The flag indicating whether the IPX should send unsolicited
LMI update messages as they appear or wait for the polling
from the user device. This object is applicable to only
Annex A/D UNI and Annex A/D NNI protocols for write and
LMI, Annex A/D UNI and Annex A/D NNI for read.
- Get Operation:
This object is always NO for ports without protocols;
otherwise, its value is determined by the asynchronous
status of the port.
- Set Operation:
If the network manager attempts to SET this object of a port
with none or LMI protocol, an error is reported.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
frLportAsynStatus OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The flag indicating whether the IPX should send unsolicited LMI update messages as they appear or wait for the polling from the user device. This object is applicable to only Annex A/D UNI and Annex A/D NNI protocols for write and LMI, Annex A/D UNI and Annex A/D NNI for read. - Get Operation: This object is always NO for ports without protocols; otherwise, its value is determined by the asynchronous status of the port. - Set Operation: If the network manager attempts to SET this object of a port with none or LMI protocol, an error is reported." ::= { frLportCnfEntry 19 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.100.4.2.1.1.1.1 | frLportSlotIndex | 0 | 0 | The slot number |
1.3.6.1.4.1.351.100.4.2.1.1.1.2 | frLportPortIndex | 0 | 0 | The port number |
1.3.6.1.4.1.351.100.4.2.1.1.1.3 | frLportPortDLCI | 0 | 0 | Port DLCI for Frame Forwarding (FRI subrate interface only). - Get Operation: If the network manager attempts to GET this object … |
1.3.6.1.4.1.351.100.4.2.1.1.1.4 | frLportAdminStatus | 0 | 0 | User requested state for logical port table row. A user may up, down, configure, add and delete a FR Logical port. |
1.3.6.1.4.1.351.100.4.2.1.1.1.5 | frLportOperStatus | 0 | 0 | Actual state of the logical port. |
1.3.6.1.4.1.351.100.4.2.1.1.1.6 | frLportPortSpeed | 0 | 0 | The baud rate of the port. For FRI T1/E1 interface, this object is determined when this port is added by the number of channels a… |
1.3.6.1.4.1.351.100.4.2.1.1.1.7 | frLportClockType | 0 | 0 | The type of port clock (FRI subrate interface only). For T1/E1 interface this object should be none. - Get Operation: If the netwo… |
1.3.6.1.4.1.351.100.4.2.1.1.1.8 | frLportPortType | 0 | 0 | The type of FRP subrate port. This object is not used in switch software release 8.1 It is retained for historical reasons, and p… |
1.3.6.1.4.1.351.100.4.2.1.1.1.9 | frLportVcCount | 0 | 0 | The number of virtual connections that terminate on this port. Note that there can be up to 252 connections per FRP cards shared … |
1.3.6.1.4.1.351.100.4.2.1.1.1.10 | frLportFirstVcPtr | 0 | 0 | The object identifier denoting the first endpoint associated with this port. For current implementation, this OID points to the … |
1.3.6.1.4.1.351.100.4.2.1.1.1.11 | frLportAggrChCnt | 0 | 0 | The number of aggregate channels assigned to this logical port (FRI T1/E1 interface only) when the port is added. For subrate por… |
1.3.6.1.4.1.351.100.4.2.1.1.1.12 | frLportChSpeed | 0 | 0 | The channel speed (FRI T1/E1 interface only). For FRI subrate interface this object should be set as na. |
1.3.6.1.4.1.351.100.4.2.1.1.1.13 | frLportMaxTxQDepth | 0 | 0 | The maximum bytes queued for transmission from the FRP port |
1.3.6.1.4.1.351.100.4.2.1.1.1.14 | frLportECNQThresh | 0 | 0 | Port explicit congestion notification threshold. This is the point at which the BECN and FECN bits will be set in the communicati… |
