The MIB Module for DS3/E3 interface
configuration , statistics and Alarm
configuration.
This MIB is supported in T3/E3 service modules
in MGX products.
Some of the T3/E3 service modules(Cards) are:
PXM1 : Processor Switch Module.
CESM-T3E3: Circuit Emulation Service Module
FRSM-VHS : Frame Relay Service Module. Includes
T3 and Channelized T3 categories.
FRSM-2CT3: Channelized FRSM Module
SRM-3T3 : Service Resource Module
Terminologies Used :
SDH : SONET Digital Hierarchy
PLCP : Physical Layer Convergence Procedure.
BERT : Bit Error Rate Testing.
FEAC : Far End Alarm Code.
OOF : Out Of Frame.
AIS : Alarm Indication Signal.
LOF : Loss Of Frame.
RAI : Remote Alarm Indication.
HCS : Header Check Sequence
HEC : Header Error Control
MA byte : Maintenance and Adaptation byte
Tx MA Byte: This is explained in ITU-T G.832
This Byte contains following fields:
Payload type
Payload dependent bits
Timing maker bit
Rx MA Byte: This is explained in ITU-T G.832
This Byte contains following fields:
Payload type
Timing maker bit
Parsed from file CISCO-MGX82XX-DSX3-MIB.mib
Module: CISCO-MGX82XX-DSX3-MIB
The MIB Module for DS3/E3 interface
configuration , statistics and Alarm
configuration.
This MIB is supported in T3/E3 service modules
in MGX products.
Some of the T3/E3 service modules(Cards) are:
PXM1 : Processor Switch Module.
CESM-T3E3: Circuit Emulation Service Module
FRSM-VHS : Frame Relay Service Module. Includes
T3 and Channelized T3 categories.
FRSM-2CT3: Channelized FRSM Module
SRM-3T3 : Service Resource Module
Terminologies Used :
SDH : SONET Digital Hierarchy
PLCP : Physical Layer Convergence Procedure.
BERT : Bit Error Rate Testing.
FEAC : Far End Alarm Code.
OOF : Out Of Frame.
AIS : Alarm Indication Signal.
LOF : Loss Of Frame.
RAI : Remote Alarm Indication.
HCS : Header Check Sequence
HEC : Header Error Control
MA byte : Maintenance and Adaptation byte
Tx MA Byte: This is explained in ITU-T G.832
This Byte contains following fields:
Payload type
Payload dependent bits
Timing maker bit
Rx MA Byte: This is explained in ITU-T G.832
This Byte contains following fields:
Payload type
Timing maker bit
Parsed from file CISCO-MGX82XX-DSX3-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-DSX3-MIB
The MIB Module for DS3/E3 interface
configuration , statistics and Alarm
configuration.
This MIB is supported in T3/E3 service modules
in MGX products.
Some of the T3/E3 service modules(Cards) are:
PXM1 : Processor Switch Module.
CESM-T3E3: Circuit Emulation Service Module
FRSM-VHS : Frame Relay Service Module. Includes
T3 and Channelized T3 categories.
FRSM-2CT3: Channelized FRSM Module
SRM-3T3 : Service Resource Module
Terminologies Used :
SDH : SONET Digital Hierarchy
PLCP : Physical Layer Convergence Procedure.
BERT : Bit Error Rate Testing.
FEAC : Far End Alarm Code.
OOF : Out Of Frame.
AIS : Alarm Indication Signal.
LOF : Loss Of Frame.
RAI : Remote Alarm Indication.
