This module is used to configure the clock time on the BSU. BSUs
need to obtain and set their current clock time at boot up.
Sus will communicate with the BSU during their own boot up
and set their own clock time to that of BSU.
Time at the BSU can be set either through SNTP or manually.
It is recommended to use SNTP to obtain time.
Parsed from file BSUCLK-MIB.mib
Module: BSUCLK-MIB
Vendor: Aperto Networks
Module: ANIROOT-MIB
[Automatically extracted from oidview.com]
aniBsuClock MODULE-IDENTITY LAST-UPDATED "0105091130Z" ORGANIZATION "Aperto Networks" CONTACT-INFO " Postal: Aperto Networks Inc 1637 S Main Street Milpitas, California 95035 Tel: +1 408 719 9977 " DESCRIPTION "This module is used to configure the clock time on the BSU. BSUs need to obtain and set their current clock time at boot up. Sus will communicate with the BSU during their own boot up and set their own clock time to that of BSU. Time at the BSU can be set either through SNTP or manually. It is recommended to use SNTP to obtain time. " ::= { bsu 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4325.3.4.1 | aniBsuClkSntpTimeZone | 0 | 0 | This is used to set the appropriate Time Zone offset from GMT. The format of data should be +Hour:Min or -Hour:Min. The valid Hou… |
1.3.6.1.4.1.4325.3.4.2 | aniBsuClkSntpDstEnable | 0 | 0 | This shows whether Daylight Saving is enabled or not. It gives user the option to incorporate Daylight Saving Time in the configu… |
1.3.6.1.4.1.4325.3.4.3 | aniBsuClkSntpDstStart | 0 | 0 | Used to specify the start of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h … |
1.3.6.1.4.1.4325.3.4.4 | aniBsuClkSntpDstEnd | 0 | 0 | Used to specify the end of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h - … |
1.3.6.1.4.1.4325.3.4.5 | aniBsuClkSntpEnable | 0 | 0 | This flag is used to enable(1) or disable(2) SNTP. It is recommended to use SNTP rather than manually setting the time to avoid e… |
1.3.6.1.4.1.4325.3.4.6 | aniBsuClkManualTime | 0 | 0 | Used to specify the local clock time manually. It should be entered in the 'mm/dd/yyyy hh:mm:ss' format that is, month/day/year h… |
1.3.6.1.4.1.4325.3.4.7 | aniBsuClkCurrentTime | 0 | 0 | The Current Time in 'mm/dd/yy hh:mm:ss' format, that is, month/day/year hour:minute:second. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4325.3.1 | aniBsuStatus | 11 | 23 | This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is con… |
1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | 13 | 79 | This group contains BSU Wireless Interface information. It shows parameters for each configured Wireless Port on the BSU. It disp… |
1.3.6.1.4.1.4325.3.3 | aniBsuStatistics | 4 | 35 | This group contains Statistical information for the BSU. aniBsuRfStatsTable shows the RF Port level statistics. aniBsuStatsBWGrou… |
1.3.6.1.4.1.4325.3.5 | aniBsuBridge | 1 | 1 | This group allows Configuration/Viewing of Bridging and Clustering parameters for BSU. Clusters can be added and deleted using Co… |
1.3.6.1.4.1.4325.3.6 | aniBsuMultSubnets | 1 | 4 | This group gives the BSU Multiple Subnets information. The aniBsuSubnetConfTable is used to view and configure subnets per wirel… |
1.3.6.1.4.1.4325.3.7 | aniBsuSuGroup | 4 | 62 | None |
1.3.6.1.4.1.4325.3.8 | aniBsuParam | 1 | 1 | This group contains other configurable parameters for the BSU. |
1.3.6.1.4.1.4325.3.11 | aniBsuVlan | 1 | 6 | This group shows the VLAN information for the BSU. |