Add an access port. The input string should have the following syntax:
dev_mac is the mac address of the Access Port's NIC.
dev_type must be one of 'ap300''ap200','ap100', 'ap3020' 'ap4131' or 'ap4121'.
For 'ap200' and ap300, radio1 will be considered to be of type 802.11a, and at least
one such radio definitely needs to be specified.
For 'ap100' 'ap4131' or 'ap4121', only provide the radio1_name value, since there can
be only one radio on a 'ap100' 'ap4131' or 'ap4121' accessport, and that one radio
definitely has the same MAC address as the device, and also, that one radio
is always an 802.11b radio.
Similarly, for a device of type 'ap3020', provide only radio1_name, since the
FH radio will have the same MAC as that of the device.
Note: The following characters cannot be part of radio1_name and radio2_name Name
field - ',.,,&, # and double quotes,
and the maximum characters allowed for each of these names are 50.
few synatx examples are given below:-
To add AP100 :
Note:radio_mac is optional for Ap100
To add AP3020-3021:
Note:radio mac is optioanl for AP3020
To add AP300:
Note:One can add only 'g' radio also.
To add AP200:
Note:One can add only 'a' radio also
To add AP4121:
Note:radio mac is optional for ap4121
To add AP4131:
Note:radio mac is optional for ap4131
Parsed from file SYMBOL-WS5000-MIB.mib.txt
Company: motorola
Module: SYMBOL-WS5000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ccAccessPortAddObj OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Add an access port. The input string should have the following syntax:
. dev_mac is the mac address of the Access Port's NIC. dev_type must be one of 'ap300''ap200','ap100', 'ap3020' 'ap4131' or 'ap4121'. For 'ap200' and ap300, radio1 will be considered to be of type 802.11a, and at least one such radio definitely needs to be specified. For 'ap100' 'ap4131' or 'ap4121', only provide the radio1_name value, since there can be only one radio on a 'ap100' 'ap4131' or 'ap4121' accessport, and that one radio definitely has the same MAC address as the device, and also, that one radio is always an 802.11b radio. Similarly, for a device of type 'ap3020', provide only radio1_name, since the FH radio will have the same MAC as that of the device. Note: The following characters cannot be part of radio1_name and radio2_name Name field - ',.,,&, # and double quotes, and the maximum characters allowed for each of these names are 50. few synatx examples are given below:- To add AP100 : ,ap100, , Note:radio_mac is optional for Ap100 To add AP3020-3021: ,ap3020, , Note:radio mac is optioanl for AP3020 To add AP300: ,ap300, , , , Note:One can add only 'g' radio also. To add AP200: ,ap200, , , , Note:One can add only 'a' radio also To add AP4121: ,ap4121, , Note:radio mac is optional for ap4121 To add AP4131: ,ap4132, , Note:radio mac is optional for ap4131 " ::= { symbolCCInterfaces 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.388.6.2.5.0 | ccAccessPortAddObj | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.388.6.2.1 | ccAPPolicyAddObj | 1 | 1 | Add one AP Policy object into the AP Policy table. The Maximum length of the AP Policy Name can be 50 characters, Note that the … |
1.3.6.1.4.1.388.6.2.2 | ccAPPolicyRemObj | 1 | 1 | Remove one AP Policy object from the AP Policy table. |
1.3.6.1.4.1.388.6.2.3 | ccEPPAddObj | 1 | 1 | Add one Ethernet policy object into the EPP table. The Maximum length of the Ethernet Policy Name can be 50 characters,Note that… |
1.3.6.1.4.1.388.6.2.4 | ccEPPRemObj | 1 | 1 | Remove one Ethernet policy object from the EPP table. The Maximum length of the Ethernet Policy Name can be 50 characters,Note t… |
1.3.6.1.4.1.388.6.2.6 | ccAccessPortRemObj | 1 | 1 | Remove an AccessPort syntax : When a ap200/ap300 Access port is removed both the radio macs are removed. |
1.3.6.1.4.1.388.6.2.7 | ccFWLanAddObj | 1 | 1 | Add a LAN to the system. |
1.3.6.1.4.1.388.6.2.8 | ccFWLanRemObj | 1 | 1 | Remove the LAN from the system. |
1.3.6.1.4.1.388.6.2.10 | ccAPTable | 1 | 46 | The Table of AccessPorts. |
1.3.6.1.4.1.388.6.2.11 | ccAPPolicyTable | 1 | 24 | APPolicy Table. |
1.3.6.1.4.1.388.6.2.12 | ccEPTable | 1 | 30 | EtherPorts entries. |
1.3.6.1.4.1.388.6.2.13 | ccEPPTable | 1 | 11 | A list of Ethernet port policy entries. |
1.3.6.1.4.1.388.6.2.14 | ccdot11FHPhyTable | 1 | 9 | The table for FH specific configuration parameters |
1.3.6.1.4.1.388.6.2.16 | ccAPPolicyObjects | 3 | 18 | None |
1.3.6.1.4.1.388.6.2.17 | ccFWLANTable | 1 | 11 | A list of LAN descriptors. Note:This Feature is VPN dependent feature hence if vpnsupport is not enabled then the walk over this … |
1.3.6.1.4.1.388.6.2.18 | ccFWLANNATTable | 1 | 4 | A list of LAN NAT Entries. This is a dual-index table, NAT entries for all LANs are displayed. A single entry of 0.0.0.0 for a L… |
1.3.6.1.4.1.388.6.2.19 | ccRouteTable | 1 | 9 | Display current network routing table. |
1.3.6.1.4.1.388.6.2.20 | ccRouteAddObj | 1 | 1 | Add route to the network routing table. Syntax:host or net |
1.3.6.1.4.1.388.6.2.21 | ccRouteRemObj | 1 | 1 | Remove route from the network routing table. Syntax:host or net |
1.3.6.1.4.1.388.6.2.22 | ccRouteFlush | 1 | 1 | Remove all routes from the network routing table. when set to True |
1.3.6.1.4.1.388.6.2.23 | ccDhcpSrvNIC1 | 22 | 61 | None |
1.3.6.1.4.1.388.6.2.24 | ccDhcpSrvNIC2 | 22 | 61 | None |