Vendor: MegaPAC
Module: SATELCOM-MIB
[Automatically extracted from oidview.com]
base OBJECT IDENTIFIER ::= { satelcom 2 }
base OBJECT IDENTIFIER ::= { satelcom 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397.2.1 | baseVersion | 1 | 1 | Software Version. The software version currently running. Defined as YMMR (i.e. Year, Month, Revision |
| 1.3.6.1.4.1.397.2.2 | baseRestartTime | 1 | 1 | BASE Restart Time. The time and data of the last system restart (i.e. power-on or last BOOT) |
| 1.3.6.1.4.1.397.2.3 | baseMaxPacketSize | 1 | 1 | Node Maximum Packet Size. The maximum single buffer size available on the MegaPAC. |
| 1.3.6.1.4.1.397.2.4 | baseBuffPoolMax | 1 | 1 | Node Buffer Pool Maximum. The maximum number of buffers available temporary storage of transitting data. |
| 1.3.6.1.4.1.397.2.5 | baseBuffPoolNow | 1 | 1 | Node Current Buffer Pool. The current number of free buffers available temporary storage of transitting data. |
| 1.3.6.1.4.1.397.2.6 | baseBufferPoolLowest | 1 | 1 | Node Buffer Pool Lowest. The lowest value the buffer pool has ever reached. |
| 1.3.6.1.4.1.397.2.7 | baseBufferPoolEmpty | 1 | 1 | Node Buffer Pool Empty. The number of times that the free buffer pool has fallen below the minimum buffer threshold 'baseBuffThre… |
| 1.3.6.1.4.1.397.2.8 | baseStatBufferThreshold | 1 | 1 | Node Buffer Threshold. When the number of buffers in the free buffer pool reaches this threshold, flow control will occur. |
| 1.3.6.1.4.1.397.2.9 | baseMemorySize | 1 | 1 | Node Memory Size. The size of the system memory installed in the MegaPAC. |
| 1.3.6.1.4.1.397.2.10 | baseDataFramesIn | 1 | 1 | Node Frames In. The total number of frames received by the MegaPAC. |
| 1.3.6.1.4.1.397.2.11 | baseDataFramesOut | 1 | 1 | Node Frames Out. The total number of frames transmitted by the MegaPAC. |
| 1.3.6.1.4.1.397.2.12 | baseDataFrameRateIn | 1 | 1 | Node Frame Rate In. The rate measured in frames per second that the MegaPAC is currently receiving frames. |
| 1.3.6.1.4.1.397.2.13 | baseDataFrameRateOut | 1 | 1 | Node Frames Rate Out. The rate measured in frames per second that the MegaPAC is currently transmitting frames. |
| 1.3.6.1.4.1.397.2.14 | baseTotalCallSetUps | 1 | 1 | Node Total Call Set ups. The total number of calls successfully established by the MegaPAC. |
| 1.3.6.1.4.1.397.2.15 | baseCurrentCalls | 1 | 1 | Current calls. The number of calls currently active on the MegaPAC. |
| 1.3.6.1.4.1.397.2.16 | baseRetransmissions | 1 | 1 | Node Retransmissions. The total number of frames which have been retransmitted by the MegaPAC. |
| 1.3.6.1.4.1.397.2.17 | baseRejects | 1 | 1 | Node Rejects. The total number of frames that have been rejected by the MegaPAC. |
| 1.3.6.1.4.1.397.2.18 | baseTotalTransportCalls | 1 | 1 | Node Total Transport calls. The total number of transport calls established by the MegaPAC. |
| 1.3.6.1.4.1.397.2.19 | baseCurrentTransportCalls | 1 | 1 | Current Transport Calls. The number of transport calls currently active on the MegaPAC. |
