Setting this object to 'reset' will
cause the Hub1 to perform a hardware
reset within approximately 5 seconds.
Setting this object to 'no-reset will
have no effect. The value 'no-reset
will be returned whenever this object
is retrieved.
The primary purpose for including this
variable in the Hub1 MIB is to allow
SNMP managers to modify the operational
mode of the Hub1. Changing the variable
hub1BridgingMode has no effect on the
Hub until the Hub is reset.
Parsed from file NRC_mib.txt
Company: None
Module: NRC-MultiGate
Setting this object to 'reset' will
cause the Hub1 to perform a hardware
reset within approximately 5 seconds.
Setting this object to 'no-reset will
have no effect. The value 'no-reset
will be returned whenever this object
is retrieved.
The primary purpose for including this
variable in the Hub1 MIB is to allow
SNMP managers to modify the operational
mode of the Hub1. Changing the variable
hub1BridgingMode has no effect on the
Hub until the Hub is reset.
Parsed from file NRC-MultiGate.mib
Module: NRC-MultiGate
Vendor: Network Resources Corporation
Module: NRC-HUB1-MIB
[Automatically extracted from oidview.com]
hub1Reset OBJECT-TYPE SYNTAX INTEGER { no-reset (1), reset (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object to 'no-reset will have no effect. The value 'no-reset will be returned whenever this object is retrieved. The primary purpose for including this variable in the Hub1 MIB is to allow SNMP managers to modify the operational mode of the Hub1. Changing the variable hub1BridgingMode has no effect on the Hub until the Hub is reset." ::= { hub1 13 }
hub1Reset OBJECT-TYPE SYNTAX INTEGER { no-reset (1), reset (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object to 'no-reset will have no effect. The value 'no-reset will be returned whenever this object is retrieved. The primary purpose for including this variable in the Hub1 MIB is to allow SNMP managers to modify the operational mode of the Hub1. Changing the variable hub1BridgingMode has no effect on the Hub until the Hub is reset." ::= { hub1 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.315.1.13.0 | hub1Reset | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.315.1.1 | hub1AutoPartition | 1 | 1 | The value 'enabled' indicates that the HUB should auto partition ports. The value 'disabled' will disable this feature. |
1.3.6.1.4.1.315.1.2 | hub1ReconnectOnTransmission | 1 | 1 | None |
1.3.6.1.4.1.315.1.3 | hub1IncludeOutOfWinColl | 1 | 1 | None |
1.3.6.1.4.1.315.1.4 | hub1LoopbackPartition | 1 | 1 | None |
1.3.6.1.4.1.315.1.5 | hub1CollisionLimit | 1 | 1 | If consecutive collisions exceeding the value of this variable are detected on a port, the port will be auto partitioned 31 is the… |
1.3.6.1.4.1.315.1.6 | hub1CarrierRecoverTime | 1 | 1 | None |
1.3.6.1.4.1.315.1.7 | hub1EventCounterFlags | 1 | 1 | None |
1.3.6.1.4.1.315.1.8 | hub1EventRecordFlags | 1 | 1 | A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detec… |
1.3.6.1.4.1.315.1.9 | hub1BridgingMode | 1 | 1 | Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables… |
1.3.6.1.4.1.315.1.10 | hub1ProtocolFilterMode | 1 | 1 | None |
1.3.6.1.4.1.315.1.11 | hub1FilterProtocols | 1 | 1 | Protocol types to be filtered or passed by the bridging logic. This is a variable length array of between 0 and 16 2-byte entries… |
1.3.6.1.4.1.315.1.12 | hub1ConsoleBaudRate | 1 | 1 | The baud rate of the console port. Legal values are 9600, 4800, 2400, and 1200. |
1.3.6.1.4.1.315.1.14 | hub1SoftwareVersion | 1 | 1 | The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cau… |
1.3.6.1.4.1.315.1.15 | hub1PortTable | 1 | 11 | A table of port specific information for the NRC HUB 1 product. This table supplements the Repeater MIB Ports Table. |
1.3.6.1.4.1.315.1.16 | hub1IFTable | 1 | 14 | A table that contains HUB 1 specific supplements to the MIB-II interfaces table. |
1.3.6.1.4.1.315.1.17 | hub1LastFailureReason | 1 | 1 | None |