When this object is set to convertToStatic(2), all addresses
learned on this port will be added to the non-volatile version
of the static address table.
Typically, this object will be used to perform a crude form of
address database update where the address activity associated
with this port is collected as static (i.e. permanent) addresses
while the value of this object is set to convertToStatic(2).
Following this usually short period of time (perhaps a week of
activity), the value of this object is restored back to its
default value of learnAsDynamic(1) and learning for this port is
disabled.
It is important that the user verify the address database to
verify that only the desired addresses were made permanent.
Parsed from file IntelMib.txt
Company: None
Module: EXPRESSGS-MIB
When this object is set to convertToStatic(2), all addresses
learned on this port will be added to the non-volatile version
of the static address table.
Typically, this object will be used to perform a crude form of
address database update where the address activity associated
with this port is collected as static (i.e. permanent) addresses
while the value of this object is set to convertToStatic(2).
Following this usually short period of time (perhaps a week of
activity), the value of this object is restored back to its
default value of learnAsDynamic(1) and learning for this port is
disabled.
It is important that the user verify the address database to
verify that only the desired addresses were made permanent.
Parsed from file EXPRESSGS-MIB.mib
Module: EXPRESSGS-MIB
Vendor: Intel Corporation
Module: EXPRESSGS-MIB
[Automatically extracted from oidview.com]
expressGSSwitchPortConvertToStatic OBJECT-TYPE SYNTAX INTEGER { learnAsDynamic(1), convertToStatic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of the static address table. Typically, this object will be used to perform a crude form of address database update where the address activity associated with this port is collected as static (i.e. permanent) addresses while the value of this object is set to convertToStatic(2). Following this usually short period of time (perhaps a week of activity), the value of this object is restored back to its default value of learnAsDynamic(1) and learning for this port is disabled. It is important that the user verify the address database to verify that only the desired addresses were made permanent." ::= { expressGSSwitchPortEntry 3 }
expressGSSwitchPortConvertToStatic OBJECT-TYPE SYNTAX INTEGER { learnAsDynamic(1), convertToStatic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of the static address table. Typically, this object will be used to perform a crude form of address database update where the address activity associated with this port is collected as static (i.e. permanent) addresses while the value of this object is set to convertToStatic(2). Following this usually short period of time (perhaps a week of activity), the value of this object is restored back to its default value of learnAsDynamic(1) and learning for this port is disabled. It is important that the user verify the address database to verify that only the desired addresses were made permanent." ::= { expressGSSwitchPortEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.6.13.5.2.1.1.1 | expressGSSwitchPortIndex | 0 | 0 | A unique index that identifies this switch port. The value of this index corresponds to the value of the expressGSResourceIndex… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.2 | expressGSSwitchPortSTAPMode | 0 | 0 | Disabling spanning tree on a switch port prevents the switch port from participating in the spanning tree process. When disabled… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.4 | expressGSSwitchPortLearningMode | 0 | 0 | Disable learning on a bridge port to prevent new addresses from being added to the address database. Used in combination with st… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.5 | expressGSSwitchPortHuntGroup | 0 | 0 | Hunt groups provide the capability to logically bind multiple switch ports into one switch port. This provides a way of balancin… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.6 | expressGSSwitchPortPhysicalPort | 0 | 0 | The physical port resource bound to this switch port. |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.7 | expressGSSwitchPortKnownMode | 0 | 0 | Enabling known mode for this switch port causes the port to safely discard frames flooded because they are unknown unicast frames… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.8 | expressGSSwitchPortMappingMethod | 0 | 0 | The frame mapping method of this switch port. When set to port-based(1) (the factory default), all non-tagged frames are classif… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.9 | expressGSSwitchPortTrunkingMode | 0 | 0 | The trunking mode of this port. All frames transmitted out this switch port are translated to the appropriate trunking format: Cl… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.10 | expressGSSwitchPortVlanBindingMethod | 0 | 0 | The VLAN binding method of a switch port specifies the way in which the port can be a member of the egress lists of VLANs other t… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.11 | expressGSSwitchPortIgnoreTag | 0 | 0 | Each switch port is capable of ignoring the VLAN Tag associated with a frame in a trunking format. When ignored, the tag is used… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.12 | expressGSSwitchPortVlanID | 0 | 0 | When this switch port is configured in port-based VLAN mode, all non-tagged frames received on this port are bound to this VLAN. … |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.13 | expressGSSwitchPort3ComMappingTableIndex | 0 | 0 | The 3Com VLAN mapping table associated with this switch port. The default is 1, which indicates the default mapping table. |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.14 | expressGSSwitchPortAutoVlanCreation | 0 | 0 | Enabling auto VLAN creation for this switch port causes the port to dynamically create a VLAN whenever an IEEE 802.1Q or Multi-le… |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.15 | expressGSSwitchPortMirrorMode | 0 | 0 | When set to enable(1), this object indicates that the port is defined as a mirror port through the expressGSPortMirroringTable. … |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.16 | expressGSSwitchPortIfIndex | 1 | 1 | Each switch port is associated with an interface. This object provides a mechanism to map switch ports to bridge ports. |
| 1.3.6.1.4.1.343.6.13.5.2.1.1.17 | expressGSSwitchPortFastStart | 1 | 1 | When this object is set to enable(1), bridge ports on this switch port transitions right from blocking to forwarding, skipping t… |