Reference record for OID 1.3.6.1.4.1.351.100.4.2.1.1.1.26



parent
1.3.6.1.4.1.351.100.4.2.1.1.1 (frLportCnfEntry)
node code
26
node name
frLportMinFrmFlgs
dot oid
1.3.6.1.4.1.351.100.4.2.1.1.1.26
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) bpx8600(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) snmpAgents(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) bpx8600(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) snmpAgents(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) bpx8600(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) snmpAgents(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) bpx8600(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) snmpAgents(100) strmSwitchMIB(4) switchServiceObjects(2) frServiceObjects(1) frLportCnfTable(1) frLportCnfEntry(1) frLportMinFrmFlgs(26)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/stratacom/bpx8600/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • /iso/identified-organization/dod/internet/private/enterprise/stratacom/snmpAgents/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • ...skipped...
  • /iso/org/dod/internet/private/enterprise/stratacom/bpx8600/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • /iso/org/dod/internet/private/enterprise/stratacom/snmpAgents/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • /iso/org/dod/internet/private/enterprises/stratacom/bpx8600/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • /iso/org/dod/internet/private/enterprises/stratacom/snmpAgents/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/private/enterprises/stratacom/bpx8600/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • /iso/iso-identified-organization/dod/internet/private/enterprises/stratacom/snmpAgents/strmSwitchMIB/switchServiceObjects/frServiceObjects/frLportCnfTable/frLportCnfEntry/frLportMinFrmFlgs
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/351/100/4/2/1/1/1/26

    Description by circitor

    The minimum number of flags between frames. All values
    in the range 1 to 255 are valid and the default is 1.

    Parsed from file STRATACOM-MIB.mib
    Module: STRATACOM-MIB

    Information by oid_info

    Vendor: Stratacom
    Module: STRATACOM-MIB

    [Automatically extracted from oidview.com]

    Information by circitor

    frLportMinFrmFlgs OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The minimum number of flags between frames. All values in the range 1 to 255 are valid and the default is 1." ::= { frLportCnfEntry 26 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.351)

