.) |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.16 | csPwVcType | 0 | 0 | This value dictates what service-specific tables are indexed by csPwVcIndex and csPwVcInstance. For example, if set for 'cem' csP… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.17 | csPwVcOwner | 0 | 0 | Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no s… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.18 | csPwVcPsnType | 0 | 0 | Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entri… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.19 | csPwVcPriority | 0 | 0 | This object define the relative priority of the VC instance in a lowest-to-highest fashion. VC instances with the same priority a… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.20 | csPwVcAdminStatus | 0 | 0 | The desired operational status of this VC. It is set by the operator if csPwVcIsIf is set to false. Otherwise, it reflects the if… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.21 | csPwVcOperStatus | 0 | 0 | Indicates the actual combined operational status of this VC. It is 'up' if both csPwVcInboundOperStatus and csPwVcOutboundOperSta… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.22 | csPwVcInboundOperStatus | 0 | 0 | Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finis… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.23 | csPwVcOutboundOperStatus | 0 | 0 | Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finish… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.24 | csPwVcRowStatus | 0 | 0 | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.25 | csPwVcStorageType | 0 | 0 | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.26 | csPwVcCeIntf | 0 | 0 | This object is used to identify the CE interface. This format allows for many formats. We only support LI for now. The format use… |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.27 | csPwVcForwardSlot | 0 | 0 | Slot number of the data forwarding processor engine. 0 means not set. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.28 | csPwVcForwardPE | 0 | 0 | Processor engine number of the data forwarding processor engine. 0 means not set. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.29 | csPwVcCtrlWord | 0 | 0 | Include and except control word in the data packets. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.30 | csPwVcSeqNumber | 0 | 0 | Include and check the sequence numbers. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.31 | csPwVcTestResult | 0 | 0 | The result of the previous testing request. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.32 | csPwVcVlanId | 0 | 0 | The result of the previous testing request. Note: A valid VLAN ID should be provided if Connected to a BI. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.33 | csPwVcCustomerId | 0 | 0 | Customer ID field. |
| 1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.34 | csPwVcCustomerName | 0 | 0 | Customer name field. |