A bit mask indicating which error types
will cause corresponding bits in
hub1PortEventRecordValue to be set when
an error is detected.
Each bit has the following significance
where bits are listed from most
significant bit to least significant bit.
bit
8 Bad Link Enable
7 Partition Enable
6 Out Of Window Collision Enable
5 Pygmy Packet Enable
4 Non SFD Enable
3 Phase Lock Error Enable
2 Elasticity Buffer Error Enable
1 Jabber Enable
When a particular bit is set, all ports
will start to log the specified error in
the hub1PortEventRecordValue column of the
port's row of the hub1PortTable.
For example, if bit 1 (Jabber Enable) is
set, then for every port, a detected
Jabber Error would cause bit 1 of
hub1PortEventRecordValue to be set.
When setting the value of this variable,
the entire bit mask must be specified.
When this mask is set, hub1PortRecordValue
for all ports is cleared.
Parsed from file NRC_mib.txt
Company: None
Module: NRC-MultiGate
A bit mask indicating which error types
will cause corresponding bits in
hub1PortEventRecordValue to be set when
an error is detected.
Each bit has the following significance
where bits are listed from most
significant bit to least significant bit.
bit
8 Bad Link Enable
7 Partition Enable
6 Out Of Window Collision Enable
5 Pygmy Packet Enable
4 Non SFD Enable
3 Phase Lock Error Enable
2 Elasticity Buffer Error Enable
1 Jabber Enable
When a particular bit is set, all ports
will start to log the specified error in
the hub1PortEventRecordValue column of the
port's row of the hub1PortTable.
For example, if bit 1 (Jabber Enable) is
set, then for every port, a detected
Jabber Error would cause bit 1 of
hub1PortEventRecordValue to be set.
When setting the value of this variable,
the entire bit mask must be specified.
When this mask is set, hub1PortRecordValue
for all ports is cleared.
Parsed from file NRC-MultiGate.mib
Module: NRC-MultiGate
Vendor: Network Resources Corporation
Module: NRC-HUB1-MIB
[Automatically extracted from oidview.com]
hub1EventRecordFlags OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detected. Each bit has the following significance where bits are listed from most significant bit to least significant bit. bit 8 Bad Link Enable 7 Partition Enable 6 Out Of Window Collision Enable 5 Pygmy Packet Enable 4 Non SFD Enable 3 Phase Lock Error Enable 2 Elasticity Buffer Error Enable 1 Jabber Enable When a particular bit is set, all ports will start to log the specified error in the hub1PortEventRecordValue column of the port's row of the hub1PortTable. For example, if bit 1 (Jabber Enable) is set, then for every port, a detected Jabber Error would cause bit 1 of hub1PortEventRecordValue to be set. When setting the value of this variable, the entire bit mask must be specified. When this mask is set, hub1PortRecordValue for all ports is cleared." ::= { hub1 8 }
hub1EventRecordFlags OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detected. Each bit has the following significance where bits are listed from most significant bit to least significant bit. bit 8 Bad Link Enable 7 Partition Enable 6 Out Of Window Collision Enable 5 Pygmy Packet Enable 4 Non SFD Enable 3 Phase Lock Error Enable 2 Elasticity Buffer Error Enable 1 Jabber Enable When a particular bit is set, all ports will start to log the specified error in the hub1PortEventRecordValue column of the port's row of the hub1PortTable. For example, if bit 1 (Jabber Enable) is set, then for every port, a detected Jabber Error would cause bit 1 of hub1PortEventRecordValue to be set. When setting the value of this variable, the entire bit mask must be specified. When this mask is set, hub1PortRecordValue for all ports is cleared." ::= { hub1 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.315.1.8.0 | hub1EventRecordFlags | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.315.1.1 | hub1AutoPartition | 1 | 1 | The value 'enabled' indicates that the HUB should auto partition ports. The value 'disabled' will disable this feature. |
| 1.3.6.1.4.1.315.1.2 | hub1ReconnectOnTransmission | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.3 | hub1IncludeOutOfWinColl | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.4 | hub1LoopbackPartition | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.5 | hub1CollisionLimit | 1 | 1 | If consecutive collisions exceeding the value of this variable are detected on a port, the port will be auto partitioned 31 is the… |
| 1.3.6.1.4.1.315.1.6 | hub1CarrierRecoverTime | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.7 | hub1EventCounterFlags | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.9 | hub1BridgingMode | 1 | 1 | Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables… |
| 1.3.6.1.4.1.315.1.10 | hub1ProtocolFilterMode | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.11 | hub1FilterProtocols | 1 | 1 | Protocol types to be filtered or passed by the bridging logic. This is a variable length array of between 0 and 16 2-byte entries… |
| 1.3.6.1.4.1.315.1.12 | hub1ConsoleBaudRate | 1 | 1 | The baud rate of the console port. Legal values are 9600, 4800, 2400, and 1200. |
| 1.3.6.1.4.1.315.1.13 | hub1Reset | 1 | 1 | Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object… |
| 1.3.6.1.4.1.315.1.14 | hub1SoftwareVersion | 1 | 1 | The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cau… |
| 1.3.6.1.4.1.315.1.15 | hub1PortTable | 1 | 11 | A table of port specific information for the NRC HUB 1 product. This table supplements the Repeater MIB Ports Table. |
| 1.3.6.1.4.1.315.1.16 | hub1IFTable | 1 | 14 | A table that contains HUB 1 specific supplements to the MIB-II interfaces table. |
| 1.3.6.1.4.1.315.1.17 | hub1LastFailureReason | 1 | 1 | None |