The type of port clock (FRI subrate interface only). For
T1/E1 interface this object should be none.
- Get Operation:
If the network manager attempts to get this object from a
T1/E1 port, none (3) is returned.
- Set Operation:
If the network manager attempts to set this object on a
T1/E1 port wit, none, oror none, looped type, an error
is returned.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
frLportClockType OBJECT-TYPE SYNTAX INTEGER { normal (1), looped (2), none (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of port clock (FRI subrate interface only). For T1/E1 interface this object should be none. - Get Operation: If the network manager attempts to get this object from a T1/E1 port, none (3) is returned. - Set Operation: If the network manager attempts to set this object on a T1/E1 port wit, none, oror none, looped type, an error is returned." ::= { frLportCnfEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.100.4.2.1.1.1.1 | frLportSlotIndex | 0 | 0 | The slot number |
1.3.6.1.4.1.351.100.4.2.1.1.1.2 | frLportPortIndex | 0 | 0 | The port number |
1.3.6.1.4.1.351.100.4.2.1.1.1.3 | frLportPortDLCI | 0 | 0 | Port DLCI for Frame Forwarding (FRI subrate interface only). - Get Operation: If the network manager attempts to GET this object … |
1.3.6.1.4.1.351.100.4.2.1.1.1.4 | frLportAdminStatus | 0 | 0 | User requested state for logical port table row. A user may up, down, configure, add and delete a FR Logical port. |
1.3.6.1.4.1.351.100.4.2.1.1.1.5 | frLportOperStatus | 0 | 0 | Actual state of the logical port. |
1.3.6.1.4.1.351.100.4.2.1.1.1.6 | frLportPortSpeed | 0 | 0 | The baud rate of the port. For FRI T1/E1 interface, this object is determined when this port is added by the number of channels a… |
1.3.6.1.4.1.351.100.4.2.1.1.1.8 | frLportPortType | 0 | 0 | The type of FRP subrate port. This object is not used in switch software release 8.1 It is retained for historical reasons, and p… |
1.3.6.1.4.1.351.100.4.2.1.1.1.9 | frLportVcCount | 0 | 0 | The number of virtual connections that terminate on this port. Note that there can be up to 252 connections per FRP cards shared … |
1.3.6.1.4.1.351.100.4.2.1.1.1.10 | frLportFirstVcPtr | 0 | 0 | The object identifier denoting the first endpoint associated with this port. For current implementation, this OID points to the … |
1.3.6.1.4.1.351.100.4.2.1.1.1.11 | frLportAggrChCnt | 0 | 0 | The number of aggregate channels assigned to this logical port (FRI T1/E1 interface only) when the port is added. For subrate por… |
1.3.6.1.4.1.351.100.4.2.1.1.1.12 | frLportChSpeed | 0 | 0 | The channel speed (FRI T1/E1 interface only). For FRI subrate interface this object should be set as na. |
1.3.6.1.4.1.351.100.4.2.1.1.1.13 | frLportMaxTxQDepth | 0 | 0 | The maximum bytes queued for transmission from the FRP port |
1.3.6.1.4.1.351.100.4.2.1.1.1.14 | frLportECNQThresh | 0 | 0 | Port explicit congestion notification threshold. This is the point at which the BECN and FECN bits will be set in the communicati… |
1.3.6.1.4.1.351.100.4.2.1.1.1.15 | frLportDEThresh | 0 | 0 | The percentage of the queue depth above which frames with the Discard Eligibility bit set will be discarded. An entry of 100% eff… |
1.3.6.1.4.1.351.100.4.2.1.1.1.16 | frLportIDEMap | 0 | 0 | The flag indicating whether IDE to DE mapping should be performed. |
1.3.6.1.4.1.351.100.4.2.1.1.1.17 | frLportSigProt | 0 | 0 | The specified LMI operation mode. The options can be 1 - (UNI)LMI disabled 2 - (UNI)LMI and asynchronous update enabled 3 - (UNI)L… |