| 1.3.6.1.4.1.397.2.20 | baseRunStatus | 1 | 1 | Node Run Status. This parameter indicates whether the operating system has been 'Booted' from RAM (TELELOAD) or EPROM (default). |
| 1.3.6.1.4.1.397.2.21 | baseReports | 1 | 1 | Node Reporting channel. The name of the logical resource (channel) that the system reports will be directed to. |
| 1.3.6.1.4.1.397.2.22 | baseSessionStatistics | 1 | 1 | Node Session Statistics reporting channel. The name of the logical resource (channel) that the system session statistics will be … |
| 1.3.6.1.4.1.397.2.23 | baseBufferThreshold | 1 | 1 | Node Buffer Threshold. The threshold before flow control is invoked |
| 1.3.6.1.4.1.397.2.24 | baseInitialPresentationTimer | 1 | 1 | Node Initial Presentation Timer. The maximum time allowed between initial connection to the presentation service and the user ent… |
| 1.3.6.1.4.1.397.2.25 | baseSecondaryPresentationTimer | 1 | 1 | Node Secondary Presentation Timer. After a call has been cleared by the Host DTE the user has the option to use the presentation … |
| 1.3.6.1.4.1.397.2.26 | baseInactivityDetectTimer | 1 | 1 | Node Inactivity Timer. This timer will cause calls to be cleared if the IDLE option has been configured on the channel. |
| 1.3.6.1.4.1.397.2.27 | baseSegmentAccounting | 1 | 1 | Node Segment Accounting. This parameter causes the frames in/out parameters to be displayed in terms of 64 byte SEGMENTS rather t… |
| 1.3.6.1.4.1.397.2.28 | baseTerminalEmulationBuffers | 1 | 1 | Terminal Emulation Buffers. The number of system buffers allocated for Terminal Emulation purposes. |
| 1.3.6.1.4.1.397.2.29 | baseTransportBuffers | 1 | 1 | Transport Buffers. The number of transport buffers allocated for TP 0,2,3,4 sessions. |
| 1.3.6.1.4.1.397.2.30 | baseCountrySettings | 1 | 1 | Country Setting. Invokes the ASCII representation of the Japanese character set. |
| 1.3.6.1.4.1.397.2.31 | baseTeleloadEnabled | 1 | 1 | Teleload enable. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
| 1.3.6.1.4.1.397.2.32 | baseDefaultToPromCompatible | 1 | 1 | Cold Boot From PROM. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
| 1.3.6.1.4.1.397.2.33 | baseCommand | 1 | 1 | Allows SNMP manager to execute commands. |
| 1.3.6.1.4.1.397.2.34 | baseCommandControllerIndex | 1 | 1 | Sets controller index for baseCommands where relevant. |
| 1.3.6.1.4.1.397.2.35 | baseCommandChannelndex | 1 | 1 | Sets channel index for baseCommands where relevant. |
| 1.3.6.1.4.1.397.2.36 | baseConnectedToProtocol | 1 | 1 | Indicates the VCP state. NULL is VCP free; a returned value indicates BUSY and maps the access protocol. |
| 1.3.6.1.4.1.397.2.37 | baseBillingThreshold | 1 | 1 | Sets threshold for billing alarms - entry written to ELOG file, and trap sent. |
| 1.3.6.1.4.1.397.2.38 | baseBillUnread | 1 | 1 | Number of BILLING records outstanding - to be read by SNMP manager. |
| 1.3.6.1.4.1.397.2.39 | baseCurrentBill | 1 | 1 | Record number of current available BILLING record. |
| 1.3.6.1.4.1.397.2.40 | baseBillRecordBuffer | 1 | 1 | The current BILLING record data. |
| 1.3.6.1.4.1.397.2.41 | baseCurrentConfig | 1 | 1 | A decimal number from 0000 to 9999 representing the current configuration. |
