When specifying a packet location via the offsetLength
semantics, this parameter indicates the length of the
bit field used in the Mask. Only the values one(1),
two(2), four(4), and six(6) are allowed.
If the length is not specified, the agent will
automatically determine the proper length based on
either the operand (a3filterUserMaskOperand) or the
matching values (a3filterUserMaskMatchType).
Parsed from file 3Com-filter.mib.txt
Company: None
Module: A3Com-Filter-r5-MIB
When specifying a packet location via the offsetLength
semantics, this parameter indicates the length of the
bit field used in the Mask. Only the values one(1),
two(2), four(4), and six(6) are allowed.
If the length is not specified, the agent will
automatically determine the proper length based on
either the operand (a3filterUserMaskOperand) or the
matching values (a3filterUserMaskMatchType).
Parsed from file A3Com-Filter-r5-MIB.mib
Module: A3Com-Filter-r5-MIB
Vendor: 3Com
Module: A3Com-Filter-r5-MIB (3Com-filter.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
a3filterUserMaskLocLength OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), reserved(3), four(4), rsvd(5), six(6) } ACCESS read-write STATUS mandatory DESCRIPTION "When specifying a packet location via the offsetLength semantics, this parameter indicates the length of the bit field used in the Mask. Only the values one(1), two(2), four(4), and six(6) are allowed. If the length is not specified, the agent will automatically determine the proper length based on either the operand (a3filterUserMaskOperand) or the matching values (a3filterUserMaskMatchType)." ::= { a3filterUserMaskEntry 6 }
a3filterUserMaskLocLength OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), reserved(3), four(4), rsvd(5), six(6) } ACCESS read-write STATUS mandatory DESCRIPTION "When specifying a packet location via the offsetLength semantics, this parameter indicates the length of the bit field used in the Mask. Only the values one(1), two(2), four(4), and six(6) are allowed. If the length is not specified, the agent will automatically determine the proper length based on either the operand (a3filterUserMaskOperand) or the matching values (a3filterUserMaskMatchType)." ::= { a3filterUserMaskEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.10.2.1.1 | a3filterUserMaskIndex | 0 | 0 | An index identifying a specific Mask. All user configured masks must have an index between 1 and 64. |
1.3.6.1.4.1.43.2.10.2.1.2 | a3filterUserMaskName | 0 | 0 | A text string used to help identify a specific Mask. Each entry must have a unique name. |
1.3.6.1.4.1.43.2.10.2.1.3 | a3filterUserMaskLocType | 0 | 0 | This object determines if this table entry specifies packet location via the mnemonic, protocol.field semantics or via the numeri… |
1.3.6.1.4.1.43.2.10.2.1.4 | a3filterUserMaskLocField | 0 | 0 | This object specifies the location in the packet where the operation should take place. This object takes effect only when a3fil… |
1.3.6.1.4.1.43.2.10.2.1.5 | a3filterUserMaskLocOffset | 0 | 0 | When specifying a packet location via the offsetLength semantics, this parameters indicates the offset from the beginning of the … |
1.3.6.1.4.1.43.2.10.2.1.7 | a3filterUserMaskOperator | 0 | 0 | This object, together with a3filterUserMaskOperand, cause bit operations to be performed on the bit field identified by a3filterU… |
1.3.6.1.4.1.43.2.10.2.1.8 | a3filterUserMaskOperand | 0 | 0 | This object, together with a3filterUserMaskOperator, cause bit operations to be performed on the bit field identified by a3filter… |
1.3.6.1.4.1.43.2.10.2.1.9 | a3filterUserMaskComparison | 0 | 0 | This object specifies the type of comparison to make between the output of the operation specified by a3filterUserMaskLocation, a… |
1.3.6.1.4.1.43.2.10.2.1.10 | a3filterUserMaskMatchType | 0 | 0 | a3filterUserMaskMatchtype |
1.3.6.1.4.1.43.2.10.2.1.11 | a3filterUserMaskMatchBits | 0 | 0 | A string of bits that is compared against the data at the specified location in the packet. This object is relevant only if a3fi… |
1.3.6.1.4.1.43.2.10.2.1.12 | a3filterUserMaskMatchValue1 | 0 | 0 | The value used to compare against the data at the specified location in the packet. This object is relevant only if the value of… |
1.3.6.1.4.1.43.2.10.2.1.13 | a3filterUserMaskMatchValue2 | 0 | 0 | The value used to compare against the data at the specified location in the packet. This object is used along with a3filterUserM… |
1.3.6.1.4.1.43.2.10.2.1.14 | a3filterUserMaskStatus | 0 | 0 | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. Not… |