HCS : Header Check Sequence
HEC : Header Error Control
MA byte : Maintenance and Adaptation byte
Tx MA Byte: This is explained in ITU-T G.832
This Byte contains following fields:
Payload type
Payload dependent bits
Timing maker bit
Rx MA Byte: This is explained in ITU-T G.832
This Byte contains following fields:
Payload type
Timing maker bit
ciscoMgx82xxDsx3MIB MODULE-IDENTITY LAST-UPDATED "200301110000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB Module for DS3/E3 interface configuration , statistics and Alarm configuration. This MIB is supported in T3/E3 service modules in MGX products. Some of the T3/E3 service modules(Cards) are: PXM1 : Processor Switch Module. CESM-T3E3: Circuit Emulation Service Module FRSM-VHS : Frame Relay Service Module. Includes T3 and Channelized T3 categories. FRSM-2CT3: Channelized FRSM Module SRM-3T3 : Service Resource Module Terminologies Used : SDH : SONET Digital Hierarchy PLCP : Physical Layer Convergence Procedure. BERT : Bit Error Rate Testing. FEAC : Far End Alarm Code. OOF : Out Of Frame. AIS : Alarm Indication Signal. LOF : Loss Of Frame. RAI : Remote Alarm Indication. HCS : Header Check Sequence HEC : Header Error Control MA byte : Maintenance and Adaptation byte Tx MA Byte: This is explained in ITU-T G.832 This Byte contains following fields: Payload type Payload dependent bits Timing maker bit Rx MA Byte: This is explained in ITU-T G.832 This Byte contains following fields: Payload type Timing maker bit " REVISION "200301110000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 59 }
ciscoMgx82xxDsx3MIB OBJECT IDENTIFIER ::= { ciscoWan 59 }
Vendor: Stratacom
Module: CISCO-MGX82XX-DSX3-MIB
[Automatically extracted from oidview.com]
ciscoMgx82xxDsx3MIB MODULE-IDENTITY LAST-UPDATED "200301110000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB Module for DS3/E3 interface configuration , statistics and Alarm configuration. This MIB is supported in T3/E3 service modules in MGX products. Some of the T3/E3 service modules(Cards) are: PXM1 : Processor Switch Module. CESM-T3E3: Circuit Emulation Service Module FRSM-VHS : Frame Relay Service Module. Includes T3 and Channelized T3 categories. FRSM-2CT3: Channelized FRSM Module SRM-3T3 : Service Resource Module Terminologies Used : SDH : SONET Digital Hierarchy PLCP : Physical Layer Convergence Procedure. BERT : Bit Error Rate Testing. FEAC : Far End Alarm Code. OOF : Out Of Frame. AIS : Alarm Indication Signal. LOF : Loss Of Frame. RAI : Remote Alarm Indication. HCS : Header Check Sequence HEC : Header Error Control MA byte : Maintenance and Adaptation byte Tx MA Byte: This is explained in ITU-T G.832 This Byte contains following fields: Payload type Payload dependent bits Timing maker bit Rx MA Byte: This is explained in ITU-T G.832 This Byte contains following fields: Payload type Timing maker bit " REVISION "200301110000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 59 }
ciscoMgx82xxDsx3MIB MODULE-IDENTITY LAST-UPDATED "200301110000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB Module for DS3/E3 interface configuration , statistics and Alarm configuration. This MIB is supported in T3/E3 service modules in MGX products. Some of the T3/E3 service modules(Cards) are: PXM1 : Processor Switch Module. CESM-T3E3: Circuit Emulation Service Module FRSM-VHS : Frame Relay Service Module. Includes T3 and Channelized T3 categories. FRSM-2CT3: Channelized FRSM Module SRM-3T3 : Service Resource Module Terminologies Used : SDH : SONET Digital Hierarchy PLCP : Physical Layer Convergence Procedure. BERT : Bit Error Rate Testing. FEAC : Far End Alarm Code. OOF : Out Of Frame. AIS : Alarm Indication Signal. LOF : Loss Of Frame. RAI : Remote Alarm Indication. HCS : Header Check Sequence HEC : Header Error Control MA byte : Maintenance and Adaptation byte Tx MA Byte: This is explained in ITU-T G.832 This Byte contains following fields: Payload type Payload dependent bits Timing maker bit Rx MA Byte: This is explained in ITU-T G.832 This Byte contains following fields: Payload type Timing maker bit " REVISION "200301110000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 59 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.59.2 | cmDsx3MIBConformance | 2 | 18 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.1 | ciscoWanAtmConnMIB | 2 | 103 | This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Term… |
| 1.3.6.1.4.1.351.150.2 | ciscoWanAtmConnStatMIB | 3 | 155 | This module contains ATM switch connection related real time statistical counter objects. |
| 1.3.6.1.4.1.351.150.3 | ciscoWANSonetMIB | 2 | 106 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
| 1.3.6.1.4.1.351.150.5 | ciscoWanTrapVarsMIB | 2 | 51 | This MIB module is for Supporting Varbinds used only in trap defintions. The NMS applications should not depend on the implementa… |
| 1.3.6.1.4.1.351.150.7 | ciscoMGX8800IfMappingMIB | 2 | 13 | This MIB module is used for getting the ifIndex values given physical location and/or logical information. The physical informati… |
| 1.3.6.1.4.1.351.150.9 | ciscoWanRpmConnExtMIB | 2 | 19 | This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Mo… |
| 1.3.6.1.4.1.351.150.10 | ciscoWanMgMIB | 2 | 85 | The MIB module for managing Media Gateways (MGs). Terms used: MG: Media Gateway MGC: Media Gateway Controller MGCP: Media Gatewa… |
| 1.3.6.1.4.1.351.150.11 | ciscoWanSrcpMIB | 2 | 51 | The MIB module for managing SRCP(Simple Resource Coordination Protocol) implementations. SRCP is a resource coordination protocol… |
| 1.3.6.1.4.1.351.150.15 | ciscoWanFeederMIB | 2 | 25 | This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Aut… |
| 1.3.6.1.4.1.351.150.16 | ciscoWanAtmCosbMIB | 2 | 29 | The MIB to manage CoS(Class of Service) queue/buffer related parameters. One or more virtual interfaces may exist on a physical in… |
| 1.3.6.1.4.1.351.150.17 | ciscoWanAal2ProfilesMIB | 2 | 17 | The MIB module for configuring AAL2 profile elements. This table will be used in AAL2 switching and trunking applications. |
| 1.3.6.1.4.1.351.150.18 | ciscoWanPersistentXgcpEventsMIB | 2 | 12 | The MIB module for managing CA(Call Agent) events. |
| 1.3.6.1.4.1.351.150.19 | ciscoWanT38FaxRelayMIB | 3 | 28 | The MIB module for configuring T.38 fax relay protocol parameters. This MIB will be used in VoIP(Voice over IP) applications. |
| 1.3.6.1.4.1.351.150.20 | ciscoWanRtpConnMIB | 3 | 46 | The MIB module is defined for establishing connection between an endpoint and another endpoint on a remote VISM in the case of Vo… |
| 1.3.6.1.4.1.351.150.21 | ciscoWanCodecGenParmMIB | 3 | 14 | This MIB provides configuration of Jitter buffer mode on a call and initial jitter delay value per Codec based. Prior to this, th… |
| 1.3.6.1.4.1.351.150.22 | ciscoWanMgcRedunMIB | 3 | 31 | The MIB module for Media Gateways (MGs) to allow multiple Media Gateway Controllers (MGCs) to be configured and managed on the Ga… |
| 1.3.6.1.4.1.351.150.23 | ciscoWanLapdTrunkMIB | 3 | 18 | The MIB module is defined for establishing a Trunk to transport PRI (Primary Rate Interface) signaling information over a RUDP (R… |
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | 3 | 83 | The MIB module is defined to configure the programmable Tone Plan feature on VISM. |
| 1.3.6.1.4.1.351.150.25 | ciscoWanAnnouncementMIB | 3 | 31 | The MIB module is defined to configure the Announcements feature on the Media Gateway Card. The Media Gateway Card will have the … |
