All station VCCs that operate on the port must run with the same traffic
prioritization dicipline. This port parameter specifies the priorization
as follows:
DISABLE - There is no prioritization of traffic within a VCC.
SEQUENCE - High priority and normal priority traffic are placed in separate
queues which are serviced in sequential round robin order.
PRIORITY - High priority and normal priority traffic are placed in separate
queues. The high priority queue is serviced completely before
the low priority queue.
Parsed from file atm_opt.mib.txt
Company: None
Module: ATM-OPT-MIB
All station VCCs that operate on the port must run with the same traffic
prioritization dicipline. This port parameter specifies the priorization
as follows:
DISABLE - There is no prioritization of traffic within a VCC.
SEQUENCE - High priority and normal priority traffic are placed in separate
queues which are serviced in sequential round robin order.
PRIORITY - High priority and normal priority traffic are placed in separate
queues. The high priority queue is serviced completely before
the low priority queue.
Parsed from file ATM-OPT-MIB.mib
Module: ATM-OPT-MIB
Vendor: Codex
Module: ATM-OPT-MIB
[Automatically extracted from oidview.com]
atmPCfgVCCTrafficPrioritization OBJECT-TYPE SYNTAX INTEGER { disable (1), sequence (2), priority (3) } ACCESS read-only STATUS mandatory DESCRIPTION "All station VCCs that operate on the port must run with the same traffic prioritization dicipline. This port parameter specifies the priorization as follows: DISABLE - There is no prioritization of traffic within a VCC. SEQUENCE - High priority and normal priority traffic are placed in separate queues which are serviced in sequential round robin order. PRIORITY - High priority and normal priority traffic are placed in separate queues. The high priority queue is serviced completely before the low priority queue." ::= { cdx6500PPCTATMPortEntry 9 }
atmPCfgVCCTrafficPrioritization OBJECT-TYPE SYNTAX INTEGER { disable (1), sequence (2), priority (3) } ACCESS read-only STATUS mandatory DESCRIPTION "All station VCCs that operate on the port must run with the same traffic prioritization dicipline. This port parameter specifies the priorization as follows: DISABLE - There is no prioritization of traffic within a VCC. SEQUENCE - High priority and normal priority traffic are placed in separate queues which are serviced in sequential round robin order. PRIORITY - High priority and normal priority traffic are placed in separate queues. The high priority queue is serviced completely before the low priority queue." ::= { cdx6500PPCTATMPortEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.2.1.1.35.1.1 | atmPCfgPortNumber | 0 | 0 | Port number of this port. |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.2 | atmPCfgPortType | 0 | 0 | Port type of the Port. |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.3 | atmPCfgMaxVPIRange | 0 | 0 | This parameter specifies the maximum VPI value that any station on this port can operate with. Increasing this value has the eff… |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.4 | atmPCfgMaxVCIRange | 0 | 0 | This parameter specifies the maximum VCI value that any station on this port can operate with. Increasing this value has the eff… |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.5 | atmPCfgLinkAssuranceTimer | 0 | 0 | If PVC Link Assurance Method is set to LOOPBACK, this is the amount of time in seconds between sending F5 loopback cells . |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.6 | atmPCfgLinkAssuranceCount | 0 | 0 | If PVC Link Assurance Method is set to LOOPBACK, this is the number of retries sent before declaring that the link is down . |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.7 | atmPCfgCCActDeactTimer | 0 | 0 | If PVC Link Assurance Method is set to NEGOTIATE CC cells this is the amount of time in seconds between retransmissions of Activ… |
1.3.6.1.4.1.449.2.1.2.1.1.35.1.8 | atmPCfgCCActDeactCount | 0 | 0 | If PVC Link Assurance Method is set to NEGOTIATE CC cells this is the number of times to send an Activate or Deactivate cell bef… |