Rate limit in uplink direction, from wireless client to
network. The rate is per wireless client and
is in the range of <100-1,000,000> kbps.
If both wsCcRfWlanRateLimitingUp and
wsCcRfWlanRateLimitingDown are 0, it means use
the global rate limit available in
wsCcRfMuRateLimitingUp and wsCcRfMuRateLimitingDown.
If either wsCcRfWlanRateLimitingUp or
wsCcRfWlanRateLimitingDown is set, it means the other
is unlimited.
Parsed from file WS-CC-RF-MIB.mib.txt
Company: motorola
Module: WS-CC-RF-MIB
Vendor: Motorola
Module: WS-CC-RF-MIB (WS-CC-RF-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: Unsigned32
(
0|100..1000000 )
Automatically extracted from www.mibdepot.com
wsCcRfWlanRateLimitingUp OBJECT-TYPE SYNTAX Unsigned32 (0 | 100..1000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Rate limit in uplink direction, from wireless client to network. The rate is per wireless client and is in the range of <100-1,000,000> kbps. If both wsCcRfWlanRateLimitingUp and wsCcRfWlanRateLimitingDown are 0, it means use the global rate limit available in wsCcRfMuRateLimitingUp and wsCcRfMuRateLimitingDown. If either wsCcRfWlanRateLimitingUp or wsCcRfWlanRateLimitingDown is set, it means the other is unlimited." ::= { wsCcRfWlanEntry 37 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.388.14.3.2.1.14.1.1.1 | wsCcRfWlanIndex | 0 | 0 | Simple index. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.2 | wsCcRfWlanEnable | 0 | 0 | Enable/Disable wireless Lan. If this wlan is referenced by wsCcRfRadioBssWlanMap, a set to disabled mode will fail. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.3 | wsCcRfWlanDescr | 0 | 0 | Description the Wlan. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.4 | wsCcRfWlanEssid | 0 | 0 | ESSID of the WLAN. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.5 | wsCcRfWlanVlan | 0 | 0 | The Vlan this Wlan is associated with. If not associated with any Vlan, this value will be 0. This object's functionality has no… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.6 | wsCcRfWlanDisallowMuToMu | 0 | 0 | Set to true to prohibit MU-to-MU communication. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.7 | wsCcRfWlanSecBeacon | 0 | 0 | Enable the Secure Beacon checkbox to disallow the Access Port from broadcasting an ESSID in its beacons. This is a safeguard to p… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.8 | wsCcRfWlanVoicePrioritization | 0 | 0 | Enable voice prioritization. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.9 | wsCcRfWlanAnswerBroadcastEss | 0 | 0 | Answer broadcast ESS. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.10 | wsCcRfWlanMulticastAddr1 | 0 | 0 | Multicast address 1. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.11 | wsCcRfWlanMulticastAddr2 | 0 | 0 | Multicast address 2. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.12 | wsCcRfWlanWeight | 0 | 0 | The weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs ne… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.13 | wsCcRfWlanWmmEnable | 0 | 0 | Enable/Disable WMM on this wireless LAN |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.14 | wsCcRfWlanSvpEnable | 0 | 0 | Enable/Disable support for Spectralink Voice Prioritization on this wireless LAN |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.15 | wsCcRfWlanAuthentication | 0 | 0 | If auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the wireless authentication. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.16 | wsCcRfWlanEncryptionMap | 0 | 0 | ** this needs to be a bitmap of enc types ** If cryptoWep64 or cryptoWep128, additional WEP settings for this WLAN will be used f… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.17 | wsCcRfWlanBcastEnc | 0 | 0 | The broadcast encryption type in use on a WLAN. In most cases it is same as the unicast encryption type. When multiple encryption… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.18 | wsCcRfWlanNumRadiosAdopted | 0 | 0 | Number of radios adopted. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.19 | wsCcRfWlanUseDscp | 0 | 0 | Use Dscp when tagged. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.20 | wsCcRfWlanMuIdleTime | 0 | 0 | The number of seconds for which if the switch does not receive/send any data frames from/to an MU, it disassociates the MU. If an… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.21 | wsCcRfWlanMobilityEnable | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.22 | wsCcRfWlanGRETunnelIdx | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.23 | wsCcRfWlanGRETunnelGatewayIp | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.24 | wsCcRfWlanGRETunnelGatewayMask | 0 | 0 | Description. