A unique value for each X.25 subnetwork entity running LAPB
in the chassis. The value of this object matches the value
of the index of the corresponding X.25 subnetwork entity
running LAPB entry in the entity table of the chassis MIB.
Parsed from file ULPB.MIB.txt
Company: cai
Module: ULPB-MIB
Vendor: 3Com
Module: ULPB-MIB (ULPB.MIB)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ulpbAdmnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity running LAPB entry in the entity table of the chassis MIB." ::= { ulpbAdmnEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.9.1.1.2 | ulpbAdmnN2ReXmitVal | 0 | 0 | The maximum number of times a PDU is sent after the Ack, P-bit or Reject timer expires. It also limits RR w/P-bit sends with rem… |
| 1.3.6.1.4.1.429.1.9.1.1.3 | ulpbAdmnT1AckTime | 0 | 0 | The time interval during which the LAPB expects to receive a response to an outstanding IPDU or unexpected response to a sent unn… |
| 1.3.6.1.4.1.429.1.9.1.1.4 | ulpbAdmnTpfVal | 0 | 0 | The time interval during which the LAPB expects to receive a PDU with the F-bit set to 1 in response to a command with the P-bit … |
| 1.3.6.1.4.1.429.1.9.1.1.5 | ulpbAdmnTrejVal | 0 | 0 | The time interval during which the LAPB expects to receive a reply to a sent REJ TPDU. Value is in 0.1 second units. Default=25. |
| 1.3.6.1.4.1.429.1.9.1.1.6 | ulpbAdmnTbusyVal | 0 | 0 | The time interval during which the LAPB waits for an indication of the clearance of a busy condition at the other LAPB. Value is … |
| 1.3.6.1.4.1.429.1.9.1.1.7 | ulpbAdmnLinkIdleTime | 0 | 0 | The time interval during which the LAPB expexts to receive a PDU from the other LAPB. At expiration, the P/F cycle, which may re… |
| 1.3.6.1.4.1.429.1.9.1.1.8 | ulpbAdmnT2AckDelayTime | 0 | 0 | The maximum time delay before sending a delayed RR. This must be considerably less than the Ack time value. Value is in 0.1 sec… |
| 1.3.6.1.4.1.429.1.9.1.1.9 | ulpbAdmnRecKWindowSz | 0 | 0 | The maximum number of unacknowledged IPDUs that can be received before the acknowledgement RR must be sent. Default=3. |
| 1.3.6.1.4.1.429.1.9.1.1.10 | ulpbAdmnXmitKWindowSz | 0 | 0 | The maximum number of unacknowledged PDUs that may be sent before a response is required. Normal Mode = 1-7. Extended Mode = 1-127.… |
| 1.3.6.1.4.1.429.1.9.1.1.11 | ulpbAdmnLocProbe | 0 | 0 | The position before the window is closed at which an I PDU is sent with the P-bit set to solicit an acknowledgment from the recei… |
| 1.3.6.1.4.1.429.1.9.1.1.12 | ulpbAdmnMaxRecFrmSz | 0 | 0 | The maximum allowable received I frame size. It consists of X25 data + x25 protocol + LAPB protocol. Default=300. |
| 1.3.6.1.4.1.429.1.9.1.1.13 | ulpbAdmnIgnUaError | 0 | 0 | When the connection is in ERROR state, this parameter defines whether or not to ignore any UA frames received. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.14 | ulpbAdmnFrmrFrmrError | 0 | 0 | When the connection is in ERROR state, this parameter defines whether or not to re-transmit a frame reject if one is received. Def… |
| 1.3.6.1.4.1.429.1.9.1.1.15 | ulpbAdmnFrmrInvrspError | 0 | 0 | When the connection is in ERROR state, this parameter defines whether or not to transmit a frame reject if an invalid frame respo… |
| 1.3.6.1.4.1.429.1.9.1.1.16 | ulpbAdmnSframePbit | 0 | 0 | This parameter defines whether or not to send a frame reject if an S-Frame is received without the P-bit set. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.17 | ulpbAdmnDmOnAdm | 0 | 0 | This parameter defines whether or not to send a DM on entry to ADM state. Default=enable(2). |