1.3.6.1.4.1.351.100.4.2.1.1.1.18 | frLportNNIStatus | 0 | 0 | The flag indicating whether NNI is active on the specified slot.port. - Get Operation only: This object is always NO if the networ… |
1.3.6.1.4.1.351.100.4.2.1.1.1.19 | frLportAsynStatus | 0 | 0 | The flag indicating whether the IPX should send unsolicited LMI update messages as they appear or wait for the polling from the u… |
1.3.6.1.4.1.351.100.4.2.1.1.1.20 | frLportPolVerTmr | 0 | 0 | The link integrity verification timer heartbeat (keep-alive) period. It should be set to 5 seconds more than the heartbeat time i… |
1.3.6.1.4.1.351.100.4.2.1.1.1.21 | frLportErrThresh | 0 | 0 | The number of the failures in the monitored events that cause the keep-alive process to report an alarm. - Get Operation: Since th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.22 | frLportMonEveCnt | 0 | 0 | The number of monitored events for the keep-alive process. A port communication fail condition is cleared after this number of su… |
1.3.6.1.4.1.351.100.4.2.1.1.1.23 | frLportCommPri | 0 | 0 | The flag specifying if the connection SNA priority should be communicated to the user device attached to the port. - Get Operatio… |
1.3.6.1.4.1.351.100.4.2.1.1.1.24 | frLportUpRNR | 0 | 0 | The upper Receiver-Not-Ready threshold. This threshold specifies the number of receiver not ready indications from the user equip… |
1.3.6.1.4.1.351.100.4.2.1.1.1.25 | frLportLowRNR | 0 | 0 | The Lower Receiver-Not-Ready threshold. This threshold specifies the number of receiver not ready indications from the user equip… |
1.3.6.1.4.1.351.100.4.2.1.1.1.26 | frLportMinFrmFlgs | 0 | 0 | The minimum number of flags between frames. All values in the range 1 to 255 are valid and the default is 1. |
1.3.6.1.4.1.351.100.4.2.1.1.1.27 | frLportOamThresh | 0 | 0 | The alarm threshold for number of OAM heartbeat FastPackets missed before propagating A-bit=0. This threshold is applicable to bo… |
1.3.6.1.4.1.351.100.4.2.1.1.1.28 | frLportLinkTimer | 0 | 0 | T391 - Link Integrity Timer (applicable to NNI FR port only), indicating the interval at which a Status Enquiry message is sent. … |
1.3.6.1.4.1.351.100.4.2.1.1.1.29 | frLportPollCycle | 0 | 0 | N391 - Full Status Polling Cycle (applicable to NNI FR port only), indicating the interval (in terms of polling cycles) at which … |
1.3.6.1.4.1.351.100.4.2.1.1.1.30 | frLportCLLMTimer | 0 | 0 | The timer for CLLM messages in CLLM intervals. No CLLM if 0 is configured. If a user configures this value to be greater than 0 t… |
1.3.6.1.4.1.351.100.4.2.1.1.1.31 | frLportEFCItoBECN | 0 | 0 | This object indicates whether EFCI to BECN mapping is enabled. |
1.3.6.1.4.1.351.100.4.2.1.1.1.32 | frLportSrRTS | 0 | 0 | The current status of the RTS lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.33 | frLportSrDTR | 0 | 0 | The current status of the DTR lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.34 | frLportSrDCD | 0 | 0 | The current status of the DCD lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.35 | frLportSrCTS | 0 | 0 | The current status of the CTS lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.36 | frLportSrDSR | 0 | 0 | The current status of the DSR lead (subrated FRI only). Na is used for T1/E1 FRI. - Get Operation: This object is valid only if th… |
1.3.6.1.4.1.351.100.4.2.1.1.1.37 | frLportLoopBack | 0 | 0 | The loopback mode |
1.3.6.1.4.1.351.100.4.2.1.1.1.38 | frLportExtConFail | 0 | 0 | The flag indicating if the connection with the external device is lost. |