The name used to identify the connection entry.
Parsed from file router.mib.txt
Company: None
Module: EICON-MIB-ROUTER
The name used to identify the connection entry.
Parsed from file EICON-MIB-ROUTER.mib
Module: EICON-MIB-ROUTER
Vendor: EICON
Module: EICON-MIB-ROUTER
[Automatically extracted from oidview.com]
rtConnName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The name used to identify the connection entry." ::= { rtConnEntry 2 }
rtConnName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The name used to identify the connection entry." ::= { rtConnEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.434.2.2.8.32.1.1 | rtConnIndex | 0 | 0 | The index used to identify the connection entry. |
1.3.6.1.4.1.434.2.2.8.32.1.3 | rtConnComment | 0 | 0 | Optional comment about the connection entry. |
1.3.6.1.4.1.434.2.2.8.32.1.4 | rtConnEntryStatus | 0 | 0 | The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not. |
1.3.6.1.4.1.434.2.2.8.32.1.5 | rtConnOperState | 0 | 0 | The object describing the state of the connection. |
1.3.6.1.4.1.434.2.2.8.32.1.6 | rtConnAdminStateCtr | 0 | 0 | The object used to start and stop the circuit for this connection entry. |
1.3.6.1.4.1.434.2.2.8.32.1.7 | rtConnAutoStart | 0 | 0 | The object used to indicate if the connnection should be activated every time the router starts. Yes is the default. |
1.3.6.1.4.1.434.2.2.8.32.1.8 | rtConnType | 0 | 0 | The type of connection. |
1.3.6.1.4.1.434.2.2.8.32.1.9 | rtConnInactivityTimeout | 0 | 0 | The connection inactivity timeout in seconds. |
1.3.6.1.4.1.434.2.2.8.32.1.10 | rtConnPortNumber | 0 | 0 | The EiconCard port number for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.11 | rtConnCompression | 0 | 0 | The object indicating the type of compression to use, if any. |
1.3.6.1.4.1.434.2.2.8.32.1.12 | rtConnRetryNum | 0 | 0 | The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default. |
1.3.6.1.4.1.434.2.2.8.32.1.13 | rtConnRetryDelay | 0 | 0 | The connection retry delay in seconds. |
1.3.6.1.4.1.434.2.2.8.32.1.14 | rtConnPeerRouter | 0 | 0 | The type of the peer router for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.15 | rtConnLanProtocol | 0 | 0 | The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4. |
1.3.6.1.4.1.434.2.2.8.32.1.16 | rtConnWanProtocol | 0 | 0 | The object indicates which WAN protocol will be used for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.17 | rtConnX25LocalDTE | 0 | 0 | The X25 Local DTE Address configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.18 | rtConnX25RemoteDTE | 0 | 0 | The X25 Remote DTE Address configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.19 | rtConnX25CallingFacilities | 0 | 0 | The X25 Calling Facilities configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.20 | rtConnX25ListeningFacilities | 0 | 0 | The X25 Listening Facilities configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.21 | rtConnX25UserData | 0 | 0 | The X25 User Data configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.22 | rtConnX25Pvc | 0 | 0 | The X25 PVC configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.23 | rtConnFrDlci | 0 | 0 | The Frame Relay DLCI configured for this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.24 | rtConnSnaPuName | 0 | 0 | Physical Unit Name. |
1.3.6.1.4.1.434.2.2.8.32.1.25 | rtConnSnaLocalFqName | 0 | 0 | Local fully qualified name. |
1.3.6.1.4.1.434.2.2.8.32.1.26 | rtConnSnaRemoteFqName | 0 | 0 | Remote fully qualified name. |
1.3.6.1.4.1.434.2.2.8.32.1.27 | rtConnSnaModeName | 0 | 0 | Mode name. |
1.3.6.1.4.1.434.2.2.8.32.1.28 | rtConnSnaSendPaceWindow | 0 | 0 | Send Pace Window. |
1.3.6.1.4.1.434.2.2.8.32.1.29 | rtConnSnaReceivePaceWindow | 0 | 0 | Receive Pace Window. |
1.3.6.1.4.1.434.2.2.8.32.1.30 | rtConnSnaRuSendLow | 0 | 0 | Request Unit send low. |
1.3.6.1.4.1.434.2.2.8.32.1.31 | rtConnSnaRuReceiveLow | 0 | 0 | Request Unit receive low. |
1.3.6.1.4.1.434.2.2.8.32.1.32 | rtConnSnaRuSendHigh | 0 | 0 | Request Unit send high. |
1.3.6.1.4.1.434.2.2.8.32.1.33 | rtConnSnaRuReceiveHigh | 0 | 0 | Request unit receive high. |
1.3.6.1.4.1.434.2.2.8.32.1.34 | rtConnUsage | 0 | 0 | The connection can be defined as a primary or a backup connection for a primary. |
1.3.6.1.4.1.434.2.2.8.32.1.35 | rtConnFrSegmentation | 0 | 0 | The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection. |
1.3.6.1.4.1.434.2.2.8.32.1.36 | rtConnFrXid | 0 | 0 | The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection |
1.3.6.1.4.1.434.2.2.8.32.1.37 | rtConnPrimOrBackName | 0 | 0 | This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry. |
1.3.6.1.4.1.434.2.2.8.32.1.38 | rtConnRipSapUpdateType | 0 | 0 | The update type of RIP / SAP. |
1.3.6.1.4.1.434.2.2.8.32.1.39 | rtConnSAPDelay | 0 | 0 | The delay in minutes between the SAP updates on this WAN connection. |
1.3.6.1.4.1.434.2.2.8.32.1.40 | rtConnRIPDelay | 0 | 0 | The delay in minutes between the RIP updates on this WAN connection. |