| 1.3.6.1.4.1.351.150.30 | ciscoWanSrmMIB | 1 | 6 | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interf… |
| 1.3.6.1.4.1.351.150.31 | ciscoWanSrmBertMIB | 1 | 7 | The MIB Module for BERT(Bit Error Rate Testing) using Service Resource Module(SRM). This MIB module is used for BERT on FRSM, AUS… |
| 1.3.6.1.4.1.351.150.32 | ciscoWanBbifPortMIB | 1 | 8 | The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on … |
| 1.3.6.1.4.1.351.150.33 | ciscoWanBbifIlmiMIB | 1 | 6 | The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service mod… |
| 1.3.6.1.4.1.351.150.35 | ciscoWanBbifAtmConnMIB | 1 | 7 | The MIB module to configure the ATM Connections on a broad band interface in PXM1 Service module. |
| 1.3.6.1.4.1.351.150.36 | ciscoWanBbifAtmConnStatMIB | 1 | 5 | This MIB module contains ATM Connection related real time statistical counter objects. The ATM connections are applicable to PXM1… |
| 1.3.6.1.4.1.351.150.38 | ciscoMgx82xxVirtualPortMIB | 1 | 8 | The MIB module for configuration ond reporting statistics of virtual ports in PXM1 Service module in MGX82xx series. |
| 1.3.6.1.4.1.351.150.39 | ciscoMgx82xxDsx3BertMIB | 1 | 5 | The MIB Module for BERT (Bit Error Rate Testing) on ds3 interfaces in some of the cards (Service Modules) in MGX products. This M… |
| 1.3.6.1.4.1.351.150.40 | ciscoWanCesPortMIB | 1 | 7 | The MIB module to configure the Circuit Emulation Service(CES) ports. |
| 1.3.6.1.4.1.351.150.41 | ciscoWanCesRsrcPartMIB | 1 | 5 | The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service module… |
| 1.3.6.1.4.1.351.150.42 | ciscoWanCesConnMIB | 1 | 7 | The MIB module to configure the Circuit Emulation connections in MGX82xx series products. Terminology: CES : Circui… |
| 1.3.6.1.4.1.351.150.43 | ciscoWanCesConnStatMIB | 1 | 6 | The MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, … |
| 1.3.6.1.4.1.351.150.44 | ciscoWanFrPortMIB | 1 | 11 | The MIB module to create/configure frame relay ports/interfaces. This module contains tables related to frame relay port states a… |
| 1.3.6.1.4.1.351.150.45 | ciscoWanFrRsrcPartMIB | 1 | 5 | The MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI … |
| 1.3.6.1.4.1.351.150.46 | ciscoWanFrSignalingMIB | 1 | 8 | The MIB module to configure LMI and CLLM on a frame relay ports. This mib module also contains objects to represent LMI and CLLM s… |
| 1.3.6.1.4.1.351.150.47 | ciscoWanFrConnMIB | 1 | 11 | The MIB module to configure the Frame Relay connection configuration. Terminologies Used: SIW - Frame-Relay-to ATM Service Interw… |
| 1.3.6.1.4.1.351.150.48 | ciscoWanFrConnStatMIB | 1 | 7 | The MIB module for frame relay connection statistics. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking FECN … |
| 1.3.6.1.4.1.351.150.49 | ciscoWanFrX21MIB | 1 | 8 | The MIB module to configure X.21/HSSI physical and logical interfaces. This MIB module also contains alarm configuration of X.21 i… |
| 1.3.6.1.4.1.351.150.58 | ciscoMgx82xxDsx1MIB | 1 | 9 | The MIB module to configure DS1/E1 interface objects. This mib also contains the alarm configuration of DS1/E1 interfaces. This m… |
| 1.3.6.1.4.1.351.150.60 | ciscoMgx82xxRpmSubIfMIB | 1 | 5 | This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the… |
| 1.3.6.1.4.1.351.150.61 | ciscoMgx82xxRpmRsrcPartMIB | 1 | 5 | The MIB module to manage resource partition objects. A resource partition is configured on a RPM subinterface. An administrator c… |
| 1.3.6.1.4.1.351.150.62 | ciscoMgx82xxRpmConnMIB | 1 | 5 | The connection MIB module for RPM(Router Blade) service module in MGX8250/MGX8230 products. The 'channel' and 'connection' and 'c… |
| 1.3.6.1.4.1.351.150.63 | ciscoWanParMIB | 1 | 15 | The MIB module for configuring AutoRoute controller. The Portable AutoRoute(PAR) is a Controller providing routing capabilities i… |
