This object determines whether another device
can access this system via SNMP. Note, once
SNMP access is disabled, the NMS will no longer
be able to access this system via SNMP.
If this is set to enabledTraps(1), the system
allows SNMP access and will send traps when
appropriate.
If this is set to enabledNoTraps(2), the system
allows SNMP access, but no traps will be sent.
If this is set to disabledTraps, the system
does not allow SNMP access, but will send
traps when appropriate.
If this is set to disabledNoTraps(4), the system
does not allow SNMP access and does not
send any traps.
Parsed from file a3Com-sys.mib.txt
Company: None
Module: A3Com-System-r4-MIB
This object determines whether another device
can access this system via SNMP. Note, once
SNMP access is disabled, the NMS will no longer
be able to access this system via SNMP.
If this is set to enabledTraps(1), the system
allows SNMP access and will send traps when
appropriate.
If this is set to enabledNoTraps(2), the system
allows SNMP access, but no traps will be sent.
If this is set to disabledTraps, the system
does not allow SNMP access, but will send
traps when appropriate.
If this is set to disabledNoTraps(4), the system
does not allow SNMP access and does not
send any traps.
Parsed from file A3Com-System-r8-MIB.mib
Module: A3Com-System-r8-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3sysSNMPAccess OBJECT-TYPE SYNTAX INTEGER { enabledTraps (1), enabledNoTraps (2), disabledTraps (3), disabledNoTraps (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether another device can access this system via SNMP. Note, once SNMP access is disabled, the NMS will no longer be able to access this system via SNMP. If this is set to enabledTraps(1), the system allows SNMP access and will send traps when appropriate. If this is set to enabledNoTraps(2), the system allows SNMP access, but no traps will be sent. If this is set to disabledTraps, the system does not allow SNMP access, but will send traps when appropriate. If this is set to disabledNoTraps(4), the system does not allow SNMP access and does not send any traps." ::= { a3ComAccCtl 4 }
a3sysSNMPAccess OBJECT-TYPE SYNTAX INTEGER { enabledTraps (1), enabledNoTraps (2), disabledTraps (3), disabledNoTraps (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether another device can access this system via SNMP. Note, once SNMP access is disabled, the NMS will no longer be able to access this system via SNMP. If this is set to enabledTraps(1), the system allows SNMP access and will send traps when appropriate. If this is set to enabledNoTraps(2), the system allows SNMP access, but no traps will be sent. If this is set to disabledTraps, the system does not allow SNMP access, but will send traps when appropriate. If this is set to disabledNoTraps(4), the system does not allow SNMP access and does not send any traps." ::= { a3ComAccCtl 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.13.7.4.0 | a3sysSNMPAccess | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.13.7.1 | a3sysRemoteAccess | 1 | 1 | This object determines whether another device can access this system via REMOTE |
1.3.6.1.4.1.43.2.13.7.2 | a3sysTelnetAccess | 1 | 1 | This object determines whether another device can access this system via TELNET |
1.3.6.1.4.1.43.2.13.7.3 | a3sysConsoleAccess | 1 | 1 | This object determines whether another device can access this system via the Console |
1.3.6.1.4.1.43.2.13.7.5 | a3sysSNMPCommTable | 1 | 5 | This table contains all the community strings known to the SNMP agent. |
1.3.6.1.4.1.43.2.13.7.6 | a3sysSNMPMgrTable | 1 | 5 | This table contains the Managers that are allowed to use the community strings identified in a3sysSNMPCommTable. Each Manager is … |
1.3.6.1.4.1.43.2.13.7.7 | a3sysTelnetMgrTable | 1 | 3 | This table contains the IP addresses that are allowed to use Telnet to access to the NetBuilder in the TelnetManager table. |
1.3.6.1.4.1.43.2.13.7.8 | a3sysPasswordTable | 1 | 6 | This table contains the system's passwords. |
1.3.6.1.4.1.43.2.13.7.9 | a3sysSnmpPasswordCtl | 1 | 1 | This object indicates whether this system's passwords can be changed via snmp. |