This group shows the Status Information for the BSU.
The aniBsuStatusRadioTable shows the information for
each radio that is connected to the BSU.
Parsed from file BSUSTATUS-MIB.mib
Module: BSUSTATUS-MIB
Vendor: Aperto Networks
Module: ANIROOT-MIB
[Automatically extracted from oidview.com]
aniBsuStatus MODULE-IDENTITY LAST-UPDATED "0209251510Z" ORGANIZATION "Aperto Networks" CONTACT-INFO " Postal: Aperto Networks Inc 1637 S Main Street Milpitas, California 95035 Tel: +1 408 719 9977 " DESCRIPTION "This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU. " ::= { bsu 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.1.1 | aniBsuStatusBootState | 0 | 0 | Shows the current state of the BSU. |
| 1.3.6.1.4.1.4325.3.1.2 | aniBsuStatusSysUpTime | 0 | 0 | Time for which the system has been up and running, displayed as a string in 'days hours mins secs' format. |
| 1.3.6.1.4.1.4325.3.1.3 | aniBsuStatusNumPortsConf | 0 | 0 | The number of wireless ports configured. |
| 1.3.6.1.4.1.4325.3.1.4 | aniBsuStatusNumPortsPresent | 0 | 0 | The number of wireless ports actually available. |
| 1.3.6.1.4.1.4325.3.1.5 | aniBsuStatusSuCounts | 0 | 0 | The total SUs linked to the BSU. |
| 1.3.6.1.4.1.4325.3.1.6 | aniBsuStatusCellName | 0 | 0 | The name of the Cell this BSU belongs to. When BSU is in point to point mode, this parameter is not applicable and will display a… |
| 1.3.6.1.4.1.4325.3.1.7 | aniBsuStatusCellRadius | 0 | 0 | The Cell Radius in km. When BSU is in point to point mode, this object can be referred to as link distance. |
| 1.3.6.1.4.1.4325.3.1.8 | aniBsuStatusSyncTimingRef | 0 | 0 | This flag shows whether timing reference is internal (1) or external (2) for this BSU. When BSU is running in point to point mode… |
| 1.3.6.1.4.1.4325.3.1.9 | aniBsuStatusRipFlag | 0 | 0 | This flag shows whether RIP is enabled(1) or disabled(2) for this BSU. This is always disabled when BSU is in bridge mode. |
| 1.3.6.1.4.1.4325.3.1.10 | aniBsuStatusMode | 0 | 0 | The mode of the BSU. |
| 1.3.6.1.4.1.4325.3.1.11 | aniBsuStatusRadioTable | 1 | 12 | This table shows the status of each radio that is connected to the BSU. The radio has to be operational for information to be dis… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | 13 | 79 | This group contains BSU Wireless Interface information. It shows parameters for each configured Wireless Port on the BSU. It disp… |
| 1.3.6.1.4.1.4325.3.3 | aniBsuStatistics | 4 | 35 | This group contains Statistical information for the BSU. aniBsuRfStatsTable shows the RF Port level statistics. aniBsuStatsBWGrou… |
| 1.3.6.1.4.1.4325.3.4 | aniBsuClock | 7 | 7 | This module is used to configure the clock time on the BSU. BSUs need to obtain and set their current clock time at boot up. Sus … |
| 1.3.6.1.4.1.4325.3.5 | aniBsuBridge | 1 | 1 | This group allows Configuration/Viewing of Bridging and Clustering parameters for BSU. Clusters can be added and deleted using Co… |
| 1.3.6.1.4.1.4325.3.6 | aniBsuMultSubnets | 1 | 4 | This group gives the BSU Multiple Subnets information. The aniBsuSubnetConfTable is used to view and configure subnets per wirel… |
| 1.3.6.1.4.1.4325.3.7 | aniBsuSuGroup | 4 | 62 | None |
| 1.3.6.1.4.1.4325.3.8 | aniBsuParam | 1 | 1 | This group contains other configurable parameters for the BSU. |
| 1.3.6.1.4.1.4325.3.11 | aniBsuVlan | 1 | 6 | This group shows the VLAN information for the BSU. |