Reference record for OID 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10



parent
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1 (frPortCnfPortGrpEntry)
node code
10
node name
portType
dot oid
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) basisServices(5) frameRelay(1) frPort(1) frPortCnf(1) frPortCnfPortGrp(1) frPortCnfPortGrpTable(1) frPortCnfPortGrpEntry(1) portType(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) basisServices(5) frameRelay(1) frPort(1) frPortCnf(1) frPortCnfPortGrp(1) frPortCnfPortGrpTable(1) frPortCnfPortGrpEntry(1) portType(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) basisServices(5) frameRelay(1) frPort(1) frPortCnf(1) frPortCnfPortGrp(1) frPortCnfPortGrpTable(1) frPortCnfPortGrpEntry(1) portType(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) basisServices(5) frameRelay(1) frPort(1) frPortCnf(1) frPortCnfPortGrp(1) frPortCnfPortGrpTable(1) frPortCnfPortGrpEntry(1) portType(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) stratacom(351) basis(110) basisServices(5) frameRelay(1) frPort(1) frPortCnf(1) frPortCnfPortGrp(1) frPortCnfPortGrpTable(1) frPortCnfPortGrpEntry(1) portType(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) stratacom(351) basis(110) basisServices(5) frameRelay(1) frPort(1) frPortCnf(1) frPortCnfPortGrp(1) frPortCnfPortGrpTable(1) frPortCnfPortGrpEntry(1) portType(10)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/stratacom/basis/basisServices/frameRelay/frPort/frPortCnf/frPortCnfPortGrp/frPortCnfPortGrpTable/frPortCnfPortGrpEntry/portType
  • /iso/identified-organization/dod/internet/private/enterprises/stratacom/basis/basisServices/frameRelay/frPort/frPortCnf/frPortCnfPortGrp/frPortCnfPortGrpTable/frPortCnfPortGrpEntry/portType
  • /iso/org/dod/internet/private/enterprise/stratacom/basis/basisServices/frameRelay/frPort/frPortCnf/frPortCnfPortGrp/frPortCnfPortGrpTable/frPortCnfPortGrpEntry/portType
  • /iso/org/dod/internet/private/enterprises/stratacom/basis/basisServices/frameRelay/frPort/frPortCnf/frPortCnfPortGrp/frPortCnfPortGrpTable/frPortCnfPortGrpEntry/portType
  • /iso/iso-identified-organization/dod/internet/private/enterprise/stratacom/basis/basisServices/frameRelay/frPort/frPortCnf/frPortCnfPortGrp/frPortCnfPortGrpTable/frPortCnfPortGrpEntry/portType
  • /iso/iso-identified-organization/dod/internet/private/enterprises/stratacom/basis/basisServices/frameRelay/frPort/frPortCnf/frPortCnfPortGrp/frPortCnfPortGrpTable/frPortCnfPortGrpEntry/portType
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/351/110/5/1/1/1/1/1/1/10

    Description by circitor

    This represents port type
    For FRSM12 card:
    frFUNI not Applicable. For frame-relay the ifType is
    frameRelayService(44) and for frame-forward it is
    frForward(158).


    Parsed from file CISCO-WAN-AXIPOP-MIB.mib
    Module: CISCO-WAN-AXIPOP-MIB

    Description by cisco_v1

    The value of this object identifies the network
    interface for this frame relay port.

    The Possible values are:

    frame-relay(1) : Frame Relay Service Port

    frFUNI (2) : Frame based UNI Port.
    when a frame arrives from the FUNI interface
    the 2 byte FUNI header is removed and
    frame is segmented into ATM Cells by using
    AAL5.

    frame-forward(3): Frame Forward Port.
    In this case 2 byte Q.922 header is not assumed
    or interpreted. The signaling(LMI) parameters
    are not applicable for these ports.

    Relationship with ifTable:

    The service modules in which ifTable is
    implemented following side-effects will
    take place.

    For value frame-relay(1) an ifTable entry with
    ifType = frameRelayService(44) will be created.

    For value frame-forward(3) an ifTable entry with
    ifType = frForward(158) will be created.

    This object can not be modified after the port
    is created.

    Description by mibdepot

    The value of this object identifies the network
    interface for this frame relay port.

    The Possible values are:

    frame-relay(1) : Frame Relay Service Port

    frFUNI (2) : Frame based UNI Port.
    when a frame arrives from the FUNI interface
    the 2 byte FUNI header is removed and
    frame is segmented into ATM Cells by using
    AAL5.

    frame-forward(3): Frame Forward Port.
    In this case 2 byte Q.922 header is not assumed
    or interpreted. The signaling(LMI) parameters
    are not applicable for these ports.