| 1.3.6.1.4.1.351.150.67 | basisMIB | 0 | 0 | This MIB Contains OID subtrees used in some of the MIBs under 'stratacom' enterprise. |
| 1.3.6.1.4.1.351.150.69 | basisSerialMIB | 1 | 5 | The MIB module to configure serial ports in Processor Module and different Service Modules(cards) in MGX8850,MGX8250 and MGX8220 A… |
| 1.3.6.1.4.1.351.150.70 | ciscoMgx82xxEnvmonMIB | 1 | 6 | The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products. |
| 1.3.6.1.4.1.351.150.71 | ciscoMgx82xxAtmUniPortMIB | 1 | 6 | The MIB module containing objects related to user-side of the ATM UNI Port. The mib is applicable for MGX8250 and MGX8220 product… |
| 1.3.6.1.4.1.351.150.72 | ciscoMgx82xxPxmClockMIB | 1 | 8 | The MIB module to describe the clock configuration in Processor Switch Module(PXM) in MGX82xx product. Back cards supported for … |
| 1.3.6.1.4.1.351.150.73 | ciscoMgx82xxModuleRsrcPartMIB | 1 | 5 | The MIB module to configure the resource partition on service modules(cards) supported in MGX82xx and MGX88xx products. This MIB i… |
| 1.3.6.1.4.1.351.150.74 | ciscoMgx82xxCardFeatureMIB | 1 | 7 | The MIB module which describes the features supported in MGX82XX products. This MIB Module provides the features supported in Cont… |
| 1.3.6.1.4.1.351.150.79 | ciscoVismDsx1MIB | 1 | 18 | The MIB module to configure DS1/E1 interface objects in a Voice Interworking Service Module (VISM) module. This MIB is an extensi… |
| 1.3.6.1.4.1.351.150.80 | basisOnlineDiagMIB | 1 | 5 | This MIB contains information on the online diagnostics in MGX82xx(MGX8250, MGX8220, MGX8230 etc) products. |
| 1.3.6.1.4.1.351.150.81 | ciscoVismDsx0MIB | 1 | 12 | This MIB module contains ds0 configuration, Status and DS0 related information on a DS1 interface supported in VISM module. VISM i… |
| 1.3.6.1.4.1.351.150.82 | ciscoVismModuleMIB | 1 | 26 | This MIB module contains VISM Card specific attributes and call statistics information for VISM service module. |
| 1.3.6.1.4.1.351.150.86 | ciscoVismConnMIB | 1 | 8 | The MIB module to contains configuration and connection state information the VISM. For VoIP(Voice over IP) support, VISM needs o… |
| 1.3.6.1.4.1.351.150.87 | ciscoVismAtmTrunkMIB | 1 | 10 | The MIB module contain the Bearer and CID (Channel Identifier) connection information. |
| 1.3.6.1.4.1.351.150.88 | ciscoVismCasMIB | 1 | 7 | The MIB module contain the CAS backhaul feature in VISM |
| 1.3.6.1.4.1.351.150.89 | ciscoVismConnStatMIB | 1 | 11 | The MIB module contain VISM channel counters information. |
| 1.3.6.1.4.1.351.150.90 | ciscoVismSvcMIB | 1 | 8 | The MIB module containing SVC information for VISM service module. |
| 1.3.6.1.4.1.351.150.91 | ciscoVismHdlcMIB | 1 | 6 | The MIB module containing table for configurating and maintaining counters for the HDLC channel on VISM service module. |
| 1.3.6.1.4.1.351.150.92 | ciscoVismPortMIB | 1 | 5 | The MIB module containing Port information for VISM service module. |
| 1.3.6.1.4.1.351.150.93 | ciscoVismRsrcPartMIB | 1 | 5 | The MIB module containing Port Resource Partition information for VISM service module. |
| 1.3.6.1.4.1.351.150.94 | ciscoVismXgcpExtMIB | 1 | 8 | The MIB module contain the XGCP MIB feature in VISM |
| 1.3.6.1.4.1.351.150.95 | ciscoVismSessionMIB | 1 | 8 | The MIB module contain the RUDP session parameter. The relationship between session set, session group and RUDP session is that: … |
| 1.3.6.1.4.1.351.150.96 | ciscoVismCacMIB | 1 | 6 | The MIB module containing the CAC information for VISM service module. |
| 1.3.6.1.4.1.351.150.97 | ciscoVismCodecMIB | 1 | 8 | The MIB module contains tables for configurating and maintaining Codec on VISM service module. |