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.25 | wsCcRfWlanMuToMu | 0 | 0 | States the mode of operation for MU-to-MU communications in the wireless switch. drop(1): traffic is not relayed to other MUs. al… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.26 | wsCcRfWlanQosPrioritization | 0 | 0 | Sets the prioritization of the WLAN for QoS purposes. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.27 | wsCcRfWlanDynamicVlanAssignment | 0 | 0 | Enables or disables dynamic VLAN assignment for the WLAN. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.28 | wsCcRfWlanAccountingType | 0 | 0 | Indicates if the accounting type is Radius, Syslog or turned off. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.29 | wsCcRfWlanSyslogServerIp | 0 | 0 | IP Address of the Syslog server |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.30 | wsCcRfWlanSyslogServerPort | 0 | 0 | Port of the Syslog Server |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.31 | wsCcRfWlanNacMode | 0 | 0 | Set NAC mode to 1. Do NAC validation for all MU's except one in exclude list 2. By pass NAC validation for all MU's but include… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.32 | wsCcRfWlanQosWeight | 0 | 0 | Sets the weight of a WLAN. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.33 | wsCcRfWlanHoldTime | 0 | 0 | Hold time in seconds. The user credentials would hold for this much time when it leaves or roams away. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.34 | wsCcRfWlanIndependentModeEnable | 0 | 0 | If true, it means that the Independent mode for this WLAN is enabled. That allows it to be used by AAPs. A false value means that… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.35 | wsCcRfWlanClientBridgeBackhaulEnable | 0 | 0 | Enable client bridge backhaul. Requires wsCcRfWlanIndependentModeEnable to be True for this flag to be enabled. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.36 | wsCcRfWlanHttpAlgEnable | 0 | 0 | This object is used to enable or disable the HTTP ALG for this WLAN. Setting this object to true enables the HTTP ALG for the WL… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.38 | wsCcRfWlanRateLimitingDown | 0 | 0 | Rate limit in downlink direction, from network to wireless client. The rate is per wireless client and is in the range of <100-1,000,000> kbps. …100-1,000,000> |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.39 | wsCcRfWlan80211wMFPCfgStatus | 0 | 0 | The Management Frame Protection (MFP) configuration status for this WLAN. It can be set to: none(1), optional(2) or required(3).… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.40 | wsCcRfWlanSAQueryMaxTimeout | 0 | 0 | Specifies SA query maximum timeout in milliseconds. The default setting for max-timeout is This setting is only valid when ws… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.41 | wsCcRfWlanSAQueryRetryTimeout | 0 | 0 | Specifies SA query retry timeout in milliseconds. The default setting for retry-timeout is This setting is only valid when ws… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.42 | wsCcRfWlanDot11iSha256Enabled | 0 | 0 | Setting it to true(1) enables SHA-256 based stronger key generation algorithm to be used. This object is intended for future use… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.43 | wsCcRfWlanDenyStaticMUEnable | 0 | 0 | Setting this object to true enables dropping of packets from mobile-units not present in L3 extended ACL table. If DHCP is enfor… |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.44 | wsCcRfWlanAltAuthentication | 0 | 0 | Alternate object for WLAN authentication method. wsCcRfWlanAltEncryption must have the required value before setting this object. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.45 | wsCcRfWlanDot11Authentication | 0 | 0 | Authentication algorithm. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.46 | wsCcRfWlanSecurity | 0 | 0 | Security method. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.47 | wsCcRfWlanAltEncryption | 0 | 0 | Alternate object for WLAN authentication method. |
1.3.6.1.4.1.388.14.3.2.1.14.1.1.48 | wsCcRfWlanHotspotFailOverModeEnable | 0 | 0 | Hotspot fail over mode for wlan. |