    Relationship with ifTable:

    The service modules in which ifTable is
    implemented following side-effects will
    take place.

    For value frame-relay(1) an ifTable entry with
    ifType = frameRelayService(44) will be created.

    For value frame-forward(3) an ifTable entry with
    ifType = frForward(158) will be created.

    This object can not be modified after the port
    is created.

    Parsed from file CISCO-WAN-FR-PORT-MIB.my.txt
    Company: None
    Module: CISCO-WAN-FR-PORT-MIB

    Description by cisco

    The value of this object identifies the network
    interface for this frame relay port.

    The Possible values are:

    frame-relay(1) : Frame Relay Service Port

    frFUNI (2) : Frame based UNI Port.
    when a frame arrives from the FUNI interface
    the 2 byte FUNI header is removed and
    frame is segmented into ATM Cells by using
    AAL5.

    frame-forward(3): Frame Forward Port.
    In this case 2 byte Q.922 header is not assumed
    or interpreted. The signaling(LMI) parameters
    are not applicable for these ports.

    Relationship with ifTable:

    The service modules in which ifTable is
    implemented following side-effects will
    take place.

    For value frame-relay(1) an ifTable entry with
    ifType = frameRelayService(44) will be created.

    For value frame-forward(3) an ifTable entry with
    ifType = frForward(158) will be created.

    This object can not be modified after the port
    is created.

    Information by circitor

    portType	OBJECT-TYPE
	SYNTAX	INTEGER {
            frame-relay(1),
            frFUNI(2),
	    frame-forward(3)
            }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"This represents port type
		 For FRSM12 card:
		 frFUNI not Applicable. For frame-relay the ifType is
		 frameRelayService(44) and for frame-forward it is
		 frForward(158).
		"
	DEFVAL { frame-relay }
	::= { frPortCnfPortGrpEntry 10 }

    Information by cisco_v1

    portType OBJECT-TYPE
    SYNTAX INTEGER {
        frame-relay(1),
        frFUNI(2),
        frame-forward(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of this object identifies the network
        interface for this frame relay port.
        
         The Possible values are:
        
          frame-relay(1)  : Frame Relay Service Port
        
          frFUNI     (2)  : Frame based UNI Port.
                            when a frame arrives from the FUNI interface
                            the 2 byte FUNI header is removed and 
                            frame is segmented into ATM Cells by using
                            AAL5.
        
          frame-forward(3): Frame Forward Port.
                            In this case 2 byte Q.922 header is not assumed
                            or interpreted. The signaling(LMI) parameters
                            are not applicable for these ports.
        
         Relationship with ifTable:
        
           The service modules in which ifTable is
           implemented following side-effects will
           take place.
        
           For value frame-relay(1) an ifTable entry with
           ifType = frameRelayService(44) will be created.
        
           For value frame-forward(3) an ifTable entry with
           ifType = frForward(158) will be created.
        
           This object can not be modified after the port
           is created."
    DEFVAL { frame-relay }
    ::= { frPortCnfPortGrpEntry 10 }

    Information by oid_info

    Vendor: Stratacom
    Module: CISCO-WAN-AXIPOP-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    portType OBJECT-TYPE
    SYNTAX	INTEGER {
                    frame-relay   (1),
                    frFUNI        (2),
                    frame-forward (3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of this object identifies the network
        interface for this frame relay port.

         The Possible values are:
   
          frame-relay(1)  : Frame Relay Service Port

          frFUNI     (2)  : Frame based UNI Port.
                            when a frame arrives from the FUNI interface
                            the 2 byte FUNI header is removed and 
                            frame is segmented into ATM Cells by using
                            AAL5.

          frame-forward(3): Frame Forward Port.
                            In this case 2 byte Q.922 header is not assumed
                            or interpreted. The signaling(LMI) parameters
                            are not applicable for these ports.

         Relationship with ifTable:

           The service modules in which ifTable is
           implemented following side-effects will
           take place.

           For value frame-relay(1) an ifTable entry with
           ifType = frameRelayService(44) will be created.

           For value frame-forward(3) an ifTable entry with
           ifType = frForward(158) will be created.

           This object can not be modified after the port
           is created."
    DEFVAL { frame-relay }
    ::= { frPortCnfPortGrpEntry 10 }

    Information by cisco

    portType OBJECT-TYPE
    SYNTAX	INTEGER {
                    frame-relay   (1),
                    frFUNI        (2),
                    frame-forward (3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of this object identifies the network
        interface for this frame relay port.

