This represents port speed of 64 or 56
1 - speed56k
2 - speed64k
3 - unUsed.
This field is not used for unchannelised FRSM-VHS (FRSM-2T3/
FRSM-2E3/FRSM-HS2/FRSM-T3B/FRSM-E3B/FRSM-HS2B) cards; in such
cards, the portDs0Speed field carries a value of 'unUsed' always.
For FRSM12 card:
This is set to 3 - unUsed.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
The value of this object is used for
configuring the port speed(or data rate) of
Ds0 in frame relay port.
speed56k(1) : set to 56k
speed64k(2) : set to 64k
unUsed(3) : Not applicable.
This field is not applicable for unchannelized
interfaces/ports. In case of unchannelized interfaces
this object is set to 'unUsed' always.
This object can be specified only during
port creation.
The value of this object is used for
configuring the port speed(or data rate) of
Ds0 in frame relay port.
speed56k(1) : set to 56k
speed64k(2) : set to 64k
unUsed(3) : Not applicable.
This field is not applicable for unchannelized
interfaces/ports. In case of unchannelized interfaces
this object is set to 'unUsed' always.
This object can be specified only during
port creation.
Parsed from file CISCO-WAN-FR-PORT-MIB.my.txt
Company: None
Module: CISCO-WAN-FR-PORT-MIB
The value of this object is used for
configuring the port speed(or data rate) of
Ds0 in frame relay port.
speed56k(1) : set to 56k
speed64k(2) : set to 64k
unUsed(3) : Not applicable.
This field is not applicable for unchannelized
interfaces/ports. In case of unchannelized interfaces
this object is set to 'unUsed' always.
This object can be specified only during
port creation.
portDs0Speed OBJECT-TYPE SYNTAX INTEGER { speed56k(1), speed64k(2), unUsed(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This represents port speed of 64 or 56 1 - speed56k 2 - speed64k 3 - unUsed. This field is not used for unchannelised FRSM-VHS (FRSM-2T3/ FRSM-2E3/FRSM-HS2/FRSM-T3B/FRSM-E3B/FRSM-HS2B) cards; in such cards, the portDs0Speed field carries a value of 'unUsed' always. For FRSM12 card: This is set to 3 - unUsed. " DEFVAL { speed64k } ::= { frPortCnfPortGrpEntry 5 }
portDs0Speed OBJECT-TYPE SYNTAX INTEGER { speed56k(1), speed64k(2), unUsed(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is used for configuring the port speed(or data rate) of Ds0 in frame relay port. speed56k(1) : set to 56k speed64k(2) : set to 64k unUsed(3) : Not applicable. This field is not applicable for unchannelized interfaces/ports. In case of unchannelized interfaces this object is set to 'unUsed' always. This object can be specified only during port creation." DEFVAL { speed64k } ::= { frPortCnfPortGrpEntry 5 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
portDs0Speed OBJECT-TYPE SYNTAX INTEGER { speed56k (1), speed64k (2), unUsed (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for configuring the port speed(or data rate) of Ds0 in frame relay port. speed56k(1) : set to 56k speed64k(2) : set to 64k unUsed(3) : Not applicable. This field is not applicable for unchannelized interfaces/ports. In case of unchannelized interfaces this object is set to 'unUsed' always. This object can be specified only during port creation." DEFVAL { speed64k } ::= { frPortCnfPortGrpEntry 5 }
portDs0Speed OBJECT-TYPE SYNTAX INTEGER { speed56k (1), speed64k (2), unUsed (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for configuring the port speed(or data rate) of Ds0 in frame relay port. speed56k(1) : set to 56k speed64k(2) : set to 64k unUsed(3) : Not applicable. This field is not applicable for unchannelized interfaces/ports. In case of unchannelized interfaces this object is set to 'unUsed' always. This object can be specified only during port creation." DEFVAL { speed64k } ::= { frPortCnfPortGrpEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.1 | portNum | 0 | 0 | This is logical port number. If we have T1 card then the maximum port number is 192 and if we have E1 card the maximum port numbe… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.2 | portLineNum | 0 | 0 | This represents the line number For FRSM12 card: The ifIndex of the physical line on which this port is provisioned. |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.3 | portRowStatus | 0 | 0 | This variable enables or modifies the port 1- add 2 - del 3 - mod For FRSM12 card: For Snmp GET operations, only mod is returned. |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.4 | portDs0ConfigBitMap | 0 | 0 | This respesents bit map of DS0s for a line which are used to form this logical port. Bit 0 represents DS0-1. This entry is not use… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.6 | portFlagsBetweenFrames | 0 | 0 | Number of flags transmitted between FR frames For FRSM12 card: Only the values 1 to 8 are supported. The mapping is as follows: MI… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7 | portEqueueServiceRatio | 0 | 0 | Number of times queue 1 is serviced for every time queue 2 is serviced. The value 0 is supported only by FRSM-VHS. FRSM-VHS suppo… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.8 | portSpeed | 0 | 0 | Configured speed of port in kbps |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.9 | portAdmin | 0 | 0 | used to up and down the port For FRSM12 card: This variable will be equivalent to ifAdminStatus of of ifTable. The write-only is … |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10 | portType | 0 | 0 | This represents port type For FRSM12 card: frFUNI not Applicable. For frame-relay the ifType is frameRelayService(44) and for fram… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.11 | portSvcStatus | 0 | 0 | This represents SVC status For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.12 | portSvcInUse | 0 | 0 | This represents port svc in use For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.13 | portSvcShareLcn | 0 | 0 | This represents port type For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.14 | portSvcLcnLow | 0 | 0 | This represents low end of reserved LCN for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.15 | portSvcLcnHigh | 0 | 0 | This represents high end of reserved LCN for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.16 | portSvcDlciLow | 0 | 0 | This represents low end of reserved DLCI for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.17 | portSvcDlciHigh | 0 | 0 | This represents high end of reserved DLCI for svc For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18 | portDeleteSvcs | 0 | 0 | Setting this object to 1 indicates that all the SVC connections on the given port has to be deleted For FRSM12 card: Not Supporte… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.19 | portIngrSvcBandW | 0 | 0 | This represents Ingress Bandwidth reserve for SVC For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.20 | portEgrSvcBandW | 0 | 0 | This represents Egress Bandwidth reserve for SVC For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21 | portBERTEnable | 0 | 0 | This variable enables BERT For FRSM12 card: Not Supported |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.22 | portEnhancedSIW | 0 | 0 | This variable enables/disables enhanced SIW feature. Enabling this permits support for SIW translation of Appletalk. This feature… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.23 | portM32EgrQueueThresh | 0 | 0 | This represents the M32 logical port Egress Queue threshold in bytes. Frames will not be queued until the number of bytes in the … |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.24 | portHeaderLen | 0 | 0 | This object is added for FRSM12. The value of this object identifies the Q.922 Address field length and DLCI length for this UNI/N… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25 | portFrameChkSumType | 0 | 0 | This object is added for FRSM12. The value of this object identifies the CRC Length in the HDLC Packet. Applicable for FrameForwa… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.26 | portFileId | 0 | 0 | The ID of the SCT file that holds module specific configuration parameters for this FR virtual interface. This object is not app… |
1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.27 | portOverSubEnable | 0 | 0 | The value of this object enables/disables the port to be over subscribed. This object is not applicable to MGX Release 1.x. |