The high-water mark of frame buffer usage in this
switch. The initial value upon system reset is zero.
The high-water mark of frame buffer usage in this
switch. The initial value upon system reset is zero.
Parsed from file ESSWITCH-MIB.my.txt
Company: None
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
The high-water mark of frame buffer usage in this
switch. The initial value upon system reset is zero.
Parsed from file STAND-ALONE-ETHERNET-SWITCH-MIB.mib
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
sysInfoBuffersUsed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The high-water mark of frame buffer usage in this switch. The initial value upon system reset is zero." ::= { sysInfo 7 }
Vendor: Grand Junction Networks
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
[Automatically extracted from oidview.com]
sysInfoBuffersUsed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The high-water mark of frame buffer usage in this switch. The initial value upon system reset is zero." ::= { sysInfo 7 }
sysInfoBuffersUsed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The high-water mark of frame buffer usage in this switch. The initial value upon system reset is zero." ::= { sysInfo 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.437.1.1.3.1.7.0 | sysInfoBuffersUsed | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.437.1.1.3.1.1 | sysInfoFwdEngineRevision | 1 | 1 | Returns the revision number of the forwarding engine ASIC. |
1.3.6.1.4.1.437.1.1.3.1.2 | sysInfoBoardRevision | 1 | 1 | Returns the revision number of the switch main board on which the system firmware resides. |
1.3.6.1.4.1.437.1.1.3.1.3 | sysInfoTotalNumberOfPorts | 1 | 1 | The total number of physical network ports. fixed configuration - 27, 15 or 14 ports modular configuration - 25 - 41 ports T… |
1.3.6.1.4.1.437.1.1.3.1.4 | sysInfoNumberOfSwitchPorts | 1 | 1 | The number of ports that are individually switched. - 27, 15 or 14 switched ports. Each of these ports has hardware support for a… |
1.3.6.1.4.1.437.1.1.3.1.5 | sysInfoNumberOfSharedPorts | 1 | 1 | The number of ports that are collectively switched. fixed configuration - 0 ports modular configuration - 0 to 16 ports Hardwa… |
1.3.6.1.4.1.437.1.1.3.1.6 | sysInfoNumberOfInstalledModules | 1 | 1 | The number of high speed switched ports with installed and recognized modules. Hardware supported statistics are available for i… |
1.3.6.1.4.1.437.1.1.3.1.8 | sysInfoMaxBuffers | 1 | 1 | Number of times sysBuffersUsed has reached its maximum value and been reset to zero by the switch. The initial value is zero. |
1.3.6.1.4.1.437.1.1.3.1.9 | sysInfoUtilDisplay | 1 | 1 | The number of utilization meter LEDs currently lit on the front panel. |
1.3.6.1.4.1.437.1.1.3.1.10 | sysInfoAddrCapacity | 1 | 1 | The system-wide maximum number of addresses supported. This address capacity includes both dynamic and static address types. |
1.3.6.1.4.1.437.1.1.3.1.11 | sysInfoRestrictedStaticAddrCapacity | 1 | 1 | The system-wide maximum number of restricted static addresses supported. This object is a subset of sysInfoAddrCapacity. |
1.3.6.1.4.1.437.1.1.3.1.12 | sysInfoPOSTResult | 1 | 1 | A value which indicates the failures of some particular Power On Self Test (POST). The value is a sum. This sum initially takes … |
1.3.6.1.4.1.437.1.1.3.1.13 | sysInfoPortFailedPOSTMap | 1 | 1 | A bit array where the presence of a particular bit indicates a failure of a particular port, as determined by the POST 'individua… |
1.3.6.1.4.1.437.1.1.3.1.14 | sysInfoPortLinkDisplayMap | 1 | 1 | A bit array where the presence of a particular bit indicates a lit link LED for a port. Each octet within the value of this objec… |
1.3.6.1.4.1.437.1.1.3.1.15 | sysInfoPortDisabledDisplayMap | 1 | 1 | A bit array where the presence of a particular bit indicates a lit disabled LED for a port. Each octet within the value of this o… |
1.3.6.1.4.1.437.1.1.3.1.16 | sysInfoBroadcastStormLastTime | 1 | 1 | The last time a port exceeded broadcast threshold. This object is only valid if broadcast storm control is enabled at least once … |
1.3.6.1.4.1.437.1.1.3.1.17 | sysInfoPortExceedBroadcastStorm | 1 | 1 | The port where the broadcast threshold was last exceeded, if Broadcast Storm Control was enabled. The time when the event occurre… |
1.3.6.1.4.1.437.1.1.3.1.18 | sysInfoRedundantPowerState | 1 | 1 | Indicates the state of the redundant power supply. off : the switch is not connected to a redundant power source. healthy : … |
1.3.6.1.4.1.437.1.1.3.1.19 | sysInfoInternalPowerState | 1 | 1 | Indicates the state of the internal power supply. off : the internal power supply is off. on : the internal power supply is on. |
1.3.6.1.4.1.437.1.1.3.1.20 | sysInfoConfigFileStatus | 1 | 1 | The status of current or last succesful configuration download since the switch was initialized. The status contains the file nam… |
1.3.6.1.4.1.437.1.1.3.1.21 | sysInfoImageCapability | 1 | 1 | The software image capability supported. |