This represents the line number
For FRSM12 card:
The ifIndex of the physical line on which this port
is provisioned.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This object represents the physical line number
on which the frame relay port need to be created.
For Service Modules, supporting ifTable, this
must be the ifIndex value of the physical line
or logical interface. The ifIndex entries in
ifTable applicable to this category are identified
by ifType values of ds3(30), ds1(18).
This object represents the physical line number
on which the frame relay port need to be created.
For Service Modules, supporting ifTable, this
must be the ifIndex value of the physical line
or logical interface. The ifIndex entries in
ifTable applicable to this category are identified
by ifType values of ds3(30), ds1(18).
Parsed from file CISCO-WAN-FR-PORT-MIB.my.txt
Company: None
Module: CISCO-WAN-FR-PORT-MIB
This object represents the physical line number
on which the frame relay port need to be created.
For Service Modules, supporting ifTable, this
must be the ifIndex value of the physical line
or logical interface. The ifIndex entries in
ifTable applicable to this category are identified
by ifType values of ds3(30), ds1(18).
portLineNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This represents the line number For FRSM12 card: The ifIndex of the physical line on which this port is provisioned. " ::= { frPortCnfPortGrpEntry 2}
portLineNum OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This object represents the physical line number on which the frame relay port need to be created. For Service Modules, supporting ifTable, this must be the ifIndex value of the physical line or logical interface. The ifIndex entries in ifTable applicable to this category are identified by ifType values of ds3(30), ds1(18)." ::= { frPortCnfPortGrpEntry 2 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
portLineNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the physical line number on which the frame relay port need to be created. For Service Modules, supporting ifTable, this must be the ifIndex value of the physical line or logical interface. The ifIndex entries in ifTable applicable to this category are identified by ifType values of ds3(30), ds1(18)." ::= { frPortCnfPortGrpEntry 2}
portLineNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the physical line number on which the frame relay port need to be created. For Service Modules, supporting ifTable, this must be the ifIndex value of the physical line or logical interface. The ifIndex entries in ifTable applicable to this category are identified by ifType values of ds3(30), ds1(18)." ::= { frPortCnfPortGrpEntry 2}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.1 | portNum | 0 | 0 | This is logical port number. If we have T1 card then the maximum port number is 192 and if we have E1 card the maximum port numbe… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.3 | portRowStatus | 0 | 0 | This variable enables or modifies the port 1- add 2 - del 3 - mod For FRSM12 card: For Snmp GET operations, only mod is returned. |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.4 | portDs0ConfigBitMap | 0 | 0 | This respesents bit map of DS0s for a line which are used to form this logical port. Bit 0 represents DS0-1. This entry is not use… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5 | portDs0Speed | 0 | 0 | This represents port speed of 64 or 56 1 - speed56k 2 - speed64k 3 - unUsed. This field is not used for unchannelised FRSM-VHS (FRS… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.6 | portFlagsBetweenFrames | 0 | 0 | Number of flags transmitted between FR frames For FRSM12 card: Only the values 1 to 8 are supported. The mapping is as follows: MI… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7 | portEqueueServiceRatio | 0 | 0 | Number of times queue 1 is serviced for every time queue 2 is serviced. The value 0 is supported only by FRSM-VHS. FRSM-VHS suppo… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.8 | portSpeed | 0 | 0 | Configured speed of port in kbps |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.9 | portAdmin | 0 | 0 | used to up and down the port For FRSM12 card: This variable will be equivalent to ifAdminStatus of of ifTable. The write-only is … |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10 | portType | 0 | 0 | This represents port type For FRSM12 card: frFUNI not Applicable. For frame-relay the ifType is frameRelayService(44) and for fram… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.11 | portSvcStatus | 0 | 0 | This represents SVC status For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.12 | portSvcInUse | 0 | 0 | This represents port svc in use For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.13 | portSvcShareLcn | 0 | 0 | This represents port type For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.14 | portSvcLcnLow | 0 | 0 | This represents low end of reserved LCN for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.15 | portSvcLcnHigh | 0 | 0 | This represents high end of reserved LCN for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.16 | portSvcDlciLow | 0 | 0 | This represents low end of reserved DLCI for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.17 | portSvcDlciHigh | 0 | 0 | This represents high end of reserved DLCI for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18 | portDeleteSvcs | 0 | 0 | Setting this object to 1 indicates that all the SVC connections on the given port has to be deleted For FRSM12 card: Not Supporte… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.19 | portIngrSvcBandW | 0 | 0 | This represents Ingress Bandwidth reserve for SVC For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.20 | portEgrSvcBandW | 0 | 0 | This represents Egress Bandwidth reserve for SVC For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21 | portBERTEnable | 0 | 0 | This variable enables BERT For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.22 | portEnhancedSIW | 0 | 0 | This variable enables/disables enhanced SIW feature. Enabling this permits support for SIW translation of Appletalk. This feature… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.23 | portM32EgrQueueThresh | 0 | 0 | This represents the M32 logical port Egress Queue threshold in bytes. Frames will not be queued until the number of bytes in the … |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.24 | portHeaderLen | 0 | 0 | This object is added for FRSM12. The value of this object identifies the Q.922 Address field length and DLCI length for this UNI/N… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25 | portFrameChkSumType | 0 | 0 | This object is added for FRSM12. The value of this object identifies the CRC Length in the HDLC Packet. Applicable for FrameForwa… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.26 | portFileId | 0 | 0 | The ID of the SCT file that holds module specific configuration parameters for this FR virtual interface. This object is not app… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.27 | portOverSubEnable | 0 | 0 | The value of this object enables/disables the port to be over subscribed. This object is not applicable to MGX Release 1.x. |