         The Possible values are:
   
          frame-relay(1)  : Frame Relay Service Port

          frFUNI     (2)  : Frame based UNI Port.
                            when a frame arrives from the FUNI interface
                            the 2 byte FUNI header is removed and 
                            frame is segmented into ATM Cells by using
                            AAL5.

          frame-forward(3): Frame Forward Port.
                            In this case 2 byte Q.922 header is not assumed
                            or interpreted. The signaling(LMI) parameters
                            are not applicable for these ports.

         Relationship with ifTable:

           The service modules in which ifTable is
           implemented following side-effects will
           take place.

           For value frame-relay(1) an ifTable entry with
           ifType = frameRelayService(44) will be created.

           For value frame-forward(3) an ifTable entry with
           ifType = frForward(158) will be created.

           This object can not be modified after the port
           is created."
    DEFVAL { frame-relay }
    ::= { frPortCnfPortGrpEntry 10 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.351)

    Clyde Iwamoto

    Brothers (26)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.1 portNum 0 0 This is logical port number.
    If we have T1 card then the maximum port number is 192
    and if we have E1 card the maximum port numbe…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.2 portLineNum 0 0 This represents the line number
    For FRSM12 card:
    The ifIndex of the physical line on which this port
    is provisioned.
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.3 portRowStatus 0 0 This variable enables or modifies the port
    1- add
    2 - del
    3 - mod
    For FRSM12 card:
    For Snmp GET operations, only mod is returned.
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.4 portDs0ConfigBitMap 0 0 This respesents bit map of DS0s for a line which
    are used to form this logical port. Bit 0
    represents DS0-1.
    This entry is not use…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5 portDs0Speed 0 0 This represents port speed of 64 or 56
    1 - speed56k
    2 - speed64k
    3 - unUsed.
    This field is not used for unchannelised FRSM-VHS (FRS…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.6 portFlagsBetweenFrames 0 0 Number of flags transmitted between FR frames
    For FRSM12 card:
    Only the values 1 to 8 are supported. The mapping is as follows:
    MI…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7 portEqueueServiceRatio 0 0 Number of times queue 1 is serviced
    for every time queue 2 is serviced.
    The value 0 is supported only by FRSM-VHS.

    FRSM-VHS suppo…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.8 portSpeed 0 0 Configured speed of port in kbps
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.9 portAdmin 0 0 used to up and down the port
    For FRSM12 card:
    This variable will be equivalent to ifAdminStatus of
    of ifTable. The write-only is …
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.11 portSvcStatus 0 0 This represents SVC status

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.12 portSvcInUse 0 0 This represents port svc in use

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.13 portSvcShareLcn 0 0 This represents port type

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.14 portSvcLcnLow 0 0 This represents low end of reserved LCN for svc

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.15 portSvcLcnHigh 0 0 This represents high end of reserved LCN for svc

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.16 portSvcDlciLow 0 0 This represents low end of reserved DLCI for svc

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.17 portSvcDlciHigh 0 0 This represents high end of reserved DLCI for svc

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18 portDeleteSvcs 0 0 Setting this object to 1 indicates that all the SVC
    connections on the given port has to be deleted

    For FRSM12 card: Not Supporte…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.19 portIngrSvcBandW 0 0 This represents Ingress Bandwidth reserve for SVC

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.20 portEgrSvcBandW 0 0 This represents Egress Bandwidth reserve for SVC

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21 portBERTEnable 0 0 This variable enables BERT

    For FRSM12 card: Not Supported
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.22 portEnhancedSIW 0 0 This variable enables/disables enhanced SIW feature.
    Enabling this permits support for SIW translation of
    Appletalk. This feature…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.23 portM32EgrQueueThresh 0 0 This represents the M32 logical port Egress Queue
    threshold in bytes. Frames will not be queued
    until the number of bytes in the …
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.24 portHeaderLen 0 0 This object is added for FRSM12.

    The value of this object identifies the Q.922
    Address field length and DLCI length for this
    UNI/N…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25 portFrameChkSumType 0 0 This object is added for FRSM12.

    The value of this object identifies the CRC Length
    in the HDLC Packet. Applicable for FrameForwa…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.26 portFileId 0 0 The ID of the SCT file that holds module specific configuration
    parameters for this FR virtual interface.

    This object is not app…
    1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.27 portOverSubEnable 0 0 The value of this object enables/disables the
    port to be over subscribed.

    This object is not applicable to MGX Release 1.x.