1.3.6.1.4.1.351.100.4.2.1.1.1.15 | frLportDEThresh | 0 | 0 | The percentage of the queue depth above which frames with the Discard Eligibility bit set will be discarded. An entry of 100% eff… |
1.3.6.1.4.1.351.100.4.2.1.1.1.16 | frLportIDEMap | 0 | 0 | The flag indicating whether IDE to DE mapping should be performed. |
1.3.6.1.4.1.351.100.4.2.1.1.1.17 | frLportSigProt | 0 | 0 | The specified LMI operation mode. The options can be 1 - (UNI)LMI disabled 2 - (UNI)LMI and asynchronous update enabled 3 - (UNI)L… |
1.3.6.1.4.1.351.100.4.2.1.1.1.18 | frLportNNIStatus | 0 | 0 | The flag indicating whether NNI is active on the specified slot.port. - Get Operation only: This object is always NO if the networ… |
1.3.6.1.4.1.351.100.4.2.1.1.1.20 | frLportPolVerTmr | 0 | 0 | The link integrity verification timer heartbeat (keep-alive) period. It should be set to 5 seconds more than the heartbeat time i… |
1.3.6.1.4.1.351.100.4.2.1.1.1.21 | frLportErrThresh | 0 | 0 | The number of the failures in the monitored events that cause the keep-alive process to report an alarm. - Get Operation: Since th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.22 | frLportMonEveCnt | 0 | 0 | The number of monitored events for the keep-alive process. A port communication fail condition is cleared after this number of su… |
1.3.6.1.4.1.351.100.4.2.1.1.1.23 | frLportCommPri | 0 | 0 | The flag specifying if the connection SNA priority should be communicated to the user device attached to the port. - Get Operatio… |
1.3.6.1.4.1.351.100.4.2.1.1.1.24 | frLportUpRNR | 0 | 0 | The upper Receiver-Not-Ready threshold. This threshold specifies the number of receiver not ready indications from the user equip… |
1.3.6.1.4.1.351.100.4.2.1.1.1.25 | frLportLowRNR | 0 | 0 | The Lower Receiver-Not-Ready threshold. This threshold specifies the number of receiver not ready indications from the user equip… |
1.3.6.1.4.1.351.100.4.2.1.1.1.26 | frLportMinFrmFlgs | 0 | 0 | The minimum number of flags between frames. All values in the range 1 to 255 are valid and the default is 1. |
1.3.6.1.4.1.351.100.4.2.1.1.1.27 | frLportOamThresh | 0 | 0 | The alarm threshold for number of OAM heartbeat FastPackets missed before propagating A-bit=0. This threshold is applicable to bo… |
1.3.6.1.4.1.351.100.4.2.1.1.1.28 | frLportLinkTimer | 0 | 0 | T391 - Link Integrity Timer (applicable to NNI FR port only), indicating the interval at which a Status Enquiry message is sent. … |
1.3.6.1.4.1.351.100.4.2.1.1.1.29 | frLportPollCycle | 0 | 0 | N391 - Full Status Polling Cycle (applicable to NNI FR port only), indicating the interval (in terms of polling cycles) at which … |
1.3.6.1.4.1.351.100.4.2.1.1.1.30 | frLportCLLMTimer | 0 | 0 | The timer for CLLM messages in CLLM intervals. No CLLM if 0 is configured. If a user configures this value to be greater than 0 t… |
1.3.6.1.4.1.351.100.4.2.1.1.1.31 | frLportEFCItoBECN | 0 | 0 | This object indicates whether EFCI to BECN mapping is enabled. |
1.3.6.1.4.1.351.100.4.2.1.1.1.32 | frLportSrRTS | 0 | 0 | The current status of the RTS lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.33 | frLportSrDTR | 0 | 0 | The current status of the DTR lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.34 | frLportSrDCD | 0 | 0 | The current status of the DCD lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.35 | frLportSrCTS | 0 | 0 | The current status of the CTS lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.36 | frLportSrDSR | 0 | 0 | The current status of the DSR lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.37 | frLportLoopBack | 0 | 0 | The loopback mode |
1.3.6.1.4.1.351.100.4.2.1.1.1.38 | frLportExtConFail | 0 | 0 | The flag indicating if the connection with the external device is lost. |