    Clyde Iwamoto

    Brothers (37)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.351.100.4.2.1.1.1.1 frLportSlotIndex 0 0 The slot number
    1.3.6.1.4.1.351.100.4.2.1.1.1.2 frLportPortIndex 0 0 The port number
    1.3.6.1.4.1.351.100.4.2.1.1.1.3 frLportPortDLCI 0 0 Port DLCI for Frame Forwarding (FRI subrate interface only).
    - Get Operation:
    If the network manager attempts to GET this object …
    1.3.6.1.4.1.351.100.4.2.1.1.1.4 frLportAdminStatus 0 0 User requested state for logical port table row. A user
    may up, down, configure, add and delete a FR Logical port.
    1.3.6.1.4.1.351.100.4.2.1.1.1.5 frLportOperStatus 0 0 Actual state of the logical port.
    1.3.6.1.4.1.351.100.4.2.1.1.1.6 frLportPortSpeed 0 0 The baud rate of the port. For FRI T1/E1 interface, this
    object is determined when this port is added by
    the number of channels a…
    1.3.6.1.4.1.351.100.4.2.1.1.1.7 frLportClockType 0 0 The type of port clock (FRI subrate interface only). For
    T1/E1 interface this object should be none.
    - Get Operation:
    If the netwo…
    1.3.6.1.4.1.351.100.4.2.1.1.1.8 frLportPortType 0 0 The type of FRP subrate port. This object is not used in
    switch software release 8.1 It is retained for historical
    reasons, and p…
    1.3.6.1.4.1.351.100.4.2.1.1.1.9 frLportVcCount 0 0 The number of virtual connections that terminate on
    this port. Note that there can be up to 252 connections
    per FRP cards shared …
    1.3.6.1.4.1.351.100.4.2.1.1.1.10 frLportFirstVcPtr 0 0 The object identifier denoting the first endpoint
    associated with this port. For current implementation,
    this OID points to the …
    1.3.6.1.4.1.351.100.4.2.1.1.1.11 frLportAggrChCnt 0 0 The number of aggregate channels assigned to this logical
    port (FRI T1/E1 interface only) when the port is added.
    For subrate por…
    1.3.6.1.4.1.351.100.4.2.1.1.1.12 frLportChSpeed 0 0 The channel speed (FRI T1/E1 interface only). For FRI
    subrate interface this object should be set as na.
    1.3.6.1.4.1.351.100.4.2.1.1.1.13 frLportMaxTxQDepth 0 0 The maximum bytes queued for transmission from the
    FRP port
    1.3.6.1.4.1.351.100.4.2.1.1.1.14 frLportECNQThresh 0 0 Port explicit congestion notification threshold. This
    is the point at which the BECN and FECN bits will be
    set in the communicati…
    1.3.6.1.4.1.351.100.4.2.1.1.1.15 frLportDEThresh 0 0 The percentage of the queue depth above which frames
    with the Discard Eligibility bit set will be discarded.
    An entry of 100% eff…
    1.3.6.1.4.1.351.100.4.2.1.1.1.16 frLportIDEMap 0 0 The flag indicating whether IDE to DE mapping should be
    performed.
    1.3.6.1.4.1.351.100.4.2.1.1.1.17 frLportSigProt 0 0 The specified LMI operation mode. The options can be
    1 - (UNI)LMI disabled
    2 - (UNI)LMI and asynchronous update enabled
    3 - (UNI)L…
    1.3.6.1.4.1.351.100.4.2.1.1.1.18 frLportNNIStatus 0 0 The flag indicating whether NNI is active on the specified
    slot.port.
    - Get Operation only:
    This object is always NO if the networ…
    1.3.6.1.4.1.351.100.4.2.1.1.1.19 frLportAsynStatus 0 0 The flag indicating whether the IPX should send unsolicited
    LMI update messages as they appear or wait for the polling
    from the u…
    1.3.6.1.4.1.351.100.4.2.1.1.1.20 frLportPolVerTmr 0 0 The link integrity verification timer heartbeat (keep-alive)
    period. It should be set to 5 seconds more than the
    heartbeat time i…
    1.3.6.1.4.1.351.100.4.2.1.1.1.21 frLportErrThresh 0 0 The number of the failures in the monitored events that
    cause the keep-alive process to report an alarm.
    - Get Operation:
    Since th…
    1.3.6.1.4.1.351.100.4.2.1.1.1.22 frLportMonEveCnt 0 0 The number of monitored events for the keep-alive process.
    A port communication fail condition is cleared after this
    number of su…
    1.3.6.1.4.1.351.100.4.2.1.1.1.23 frLportCommPri 0 0 The flag specifying if the connection SNA priority should
    be communicated to the user device attached to the port.
    - Get Operatio…
    1.3.6.1.4.1.351.100.4.2.1.1.1.24 frLportUpRNR 0 0 The upper Receiver-Not-Ready threshold. This threshold
    specifies the number of receiver not ready indications
    from the user equip…
    1.3.6.1.4.1.351.100.4.2.1.1.1.25 frLportLowRNR 0 0 The Lower Receiver-Not-Ready threshold. This threshold
    specifies the number of receiver not ready indications
    from the user equip…
    1.3.6.1.4.1.351.100.4.2.1.1.1.27 frLportOamThresh 0 0 The alarm threshold for number of OAM heartbeat
    FastPackets missed before propagating A-bit=0.
    This threshold is applicable to bo…
    1.3.6.1.4.1.351.100.4.2.1.1.1.28 frLportLinkTimer 0 0 T391 - Link Integrity Timer (applicable to
    NNI FR port only), indicating the interval at which
    a Status Enquiry message is sent. …
    1.3.6.1.4.1.351.100.4.2.1.1.1.29 frLportPollCycle 0 0 N391 - Full Status Polling Cycle (applicable to
    NNI FR port only), indicating the interval (in terms
    of polling cycles) at which …
    1.3.6.1.4.1.351.100.4.2.1.1.1.30 frLportCLLMTimer 0 0 The timer for CLLM messages in CLLM intervals. No CLLM if 0
    is configured. If a user configures this value to be greater
    than 0 t…
    1.3.6.1.4.1.351.100.4.2.1.1.1.31 frLportEFCItoBECN 0 0 This object indicates whether EFCI to BECN mapping
    is enabled.
    1.3.6.1.4.1.351.100.4.2.1.1.1.32 frLportSrRTS 0 0 The current status of the RTS lead (subrated FRI only).
    Na is used for T1/E1 FRI.
    - Get Operation:
    This object is valid only if th…
    1.3.6.1.4.1.351.100.4.2.1.1.1.33 frLportSrDTR 0 0 The current status of the DTR lead (subrated FRI only).
    Na is used for T1/E1 FRI.
    - Get Operation:
    This object is valid only if th…
    1.3.6.1.4.1.351.100.4.2.1.1.1.34 frLportSrDCD 0 0 The current status of the DCD lead (subrated FRI only).
    Na is used for T1/E1 FRI.
    - Get Operation:
    This object is valid only if th…
    1.3.6.1.4.1.351.100.4.2.1.1.1.35 frLportSrCTS 0 0 The current status of the CTS lead (subrated FRI only).
    Na is used for T1/E1 FRI.
    - Get Operation:
    This object is valid only if th…
    1.3.6.1.4.1.351.100.4.2.1.1.1.36 frLportSrDSR 0 0 The current status of the DSR lead (subrated FRI only).
    Na is used for T1/E1 FRI.
    - Get Operation:
    This object is valid only if th…
    1.3.6.1.4.1.351.100.4.2.1.1.1.37 frLportLoopBack 0 0 The loopback mode
    1.3.6.1.4.1.351.100.4.2.1.1.1.38 frLportExtConFail 0 0 The flag indicating if the connection with the external
    device is lost.