| 1.3.6.1.4.1.397.2.44 | baseCommandBuffer | 1 | 1 | The VCP single line command string buffer. |
| 1.3.6.1.4.1.397.2.45 | baseCommandLength | 1 | 1 | The length in Hex of the single line command string. |
| 1.3.6.1.4.1.397.2.46 | baseEMPresent | 1 | 1 | Indicator of whether Environmental Monitor is present. |
| 1.3.6.1.4.1.397.2.47 | baseEMTempTens | 1 | 1 | Tens part of Environmental Monitor temperature. |
| 1.3.6.1.4.1.397.2.48 | baseEMTempUnits | 1 | 1 | Unit part of Environmental Monitor temperature. |
| 1.3.6.1.4.1.397.2.49 | baseEMFan1 | 1 | 1 | Environmental Monitor Fan 1 state. |
| 1.3.6.1.4.1.397.2.50 | baseEMFan2 | 1 | 1 | Environmental Monitor Fan 2 state. |
| 1.3.6.1.4.1.397.2.51 | baseEMFan3 | 1 | 1 | Environmental Monitor Fan 3 state. |
| 1.3.6.1.4.1.397.2.52 | baseEMVoltage | 1 | 1 | Environmental Monitor voltage. |
| 1.3.6.1.4.1.397.2.53 | baseEMPsu1 | 1 | 1 | Environmental Monitor PSU 1 state. |
| 1.3.6.1.4.1.397.2.54 | baseEMPsu2 | 1 | 1 | Environmental Monitor PSU 2 state. |
| 1.3.6.1.4.1.397.2.55 | baseCPUUtil | 1 | 1 | CPU utilisation in the range 0 to 100. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397.0 | errorLogReport | 0 | 0 | None |
| 1.3.6.1.4.1.397.1 | products | 34 | 34 | None |
| 1.3.6.1.4.1.397.3 | controller | 4 | 114 | None |
| 1.3.6.1.4.1.397.4 | channel | 3 | 160 | None |
| 1.3.6.1.4.1.397.5 | x25File | 2 | 9 | None |
| 1.3.6.1.4.1.397.6 | nameFile | 2 | 10 | None |
| 1.3.6.1.4.1.397.7 | passFile | 1 | 2 | None |
| 1.3.6.1.4.1.397.8 | macFile | 2 | 10 | None |
| 1.3.6.1.4.1.397.9 | ilanFile | 2 | 9 | None |
| 1.3.6.1.4.1.397.10 | elogFile | 2 | 6 | None |
| 1.3.6.1.4.1.397.32 | configChange | 0 | 0 | None |
| 1.3.6.1.4.1.397.33 | vcpConnect | 0 | 0 | None |
| 1.3.6.1.4.1.397.34 | vcpDisconnect | 0 | 0 | None |
| 1.3.6.1.4.1.397.35 | billThreshReached | 0 | 0 | None |
| 1.3.6.1.4.1.397.96 | linkNoResponse | 0 | 0 | None |
| 1.3.6.1.4.1.397.97 | linkCarrierLoss | 0 | 0 | None |
| 1.3.6.1.4.1.397.98 | linkAddressErr | 0 | 0 | None |
| 1.3.6.1.4.1.397.99 | frameLessThan2 | 0 | 0 | None |
| 1.3.6.1.4.1.397.100 | ifieldTooLarge | 0 | 0 | None |
| 1.3.6.1.4.1.397.103 | linkRestart | 0 | 0 | None |
| 1.3.6.1.4.1.397.104 | linkBlocked | 0 | 0 | None |
| 1.3.6.1.4.1.397.105 | linkDisconnect | 0 | 0 | None |
| 1.3.6.1.4.1.397.112 | linkFrmrRecvd | 0 | 0 | None |
| 1.3.6.1.4.1.397.113 | linkDmResponse | 0 | 0 | None |
| 1.3.6.1.4.1.397.114 | linkBadNr | 0 | 0 | None |
| 1.3.6.1.4.1.397.115 | linkDown | 0 | 0 | None |
| 1.3.6.1.4.1.397.116 | linkFrmrSent | 0 | 0 | None |
| 1.3.6.1.4.1.397.117 | crcThreshExceeded | 0 | 0 | None |
| 1.3.6.1.4.1.397.121 | linkManRestart | 0 | 0 | None |
| 1.3.6.1.4.1.397.122 | testIndicationResponse | 0 | 0 | None |
| 1.3.6.1.4.1.397.123 | interfaceFailure | 0 | 0 | None |
| 1.3.6.1.4.1.397.124 | xidComRecvd | 0 | 0 | None |
| 1.3.6.1.4.1.397.166 | bufferOverrun | 0 | 0 | None |
| 1.3.6.1.4.1.397.200 | connectTimeWarn | 0 | 0 | None |
| 1.3.6.1.4.1.397.230 | isdnNameAssigned | 0 | 0 | None |
| 1.3.6.1.4.1.397.231 | isdnNameDeAassigned | 0 | 0 | None |